1. Uvod
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Gira 010800 Toggle Switch Insert, Metallic Single. Please read this manual thoroughly before installation and keep it for future reference. This product is designed for commercial and private use.
Figure 1: Gira 010800 Toggle Switch Insert, Metallic Single. This image shows the front view of the metallic toggle switch insert.
2. Sigurnosne informacije
UPOZORENJE: Electrical installation should only be performed by a qualified electrician in accordance with local wiring regulations and standards. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Uvijek isključite napajanje na glavnom prekidaču ili razvodnoj kutiji prije nego što pokušate bilo kakvu instalaciju, održavanje ili popravku.
- Uvjerite se da su svi priključci sigurni i pravilno izolirani.
- Nemojte prekoračiti navedeni volumentage i wattage ocjene.
- Držite proizvod podalje od vlage i ekstremnih temperatura.
- Ovaj proizvod je dizajniran samo za upotrebu u zatvorenom prostoru.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- 1 x Gira 010800 Toggle Switch Insert (2-way)
- Uputstvo za upotrebu (ovaj dokument)
Napomena: Faceplates and mounting frames are sold separately and are not included with this insert.
4. Postavljanje i instalacija
This Gira 010800 switch is a 2-way (SPDT - Single Pole Double Throw) toggle switch insert designed for wall mounting. It requires a compatible Gira frame and cover plate (not included).
4.1 Potreban alat
- Screwdriver (flat-head and/or Phillips, depending on terminal type)
- Skidači žice
- Voltage tester
- Insulating tape (optional)
4.2 Upute za ožičenje
- Isključite napajanje: Locate the circuit breaker or fuse that controls the power to the switch location and turn it OFF. Verify power is off using a voltage tester.
- Uklonite stari prekidač (ako je primjenjivo): Carefully remove the existing switch from the wall box. Disconnect the wires, noting their positions.
- Pripremite žice: Skinite izolaciju s krajeva električnih žica u dužini od otprilike 10-12 mm.
- Spojite žice: The Gira 010800 is a 2-way switch, meaning it has three terminals: a common terminal (often marked 'L' or 'COM') and two switched terminals (often marked '1' and '2' or 'L1' and 'L2').
- Connect the incoming live wire (from the power source) to the common terminal.
- Connect the two outgoing switched wires (to the light fixture or other load) to the two switched terminals.
- Ensure all screw terminals are tightened securely to prevent loose connections.
- Mount the Switch Insert: Place the switch insert into the wall box. Secure it using the mounting screws provided with your Gira frame.
- Install Frame and Cover Plate: Attach the Gira frame and then the desired cover plate over the switch insert.
- Vrati snagu: Once installation is complete and all components are securely in place, turn the power back ON at the circuit breaker.
Napomena: For detailed wiring diagrams specific to your application (e.g., controlling one light from two locations), consult a qualified electrician.
5. Uputstvo za upotrebu
The Gira 010800 is a simple toggle switch. To operate:
- Press the top part of the toggle to switch the connected device (e.g., light) ON.
- Press the bottom part of the toggle to switch the connected device OFF.
This 2-way switch allows for control of a single load from two different locations when wired correctly with another 2-way switch.
6. Održavanje
The Gira 010800 switch requires minimal maintenance.
- čišćenje: To clean the surface of the switch, gently wipe with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the metallic finish.
- inspekcija: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, disconnect power and consult a qualified electrician.
- Nema dijelova koje korisnik može servisirati: There are no user-serviceable parts inside the switch mechanism. Do not attempt to disassemble the unit.
7. Otkrivanje problema
If you experience issues with your Gira 010800 switch, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Light/Device does not turn ON/OFF |
|
|
| Prekidač je labav ili klimav |
|
|
| Switch is hot to the touch |
|
|
Ako problem i dalje postoji nakon što ste pokušali pronaći ova rješenja, obratite se kvalificiranom električaru ili Gira korisničkoj podršci.
8. Specifikacije
| Broj modela | 010800 |
| Brand | Gira |
| Vrsta prekidača | Toggle Switch (2-way) |
| Voltage | 250 Volt |
| Wattage | 100 Watt |
| Materijal | Metal |
| Boja | Metalik |
| Vrsta montaže | Zidni nosač |
| Dimenzije | 5 x 5 x 5 cm |
| Težina | 68 grama |
| Certifikacija | VDE |
| Način rada | UKLJUČENO ISKLJUČENO |
| Terminal Type | Screw or Solder |
| Kontakt materijal | Srebrna legura |
9. Garancija i podrška
Gira products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Gira webSačuvajte dokaz o kupovini za slučaj reklamacije.
For technical support, spare parts, or further assistance, please contact Gira customer service through their official website or authorized distributors. Always provide the model number (010800) when seeking support.
Gira Official Webstranica: www.gira.com
