Progress Lighting P7206-30EB Fluorescent Light Fixture User Manual

Product Overview

The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.

Slika 1: Prednja strana view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.

Sigurnosne informacije

UPOZORENJE: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.

• Ne instalirajte ovaj uređaj u vlažnom iliamp lokacijama.
• Osigurajte da je rasvjetno tijelo sigurno montirano na konstrukcijski element stropa.
• Koristite samo navedenu vrstu i snagu sijalicetage za sprečavanje pregrijavanja i oštećenja.
• Držite zapaljive materijale dalje od rasvjetnog tijela.

Sadržaj paketa

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.

• (1) P7206-30EB Fluorescent Light Fixture
• (1) Mounting Hardware Kit (screws, wire nuts, etc.)
• Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.

Specifikacije

Postavljanje i instalacija

Važno: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.

1. Pripremite prostor za instalaciju:
   • Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
   • Osigurajte da je površina za montažu čista, suha i strukturno čvrsta.
2. Montirajte uređaj:
   • Pažljivo izvadite uređaj iz ambalaže.
   • Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
   • Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
3. Električni priključci:
   • Connect the fixture's white wire to the white (neutral) wire from the outlet box using a wire nut.
   • Connect the fixture's black wire to the black (hot) wire from the outlet box using a wire nut.
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
   • Pažljivo uvucite sve žice u utičnicu.
4. Install Bulbs and Diffuser:
   • Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp holders. Ensure they are seated correctly.
   • Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
5. Vrati snagu:
   • Ponovo uključite napajanje na prekidaču ili kutiji s osiguračima.
   • Test the fixture to ensure it operates correctly.

Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.

Uputstvo za upotrebu

The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.

1. Uključivanje/isključivanje:
   • Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
   • Flip the wall switch to the "OFF" position to turn off the light.

Održavanje

Redovno održavanje osigurava optimalne performanse i dugotrajnost vaše rasvjete.

• čišćenje:
  • Prije čišćenja, provjerite je li napajanje uređaja isključeno prekidačem.
  • Wipe the exterior of the fixture and the acrylic diffuser with a soft, damp tkanina.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
  • Allow the fixture to dry completely before restoring power.
• Zamjena žarulje:
  • Isključite napajanje uređaja na prekidaču.
  • Carefully remove the acrylic diffuser.
  • Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
  • Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp držači.
  • Replace the acrylic diffuser.
  • Vratite napajanje i testirajte uređaj.

Rješavanje problema

Ako imate problema sa svojom rasvjetom, pogledajte sljedeće uobičajene probleme i rješenja:

If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.

Garancija i podrška

garancija: The Progress Lighting P7206-30EB fixture comes with a 1-godišnja ograničena garancija from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized repairs.

Korisnička podrška: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting webstranicu za najnovije kontakt informacije.

Molimo sačuvajte račun kao dokaz o kupovini u svrhu garancije.