1. Uvod
This manual provides comprehensive service and workshop instructions for the Yanmar Marine Diesel Engines models 3YM30, 3YM20, and 2YM15. It is intended for qualified personnel performing maintenance, repair, and overhaul procedures. Adherence to the guidelines within this manual is crucial for ensuring the safe, efficient, and long-term operation of your engine.
Image: Front cover of the service manual, displaying 'YANMAR MARINE DIESEL ENGINE 3YM30/3YM20/2YM15 SERVICE MANUAL' and 'maritime press' logo.
2. Initial Setup and Pre-Operation Checks
Before operating the engine after any service, repair, or initial installation, it is imperative to perform a series of pre-operation checks to ensure all systems are functioning correctly and safely. This section outlines critical steps.
2.1. Fluid Level Verification
- motorno ulje: Check the engine oil level using the dipstick. Ensure it is between the 'MIN' and 'MAX' marks. Add recommended oil if necessary.
- rashladna tečnost: Verify the coolant level in the expansion tank. It should be at the specified level. Top up with appropriate coolant mixture if low.
- gorivo: Confirm sufficient fuel in the tank and check for any air in the fuel lines, bleeding if required.
2.2. System Integrity Check
- Crijeva i Clamps: Inspect all hoses for cracks, wear, or leaks. Ensure all clamps are tight and secure.
- pojasevi: Verify the tension and condition of all drive belts (e.g., alternator, raw water pump).
- Električni priključci: Check battery terminals and all electrical connections for corrosion and tightness.
3. Operativne smjernice
While this manual primarily focuses on service, understanding proper operating procedures is vital for engine health and longevity. Always refer to the engine's dedicated operator's manual for detailed instructions.
3.1. Pokretanje motora
- Provjerite je li mjenjač u neutralnom položaju.
- Turn the ignition key to the 'ON' position and wait for pre-heat indicators (if applicable) to extinguish.
- Turn the key to 'START' and release once the engine fires. Do not crank for more than 10 seconds at a time.
3.2. Engine Monitoring During Operation
- Continuously monitor engine temperature, oil pressure, and charging voltage.
- Listen for unusual noises or vibrations.
- Observe exhaust for abnormal smoke color.
4. Procedure održavanja
Regular and timely maintenance is critical for the optimal performance and extended lifespan of your Yanmar marine diesel engine. This section outlines key maintenance tasks.
4.1. Routine Checks (Daily/Before Operation)
- Provjerite nivo motornog ulja.
- Inspect coolant level.
- Check raw water strainer for debris.
- Inspect drive belts for tension and condition.
- Look for any signs of fuel, oil, or coolant leaks.
4.2. Scheduled Maintenance Intervals
The following table provides a general guide for scheduled maintenance. Always refer to the specific service schedule provided by Yanmar for your engine model.
| Interval | Zadatak | Bilješke |
|---|---|---|
| Svakih 50 sati / Godišnje | Zamijenite motorno ulje i filter | Use recommended oil type. |
| Svakih 100 sati / Godišnje | Inspect fuel filter / water separator | Drain water/sediment. Replace if necessary. |
| Svakih 250 sati / Godišnje | Replace fuel filter element | Ensure proper bleeding after replacement. |
| Every 500 Hours / Bi-annually | Inspect/Adjust valve clearances | Requires specialized tools and knowledge. |
| Every 1000 Hours / 5 Years | Zamijenite rashladnu tečnost | Flush system thoroughly. |
5. Rješavanje uobičajenih problema
This section provides a guide to diagnosing and resolving common operational issues with your Yanmar marine diesel engine. For complex problems, consult an authorized service technician.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Motor se ne uspijeva pokrenuti | Niska zapremina baterijetage Nema goriva Vazduh u sistemu goriva Neispravan starter motor | Napunite bateriju Provjerite nivo goriva Odzračivanje sistema goriva Inspect/replace starter |
| Engine Overheats | Low coolant level Clogged raw water strainer Neispravan termostat Habanje impelera | Dopuniti rashladnu tečnost Očistite sito Test/replace thermostat Replace raw water pump impeller |
| Excessive Smoke | Black Smoke: Overloading, dirty injectors Blue Smoke: Burning oil Bijeli dim: Unburnt fuel, water in combustion | Reduce load, clean injectors Check oil level, engine wear Check fuel quality, head gasket |
| Gubitak snage | Začepljen filter goriva Air intake restriction Injector issues | Zamijenite filter goriva Check air filter, intake Inspect/service injectors |
6. Tehničke specifikacije
The following table provides key technical specifications for the Yanmar Marine Diesel Engines covered by this manual. Note that specific details may vary slightly between models (3YM30, 3YM20, 2YM15).
| Specifikacija | Detalj |
|---|---|
| ASIN | 3954275082 |
| Izdavač | Europaischer Hochschulverlag Gmbh & Co. Kg |
| Datum objave | 29. maja 2012 |
| Jezik | German (Original Edition) |
| Dužina štampanja | 248 stranice |
| ISBN-10 | 9783954275083 |
| ISBN-13 | 978-3954275083 |
| Težina artikla | 15.8 unce |
| Dimenzije | 7.44 x 0.52 x 9.69 inča |
| Best Sellers Rank (Ships) | 5477 |
7. Garancija i podrška
This service manual focuses on technical procedures and does not contain specific warranty information for Yanmar marine diesel engines. For details regarding your engine's warranty coverage, please refer to the original purchase documentation or contact an authorized Yanmar dealer or service center.
For technical support, parts inquiries, or to locate an authorized service provider, please visit the official Yanmar Marine website or consult your local dealer. Always provide your engine's model and serial number when seeking support.
