1. Uvod
The Creative Inspire 5.1 Digital 5500 speaker system is designed to enhance audio experiences for video gaming and DVD movie playback. This system features five satellite speakers, a powerful wooden subwoofer, a decoder with Dolby Digital and Dolby Pro Logic technologies, and a wireless remote control. It supports connectivity to various audio sources through digital optical, digital coaxial, and analog stereo input jacks. The system delivers 48 watts RMS power, with 6 watts for each satellite speaker and 18 watts for the subwoofer.
2. Sadržaj paketa
Molimo Vas da provjerite da li se u Vašem paketu nalaze sve dolje navedene stavke:
- Three (3) Front Satellite Speakers
- Two (2) Rear Satellite Speakers
- One (1) Subwoofer
- Kablovi za zvučnike
- One (1) Decoder Box
- One (1) Wireless Remote Control
- Baterije za daljinski upravljač
- Desktop Stands for Satellite Speakers
- Facedown Monitor Stand for Center Speaker
- Adapter za napajanje
- Vodič za brzi početak
- Korisnički priručnik (ovaj dokument)
3. Upute za postavljanje
- Položaj zvučnika:
- Position the three front satellite speakers (left, center, right) in front of your listening area. The center speaker should be directly in front of you, typically above or below your display.
- Place the two rear satellite speakers (left rear, right rear) behind your listening area, ideally at ear level.
- Position the subwoofer on the floor, preferably in a corner or near a wall, to optimize bass response.
- Povežite satelitske zvučnike sa subwooferom:
Connect each satellite speaker to the corresponding output on the subwoofer using the provided speaker cables. Ensure correct polarity (positive to positive, negative to negative).
- Connect Subwoofer to Decoder:
Connect the subwoofer to the decoder box using the appropriate cable.
- Connect Decoder to Audio Source:
Choose one of the following connection methods based on your audio source:
- Digitalni optički: Connect an optical cable from your DVD player, game console, or PC's optical output to the decoder's digital optical input.
- Digital Coaxial: Connect a coaxial cable from your audio source's coaxial output to the decoder's digital coaxial input.
- Analog Stereo: Connect an analog stereo cable (RCA or 3.5mm jack, depending on your source) from your audio source to the decoder's analog stereo input.
- Priključite napajanje:
Connect the power adapter to the decoder box, then plug the power adapter into a wall outlet.
4. Uputstvo za upotrebu
- Uključivanje/isključivanje:
Press the Power button on the decoder box or the wireless remote control to turn the system on or off. An indicator light will confirm the power status.
- Odabir ulaza:
Use the Input button on the decoder or remote to cycle through available audio inputs (Digital Optical, Digital Coaxial, Analog Stereo) until your desired source is selected.
- Kontrola jačine zvuka:
Adjust the master volume using the Volume Up/Down buttons on the remote or the volume knob on the decoder. Individual channel levels (front, rear, center, subwoofer) may also be adjustable via the remote for fine-tuning.
- Dolby Digital / Dolby Pro Logic:
When a compatible digital audio signal (Dolby Digital) is detected, the system will automatically process it for 5.1 surround sound. For stereo sources, the Dolby Pro Logic mode can be engaged (if available on your decoder) to simulate surround sound.
- daljinski upravljač:
The wireless remote provides convenient control over power, input selection, volume, and potentially individual speaker levels and sound modes. Ensure batteries are correctly installed.
5. Održavanje
- čišćenje: Use a soft, dry cloth to clean the speaker surfaces. Avoid abrasive cleaners or solvents.
- ventilacija: Ensure the subwoofer and decoder have adequate ventilation to prevent overheating. Do not block vents.
- Upravljanje kablovima: Keep cables organized and away from foot traffic to prevent damage and tripping hazards.
- Okruženje: Izbjegavajte izlaganje sistema ekstremnim temperaturama, vlazi ili direktnoj sunčevoj svjetlosti.
6. Otkrivanje problema
- Nema zvuka:
- Ensure the system is powered on and the volume is not muted or set too low.
- Verify that the correct input source is selected on the decoder.
- Check all cable connections between the audio source, decoder, subwoofer, and satellite speakers.
- Confirm the audio source (e.g., DVD player, PC) is outputting sound.
- Izobličen ili loš kvalitet zvuka:
- Reduce the volume to check if distortion is due to excessive loudness.
- Ensure speaker cables are securely connected and not damaged.
- Provjerite audio postavke na izvornom uređaju.
- Verify that the speakers are correctly positioned and not obstructed.
- Daljinski upravljač ne radi:
- Zamijenite baterije u daljinskom upravljaču.
- Ensure there are no obstructions between the remote and the decoder's IR receiver.
- Point the remote directly at the decoder.
7. Specifikacije
| Broj modela | 51MS0000AA001 |
| Konfiguracija zvučnika | 5.1-kanalni surround zvuk |
| Ukupna RMS snaga | 48 vati RMS |
| Snaga satelitskih zvučnika | 6 Watts RMS per channel (5 channels) |
| Snaga subwoofera | 18 vati RMS |
| Audio dekodiranje | Dolby Digital, Dolby Pro Logic |
| Ulazna povezanost | Digital Optical, Digital Coaxial, Analog Stereo |
| Kontrolni metod | Bežični daljinski upravljač |
| Izvor napajanja | Cable Electric (Power Adapter) |
| Težina proizvoda | 12.7 kg (približno 28 funte) |
| Dimenzije paketa | 40.64 x 30.48 x 30.48 cm |
8. Garancija i podrška
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Creative webSačuvajte dokaz o kupovini za slučaj reklamacije.
Online resursi: For the latest drivers, software, and support documentation, please visit www.creative.com/support (npramplink, stvarni link se može razlikovati).
