Global G-2

Global Knives 8" Chef's Knife G-2 Standard Instruction Manual

Model: G-2 | Brand: Global

Uvod

The Global G-2 8-inch Chef's Knife is a versatile kitchen tool designed for mincing, cutting, chopping, and slicing. Manufactured in Japan, this knife features a blade crafted from high-tech molybdenum/vanadium stainless steel, known for its ability to retain a sharp edge. The blade is face-ground with a long taper, contributing to its lasting sharpness. The stainless-steel handle is molded for comfort and dimpled to provide a secure, slip-resistant grip. Its lightweight design and balanced construction, achieved by injecting sand into the hollow handle, enhance maneuverability. A finger notch between the blade and handle is incorporated for user safety.

Global G-2 8-inch Chef's Knife, front view

Slika: Front view of the Global G-2 8-inch Chef's Knife, showcasing its sleek design and dimpled handle.

Ključne karakteristike

  • Lightweight, precisely balanced 8-inch (20cm) chef's knife.
  • Blade constructed from high-tech molybdenum/vanadium stainless steel.
  • Edge designed to retain razor sharpness exceptionally well.
  • Stainless-steel handle molded for comfort and dimpled for a safe grip.
Diagram illustrating Global G-2 Chef's Knife features

Image: Diagram highlighting key features such as hygienic one-piece structure, iconic design, rust resistance, 15° cutting edge, weighted hollow handle, and long-lasting edge retention.

Setup

Početno čišćenje

Before first use, hand wash the knife with warm, soapy water and dry it thoroughly. This removes any manufacturing residues and prepares the knife for use.

Uputstvo za upotrebu

Opća upotreba

The Global G-2 Chef's Knife is designed for a variety of kitchen tasks. Use it for:

  • Mljevenje: Finely chop herbs, garlic, or ginger.
  • sjeckanje: Prepare vegetables like onions, carrots, and celery.
  • rezanje: Cut meats, poultry, and larger vegetables with precision.
  • Pripremni radovi: Handle general food preparation tasks efficiently.

Always use a stable cutting surface, such as a wooden or soft plastic cutting board, to protect the blade's edge.

Pravilno prianjanje

Hold the knife with a firm but relaxed grip. The dimpled handle is designed to prevent slipping. For optimal control, grip the handle with your dominant hand, placing your thumb on one side of the blade and your index finger on the opposite side, just above the handle.

Global G-2 Chef's Knife in use, chopping an onion

Image: The Global G-2 Chef's Knife being used to chop an onion on a wooden cutting board.

Njega i održavanje

Čišćenje

Samo pranje ruku: Global knives should be hand washed immediately after each use with warm, soapy water. Rinse thoroughly and dry completely with a soft cloth to prevent water spots and protect the edge. Ne perite u mašini za pranje sudova, as harsh detergents and high temperatures can damage the blade and handle.

Oštrenje

To maintain the razor sharpness of your Global knife, use a ceramic sharpener or a diamond steel. These are recommended over traditional metal sharpening steels. For more intensive sharpening, a synthetic whetstone, ceramic whetstone, or a Shinkansen sharpener can be used. Global also offers a Sharpening Guide Rail to assist in honing blades at the proper angle.

Skladištenje

Always store Global knives in a safe, dry environment. It is recommended to store them in a dedicated knife block or on a magnetic knife rack to protect the blade and prevent accidental injury.

Global G-2 Chef's Knife resting on a wooden cutting board

Image: The Global G-2 Chef's Knife on a cutting board, illustrating proper storage away from other utensils.

Rješavanje problema

Dull Edge

If the knife's edge becomes dull, refer to the "Sharpening" section under Care and Maintenance. Regular honing and occasional sharpening will restore its cutting performance.

Rust Spots

Although made of stainless steel, prolonged exposure to moisture or harsh chemicals can lead to rust spots. Ensure the knife is thoroughly dried after washing and stored in a dry place. Minor rust spots can often be removed with a non-abrasive cleaner designed for stainless steel.

Specifikacije

Broj modelaG-2
Materijal oštriceMolybdenum/Vanadium Stainless Steel
Materijal ručkenerđajući čelik
Blade EdgePlain
Blade Length8 inča (20 cm)
Tip konstrukcijeStamped
Težina artikla0.49 funte (7.8 unce)
Može se prati u mašini za pranje sudovaNe (preporučuje se ručno pranje)
ProizvođačYoshikin

Garancija i podrška

The Global G-2 Chef's Knife comes with a lifetime warranty against defects and breakage. For warranty claims or product support, please contact Global customer service through their official websajtu ili ovlašćenim prodavcima.

Povezani dokumenti - G-2

Preview GLOBAL UP 1515 VF-AUT Uputstvo za upotrebu šivaće mašine sa jednom iglom i hodajućom stopicom
Ovaj sveobuhvatni priručnik pruža upute za upotrebu i informacije o dijelovima za GLOBAL UP 1515 VF-AUT, šivaću mašinu s jednom iglom, ravnom platformom i hodajućim stopalom opremljenu bočnim nožem. Dizajnirana za šivanje debelih materijala kao što su automobilski jastuci, sofe, torbice i šatori, ova industrijska mašina nudi sinhrono uvlačenje, glatko šivanje i veliku brzinu i nisku razinu buke.
Preview GLOBAL WF 9221-76 serija - Priručnik za dijelove | Dijagrami i komponente
Detaljan priručnik s dijelovima za šivaću mašinu GLOBAL WF 9221-76 serije, s dijagramima i popisima komponenti za identifikaciju i nabavku rezervnih dijelova za industrijsku šivaću opremu. Posjetite www.globalsew.com za više informacija.
Preview Global Tri-Temp dozator vode 670435 Uputstvo za upotrebu
Zvanični priručnik s uputama za Global Tri-Temp dozator vode (Model 670435), u kojem su detaljno opisani postupci postavljanja, rada, održavanja i rješavanja problema. Uključuje sigurnosne mjere i specifikacije.
Preview Global SV 550 Uputstvo za upotrebu servo motora za uštedu energije
Sveobuhvatno uputstvo za upotrebu bezčetkičnog motora industrijske šivaće mašine Global SV 550, koje obuhvata sigurnost, predstavljanje proizvoda, instalaciju, podešavanje parametara, ekološke zahtjeve i rješavanje problema.
Preview Global ZZ 1366-3S-76-P Upute i upute za dijelove za šivaću mašinu
Ovaj priručnik pruža detaljna uputstva i liste dijelova za Global ZZ 1366-3S-76-P, mašinu za šivanje sa dugom rukom, ekstra teškim uslovima rada, jednom iglom, cik-cak šivaćim bodom.
Preview Upute za upotrebu klima uređaja Breezonic Performance & Performance Plus
Sveobuhvatna uputstva za upotrebu, vodič za održavanje i specifikacije za Eberspacher Breezonic Performance i Performance Plus klima uređaje koji se koriste u rekreacijskim vozilima (RV) i karavanima.