EUROLITE ETD-35105 Electronic Dimmable Transformer

1. Uvod

The EUROLITE ETD-35105 is an electronic dimmable transformer designed for low-voltage halogen lamp systems. This compact unit provides a stable 11.6 V DC output from a 230 V AC input, making it suitable for various lighting applications such as track systems, recessed lights, pendant lamps i tabela lamps.

Ključne karakteristike uključuju:

• Kompaktne dimenzije za jednostavnu integraciju.
• Integrisana zaštita od kratkog spoja i preopterećenja.
• Integrated overheat protection circuit.
• Dimmable with both leading-edge (phase) and trailing-edge (phase-cut) dimmers.
• Soft start function for a smooth, gradually increasing current upon activation.

This product complies with the Electromagnetic Compatibility Directive 2004/108/EC and the Low Voltage Directive 73/23/EEG.

2. Sigurnosna uputstva

Molimo vas da pažljivo pročitate ova uputstva prije instalacije i upotrebe. Sačuvajte ovaj priručnik za buduću upotrebu.

• električna sigurnost: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the power supply before any installation, wiring, or maintenance work.
• Voltage: Osigurajte ulaznu voltage matches the transformer's rating (230 V AC, 50 Hz).
• Opterećenje: Do not exceed the specified load range of 35-105 W. Overloading can damage the transformer and connected lamps.
• Okruženje: Do not expose the transformer to moisture, water, or extreme temperatures. Ensure adequate ventilation to prevent overheating.
• Šteta: Do not operate the transformer if it appears damaged. Contact qualified personnel for inspection or repair.

3. Postavljanje i instalacija

The ETD-35105 transformer is designed for easy integration into various lighting systems. Follow these steps for proper installation:

3.1 Ožičenje

The transformer comes with fixed connection cables with open ends for both input and output.

• Input (Primary): Connect the 230 V AC, 50 Hz mains supply to the primary input terminals. Ensure correct polarity (Live and Neutral).
• Output (Secondary): Povežite svoj low-voltage halogen lamps (11.6 V DC) to the secondary output terminals. The transformer supports a load range of 35-105 W.

Važno: Ensure all connections are secure and insulated to prevent short circuits. The maximum cable length for the secondary side should not exceed 2 meters to maintain optimal performance.

3.2 Montaža

The compact design allows for flexible mounting. This transformer is suitable for rail mounting. Ensure the mounting location provides sufficient air circulation to prevent overheating.

Image 1: EUROLITE ETD-35105 Electronic Dimmable Transformer. This image shows the compact white casing of the transformer with its connection points and product label visible.

4. Operacija

Once properly installed and connected, the EUROLITE ETD-35105 transformer operates automatically. When power is supplied, the integrated soft start function ensures a gradual increase in current, extending the lifespan of your halogen lamps.

4.1 Funkcionalnost zatamnjenja

This transformer is compatible with standard leading-edge (phase control) and trailing-edge (phase-cut) dimmers. Connect a suitable dimmer to the primary (230V AC) input circuit to control the brightness of the connected halogen lamps. Ensure the dimmer's power rating is appropriate for the total load of the lamps.

5. Održavanje

The EUROLITE ETD-35105 electronic transformer requires minimal maintenance. It contains no user-serviceable parts.

• čišćenje: Ensure the transformer is disconnected from the power supply before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• inspekcija: Periodically check for any visible damage to the casing or cables. If damage is found, discontinue use and consult a qualified electrician.

6. Otkrivanje problema

If you encounter issues with your ETD-35105 transformer, refer to the following common troubleshooting steps:

• Nema izlaza svjetlosti:
  • Check if the main power supply is active.
  • Provjerite jesu li svi spojevi ožičenja sigurni i ispravni.
  • Ensure the halogen lamps are functional and correctly installed.
  • Check the dimmer (if used) for proper operation and compatibility.
• Trepereća svjetla:
  • Osigurajte ukupan vattage of the connected lamps is within the transformer's 35-105 W range.
  • Verify the dimmer is compatible with electronic transformers and is functioning correctly.
  • Provjerite ima li labavih spojeva.
• Transformer Overheating:
  • Ensure adequate ventilation around the transformer.
  • Check if the total load exceeds 105 W. Reduce the load if necessary.
  • The transformer has integrated overheat protection, which may temporarily shut down the unit. Allow it to cool down.
• No Dimming Function:
  • Confirm the dimmer is correctly wired and compatible with electronic transformers.
  • Ensure the dimmer is designed for leading-edge or trailing-edge control.

If the problem persists after these steps, consult a qualified electrician or contact Eurolite customer support.

7. Specifikacije

8. Garancija i podrška

This EUROLITE product is manufactured by Steinigke Showtechnic, a company known for reliable quality since 1979. For warranty information, technical support, or service inquiries, please refer to the official Eurolite websajtu ili kontaktirajte svog lokalnog prodavca.