La Crosse Technology WS-9117U-IT-CBP Wireless Temperature Station User Manual

1. Uvod

This manual provides instructions for the setup, operation, and maintenance of your La Crosse Technology WS-9117U-IT-CBP Wireless Temperature Station. This device monitors both indoor and outdoor temperatures, displaying them on a digital screen along with time and date information.

The system consists of a main receiver unit and a wireless outdoor sensor. The receiver displays current indoor temperature, outdoor temperature, time, date, and records of minimum and maximum temperatures with timestamps.

2. Sadržaj paketa

• 1x WS-9117U-IT-CBP Wireless Temperature Station Receiver
• 1x TX29U-IT Wireless Outdoor Temperature Sensor
• 1x Detachable Stand for Receiver
• Mounting Hardware for Sensor

Napomena: 2 AAA alkaline batteries for the receiver and 2 AA alkaline batteries for the sensor are required and sold separately.

3. Podešavanje

3.1 Instalacija baterije

Prijemna jedinica:

1. Remove the battery cover on the back of the receiver unit.
2. Insert 2 new AAA alkaline batteries according to the polarity markings (+ and -).
3. Vratite poklopac baterije.

Outdoor Sensor (TX29U-IT):

1. Open the battery compartment on the back of the TX29U-IT sensor.
2. Insert 2 new AA alkaline batteries according to the polarity markings (+ and -).
3. Close the battery compartment securely to ensure weather resistance.

Slika 1: Receiver and Sensor with Battery Compartments. This image illustrates the main receiver unit and the outdoor sensor, highlighting where batteries are inserted in each device.

3.2 Postavljanje senzora

For accurate outdoor temperature readings, place the TX29U-IT sensor in a shaded area, away from direct sunlight and heat sources. Ensure it is sheltered from direct rain and snow to prevent damage, while allowing for adequate air circulation.

• The sensor transmits data up to 330 feet (100 meters) in open air at a 915 MHz frequency. Walls and other obstructions will reduce this range.
• Mount the sensor vertically using the provided hardware.

Slika 2: Recommended Sensor Placement. This image demonstrates an ideal outdoor location for the sensor, ensuring it is protected from direct weather elements and sunlight for accurate readings.

3.3 Početna sinhronizacija

After installing batteries in both units, the receiver will automatically attempt to connect with the outdoor sensor. This process may take a few minutes. Ensure both units are within range during initial setup. If the outdoor temperature does not appear, press the "SEARCH" button on the receiver to initiate a manual search for the sensor.

4. Uputstvo za upotrebu

4.1 Prikaz prekoview

Slika 3: Receiver LCD Display. This image provides a detailed view of the receiver's digital screen, indicating the layout of indoor temperature, outdoor temperature, time, and date information.

The digital screen displays the following information:

• Trenutna unutrašnja temperatura
• Trenutna vanjska temperatura
• Time (12-hour or 24-hour format)
• Datum
• Minimum and Maximum Temperature Records with Time Stamp

4.2 Podešavanje vremena i datuma

The unit features a quartz clock. To set the time and date:

1. Pritisnite i držite "POSTAVI" button (or similar button, refer to specific unit markings) until the time display begins to flash.
2. Koristite "+" or "-" buttons to adjust the flashing value (e.g., hour, minute).
3. Pritisnite "POSTAVI" again to confirm the setting and move to the next adjustable item.
4. Ponavljajte dok ne konfigurirate sve postavke vremena i datuma.
5. The unit supports 12-hour or 24-hour time formats. This can typically be toggled during the time setting process.

4.3 Prikaz temperature (Fahrenheit/Celzijus)

To switch between Fahrenheit (°F) and Celsius (°C) temperature display, press the "°F/°C" button, usually located on the back or side of the receiver unit.

4.4 Minimum and Maximum Temperature Records

The receiver automatically records the minimum and maximum indoor and outdoor temperatures. To view ovi zapisi:

• Pritisnite "MIN/MAX" button once to display the maximum recorded temperatures.
• Pritisnite "MIN/MAX" button a second time to display the minimum recorded temperatures.
• Pritisnite "MIN/MAX" button a third time to return to the current temperature display.
• To clear the recorded minimum and maximum values, press and hold the "MIN/MAX" button while the min/max values are displayed.

4.5 Adding Additional Sensors

The temperature station can accommodate up to three outdoor sensors. To add an additional sensor (sold separately), install batteries in the new sensor and then press the "CHANNEL" or "SEARCH" button on the receiver to cycle through channels or initiate a search for new sensors. Follow the pairing instructions provided with the additional sensor.

5. Održavanje

• Zamjena baterije: Replace batteries annually or when the low battery indicator appears on the display. Use only alkaline batteries.
• Održavanje senzora: While the sensor is designed to withstand fog or mist, it should be sheltered from direct rain and prolonged exposure to harsh weather conditions to ensure longevity and accurate readings.
• čišćenje: Clean the display and sensor with a soft, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.

6. Otkrivanje problema

7. Specifikacije

8. Garancija i podrška

This product is covered under a limited 1-year warranty from the date of purchase. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official La Crosse Technology website.

Za dodatnu podršku i informacije o proizvodu, možete posjetiti Trgovina tehnologijom La Crosse na Amazonu.