Rocada RD-9100 Mobile Computer Desk Instruction Manual

1. Uvod

Thank you for choosing the Rocada RD-9100 Mobile Computer Desk. This desk is designed for versatility and convenience, featuring a pull-out keyboard tray and lockable wheels for easy mobility. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use of your new computer desk.

2. Sigurnosne informacije

• Prije montaže i upotrebe pažljivo pročitajte sva uputstva.
• Držite male dijelove podalje od djece tokom sastavljanja.
• Prije upotrebe provjerite jesu li svi vijci i pričvršćivači čvrsto zategnuti. Povremeno provjeravajte i po potrebi ponovo zategnite.
• Do not overload the desk. Refer to the specifications for weight capacity.
• Use the locking wheels to secure the desk in place when not moving it.
• Avoid placing hot items directly on the melamine surfaces without protection.
• Ne stojte i ne sjedite na stolu.

3. Sadržaj paketa

Prije početka montaže, provjerite da li su svi dijelovi prisutni i neoštećeni. Ako bilo koji dio nedostaje ili je oštećen, obratite se korisničkoj podršci.

• Main metal frame components
• Top melamine surface
• Middle melamine shelf
• Bottom melamine shelf
• Pull-out keyboard tray with metal slides
• Four wheels (two with locking mechanism)
• Assembly hardware (screws, bolts, Allen wrench, etc.)

4. Postavljanje i montaža

Assembly is required for this product. It is recommended to assemble the desk on a soft, clean surface to prevent scratches. Two people may be required for easier assembly.

4.1 Assembly Diagram and Dimensions

Figure 1: Assembly diagram with key dimensions.

4.2 Sastavljanje korak po korak

1. Attach Wheels to Base Frame: Secure the four wheels to the bottom metal frame using the provided screws. Ensure the two lockable wheels are positioned at the front for easy access.
2. Sastavljanje bočnih okvira: Connect the vertical metal supports to the base frame.
3. Instalirajte police: Slide the bottom, middle, and top melamine shelves into their designated slots or attach them to the frame using the appropriate hardware. Ensure they are oriented correctly.
4. Mount Keyboard Tray: Attach the metal slides to the underside of the top surface or designated area, then secure the pull-out keyboard tray to the slides. Ensure smooth operation. The keyboard tray can be installed for either left or right-handed use.
5. Zategnite sve pričvršćivače: Once all components are in place, carefully tighten all screws and bolts. Do not overtighten.

5. Uputstvo za upotrebu

5.1 Premještanje stola

To move the desk, ensure the locking mechanisms on the front wheels are disengaged. Gently push or pull the desk to its desired location. Avoid sudden movements or pushing over uneven surfaces.

5.2 Locking the Wheels

Once the desk is in position, engage the locking mechanisms on the two front wheels to prevent unintended movement. Press down on the lever or tab on each wheel until it clicks into place.

Figure 2: Detail of a wheel with its locking mechanism.

5.3 Using the Pull-Out Keyboard Tray

The keyboard tray slides smoothly on metal runners. Gently pull the tray outwards to use your keyboard and mouse. Push it back in when not in use to save space.

6. Održavanje

• čišćenje: Obrišite površine mekom, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals that may damage the melamine finish.
• Provjera hardvera: Povremeno provjeravajte sve vijke i šrafove kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite kako biste održali stabilnost.
• Njega kotača: Keep wheels free of debris to ensure smooth movement. If wheels become stiff, clean them and apply a small amount of silicone lubricant if needed.

7. Otkrivanje problema

• Stol se ljulja: Check all assembly screws and bolts. Ensure they are fully tightened. Make sure the desk is on a level surface.
• Kotači se ne kotrljaju glatko: Check for debris (hair, dust) caught in the wheels. Clean them thoroughly. Ensure the locking mechanism is fully disengaged.
• Keyboard tray sticking: Check the metal slides for any obstructions or damage. Ensure the slides are properly aligned and lubricated if necessary.
• Nedostajući dijelovi tokom montaže: Refer to the package contents list. If parts are genuinely missing, contact customer support with your purchase details.

8. Specifikacije

9. Informacije o garanciji

This Rocada product is covered by a limited manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided at the time of purchase or contact Rocada customer support.

10. Korisnička podrška

If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact Rocada customer support. Contact information can typically be found on the product packaging or the official Rocada website.