Uvod
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your EBARA 50DWXU6.75S2 DOMINATOR Manual Sewage Pump. Please read this manual thoroughly before installation or operation to ensure proper use and to prevent injury or damage.
The EBARA 50DWXU6.75S2 is a robust 1 HP sewage pump designed for reliable performance in demanding applications, featuring stainless steel construction for durability.
Sigurnosne informacije
UPOZORENJE: Nepoštivanje ovih uputa može dovesti do ozbiljnih povreda ili smrti.
- Always disconnect power before servicing or installing the pump.
- Osigurajte da svi električni priključci budu u skladu s lokalnim propisima i propisima.
- Do not operate the pump in explosive atmospheres.
- Nosite odgovarajuću ličnu zaštitnu opremu (LZO) tokom instalacije i održavanja.
- This pump is designed for sewage and effluent. Do not use for flammable liquids or potable water.
Postavljanje i instalacija
Proper installation is critical for the pump's performance and longevity. Consult a qualified professional if you are unsure about any step.
Kontrolna lista prije instalacije:
- Verify power supply matches pump requirements (1 x 230V).
- Ensure adequate space for pump placement and maintenance access.
- Inspect the pump for any shipping damage.
Koraci instalacije:
- Pozicioniranje: Place the pump on a solid, level surface in the sump or basin. Ensure it is not resting directly on sludge or debris.
- Ispusni cjevovodi: Connect the discharge piping to the pump's outlet. Use a check valve to prevent backflow and a gate valve for isolation during maintenance.
- Električni priključak: Connect the pump to a dedicated electrical circuit with proper overcurrent protection. All wiring must be done by a licensed electrician and conform to local electrical codes.
- testiranje: After installation, fill the sump with water and cycle the pump several times to ensure proper operation and check for leaks.
Figure 1: EBARA 50DWXU6.75S2 DOMINATOR Manual Sewage Pump. This image shows the overall view of the stainless steel pump, highlighting its compact design and the discharge flange at the bottom.
Uputstvo za upotrebu
The EBARA 50DWXU6.75S2 is a manual pump, meaning its operation is controlled externally, typically by a control panel or float switch system (not included with the pump itself).
Prvo pokretanje:
- Ensure the pump is fully submerged in the liquid to be pumped.
- Verify all piping connections are secure and leak-free.
- Turn on the power supply to the pump's control circuit.
- Activate the pump manually via its control panel or by raising the float switch (if installed) to initiate pumping.
Normalan rad:
The pump will operate when activated and will continue to pump until manually shut off or until the liquid level drops below its intake, depending on the control system used. Avoid running the pump dry for extended periods, as this can cause damage.
Održavanje
Regular maintenance ensures optimal performance and extends the life of your pump. Always disconnect power before performing any maintenance.
Routine Checks (Monthly):
- Sump/Basin inspekcija: Check the sump for excessive debris or sludge buildup that could impede pump operation.
- Kućište pumpe: Inspect the pump for any visible damage or corrosion.
- Ispusna linija: Ensure the discharge line is clear and free of obstructions.
- Test rada: Manually cycle the pump to ensure it starts and stops correctly and pumps efficiently.
Godišnje održavanje:
- Consider having a qualified technician inspect the motor, impeller, and seals for wear.
- Clean the pump thoroughly to remove any accumulated residue.
Rješavanje problema
Before attempting any repairs, ensure the power supply to the pump is disconnected.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Pumpa se ne pokreće. | No power; tripped breaker; faulty wiring; motor issue. | Check power supply and breaker. Inspect wiring. Consult technician for motor issues. |
| Pump runs but does not pump liquid. | Air lock; clogged impeller/intake; discharge line obstruction. | Bleed air from system. Clear any blockages from impeller or intake. Check discharge line for clogs. |
| Ciklusi pumpi prečesto. | Check valve failure; small sump; control issue. | Inspect/replace check valve. Evaluate sump size. Check control system settings. |
Specifikacije
- Model: 50DWXU6.75S2
- Brand: EBARA
- konjske snage (KS): 1 HP
- Voltage: 1 x 230V
- Materijal: nerđajući čelik
- Težina artikla: 41 funte
- Dimenzije paketa: 23 x 11 x 10 inča
- Izvor napajanja: AC/DC
Garancija i podrška
For specific warranty information, please refer to the documentation provided with your purchase or contact EBARA customer service directly. Keep your purchase receipt as proof of purchase.
For technical support, parts, or service inquiries, please contact EBARA customer support or an authorized service center. Contact details can typically be found on the manufacturer's official webweb-mjestu ili na ambalaži proizvoda.
Note: Protection plans may be available from third-party providers, but these are separate from the manufacturer's warranty.
