Sealey SA2 Pneumatski udarni odvijač s pogonom 1/2 kvadratna metra Uputstvo za upotrebu

1. Uvod i sigurnosne informacije

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Sealey SA2 Air Impact Wrench. Please read and understand all instructions before using the tool.

Opća sigurnosna upozorenja:

• Uvijek nosite odgovarajuću ličnu zaštitnu opremu, uključujući zaštitu za oči, zaštitu za sluh i rukavice.
• Ensure the air supply is disconnected before changing accessories, performing maintenance, or when the tool is not in use.
• Do not exceed the maximum operating pressure specified for the tool.
• Držite ruke i odeću dalje od pokretnih delova.
• Use only genuine Sealey replacement parts and accessories.
• Maintain the tool in good working condition and check for damage before each use.

Figure 1: Sealey SA2 Air Impact Wrench. This image shows the overall design of the impact wrench, highlighting its robust construction and ergonomic grip.

2. Proizvod je gotovview

The Sealey SA2 Air Impact Wrench is a powerful pneumatic tool designed for various fastening and loosening tasks in garage, tire shop, and general workshop environments. It features a durable rocking-dog hammer mechanism and a hardened impact anvil for reliable performance.

Ključne karakteristike:

• Fitted with a standard 1/2" Sq drive anvil.
• Equipped with a robust rocking-dog hammer mechanism.
• Hardened impact anvil for extended durability.
• Four-position adjustable air/torque control.
• Reversible action for both tightening and loosening applications.

Figure 2: Key features of the Sealey SA2 Air Impact Wrench. This diagram illustrates the 1/2" Sq drive anvil, fastening and breakaway torque specifications, and the 4-position adjustable air/torque control with reversible action.

3. Podešavanje

1. Priključak za dovod zraka: Connect the impact wrench to a clean, dry, regulated air supply. Ensure the air hose has an internal diameter of at least 3/8 inch (10 mm) and is fitted with a suitable quick-release coupling. The recommended operating pressure is 90 psi (6.2 bar).
2. podmazivanje: Before first use and daily thereafter, add a few drops of air tool oil into the air inlet. This is crucial for the longevity and performance of the tool. The tool is marked "OIL DAILY!" as a reminder.
3. Početna provjera: Before connecting to the air supply, ensure the trigger is not depressed. Once connected, briefly run the tool to confirm proper operation and lubrication.
4. Dodatak za utičnicu: Select the appropriate 1/2" Sq drive impact socket for your application and firmly attach it to the anvil.

4. Uputstvo za upotrebu

1. Izbor smjera: Use the F/R (Forward/Reverse) selector switch, typically located near the trigger, to choose the desired direction of rotation. "F" is for fastening (clockwise), and "R" is for loosening (counter-clockwise).
2. Podešavanje obrtnog momenta: The tool features a four-position adjustable air/torque control. This allows you to regulate the power output for different applications. Start with a lower setting and increase as needed to prevent overtightening or damage to fasteners.
3. Pričvršćivanje:
   • Set the direction to "F" (Forward).
   • Place the socket firmly onto the fastener.
   • Pritisnite okidač da biste pokrenuli alat. Otpustite okidač da biste ga zaustavili.
   • For critical applications, always use a torque wrench to achieve the final specified torque.
4. Otpuštanje:
   • Set the direction to "R" (Reverse).
   • Place the socket firmly onto the fastener.
   • Pritisnite okidač da biste pokrenuli alat. Otpustite okidač da biste ga zaustavili.

5. Održavanje

Regular maintenance ensures the longevity and optimal performance of your Sealey SA2 Air Impact Wrench.

• Dnevno podmazivanje: Add a few drops of high-quality air tool oil into the air inlet before each use. This lubricates the internal components and prevents corrosion.
• Air Line Maintenance: Ensure your air compressor's drain valve is opened daily to release accumulated moisture. Regularly check and clean the air filter and lubricator (if installed) in your air supply system.
• Generalno čišćenje: Keep the tool clean and free from debris. Wipe down the exterior with a clean cloth. Do not use solvents that may damage the rubber or plastic components.
• inspekcija: Periodically inspect the tool for any signs of wear, damage, or loose fasteners. Pay close attention to the anvil, trigger, and air connections. Replace worn or damaged parts immediately.
• Skladištenje: When not in use, store the impact wrench in a clean, dry, and secure location, away from direct sunlight and extreme temperatures.

6. Otkrivanje problema

If you encounter issues with your Sealey SA2 Air Impact Wrench, refer to the following common troubleshooting steps:

For issues not covered here, or if problems persist, please contact Sealey customer support or an authorized service center.

7. Specifikacije

8. Garancija i podrška

The Sealey SA2 Air Impact Wrench comes with a 1-godišnja garancija. This warranty covers defects in materials and workmanship under normal use. Please refer to the official Sealey website or your purchase documentation for full terms and conditions.

Figure 3: Sealey 1 Year Guarantee. This image indicates the product is covered by a one-year warranty, with terms and conditions applying.

For technical support, warranty claims, or to purchase genuine replacement parts, please contact Sealey customer service through their official channels. Always provide your product model number (SA2) and proof of purchase when seeking support.

Kontakt informacije: Please visit the official Sealey webstranicu za najnovije kontakt podatke i resurse za podršku.