ALIENTEK USB Tester C2 User Manual

1. Uvod

The ALIENTEK USB Tester C2 is a versatile digital voltmeter and charging power detector designed for comprehensive analysis of USB power delivery systems. It supports various fast charging protocols, measures voltage, current, power, and can even estimate battery capacity. This tool is ideal for phone repair, electrical DIY, and general power supply testing.

2. Sigurnosne informacije

WARNING: Automatic detection and manual triggering modes may trigger high voltage. Do not connect any electrical equipment that is not designed to handle such voltages; otherwise, we will not be responsible for any equipment damage caused!

• Držite uređaj suvim i dalje od vlage.
• Izbjegavajte izlaganje uređaja ekstremnim temperaturama.
• Ne pokušavajte rastaviti ili modificirati uređaj.

3. Sadržaj paketa

Standardni paket uključuje:

• 1 x ALIENTEK C2 USB Tester
• 1 x kartica s korisničkim priručnikom
• 1 x Metal Tin Case
• 1 x Zaštita ekrana od kaljenog stakla

4. Proizvod je gotovview

4.1. Interfaces and Buttons

• Type-C IN: Main input port for connecting to power sources.
• Type-C OUT: Output port for connecting to devices under test.
• Type-C PC-USB In: Port for connecting to a computer for software control and firmware updates.
• Dugme za povratak: Vraća se nazad kroz menije ili otkazuje operacije.
• Left / Up Key: Navigates left or up in menus, or adjusts values.
• Dugme za potvrdu: Selects options or confirms actions.
• Right / Down Key: Navigates right or down in menus, or adjusts values.

4.2. Displej

The C2 features a 1.54-inch IPS color screen with a resolution of 240x240 pixels, providing clear and detailed real-time data.

5. Podešavanje

To begin using your ALIENTEK USB Tester C2:

1. Connect the Type-C IN port of the tester to a USB power source (e.g., charger, power bank, PC USB port).
2. Connect the device you wish to test (e.g., phone, tablet) to the Type-C OUT port of the tester.
3. The tester will power on automatically and begin displaying real-time measurement data.

Note: When the monitoring voltage is below 3.6V, please connect the tester to a PC USB port for stable power supply.

6. Uputstvo za upotrebu

6.1. Osnovno mjerenje

The C2 tester displays essential measurement parameters in real-time, including:

• Voltage (Vbus)
• Current (Ibus)
• Snaga (W)
• D+ and D- voltages
• C1 and C2 voltages
• Temperatura
• Current Fast Charging Protocol Type

Note: Monitor mode requires the powered device to request protocols. Data obtained is for reference only.

6.2. Fast Charge Protocol Detection & Triggering

The C2 supports a wide range of fast charging protocols for both automatic detection and manual triggering.

• Automatsko otkrivanje: Perform a one-click scan to identify the fast charging protocols and detailed parameters supported by the connected power supply device.
• Manual Triggering: Manually select a specific fast charging protocol and its corresponding trigger voltage to conduct detailed testing of the power supply device's performance.

Supported protocols include: QC2.0, QC3.0, QC4+, QC5.0, PD2.0, PD3.0, PD3.1, PD3.2, Huawei FCP, Huawei SCP, Samsung AFC, UFCS Integrated Fast Charging, OP-PO-VOOC/SVOOC, MTK-PE, VIVO VFCP, and more.

6.3. Battery Capacity Estimation (Power Bank Mode)

The C2 can estimate the battery capacity of devices like mobile phones, tablets, and power banks.

Izračun: Capacity (Ah) = Wh / (3.7V × (0.8 - 1.0))

• Wh: The statistical value displayed on the tester screen.
• 3.7V: Voltage of a single lithium battery.
• 0.8 - 1.0: Represents the approximate charging efficiency, typically 80%-100%. This range may vary based on brand, model, and usage time.

The Power Bank Mode also eliminates low-load cutoffs and provides an intermittent dummy load for uninterrupted power testing.

6.4. Ripple Measurement

Measure the ripple quality of a power supply voltage sa asampling rate of up to 2M. The display shows the peak-to-peak value (Vp-p) to help assess stability.

6.5. Wire Resistance Measurement

The tester can measure the internal resistance of power supply cables using the pressure difference method, allowing for easy detection of cable quality.

6.6. Cable Detection (E-Marker Identify)

The C2 supports reading chip information from cables, such as E-Marker or Thunderbolt 5, to quickly understand the charging cable's performance and capabilities (e.g., data transfer speed, power delivery capacity).

6.7. Apple Charger SN Code Reading

This feature allows you to read the Serial Number (SN) code of Apple chargers, which can be used to verify their authenticity.

6.8. Offline Recording

The C2 can record data offline, storing up to 10,000 data points in 2 groups, with recording durations ranging from 8 minutes to 99 hours. This data can then be exported for playback and analysis.

6.9. PC Upper Computer Software

Connect the C2 tester to a computer via the Type-C PC-USB In interface to utilize the powerful PC software. This software enables:

• Control of the tester
• Waveform viewing
• Protocol triggering
• Snimanje podataka
• Nadogradnja firmvera

The software allows for 1kHz data acquisition, truly reproducing voltage and current details.

Note: USB PD Handshake Protocol Analysis is not supported by the C2 Lite model.

6.10. Video o proizvodu iznadview

7. Specifikacije

7.1. Opće specifikacije

• Model: C2
• Veličina ekrana: 1.54-inčni IPS
• Dimenzije proizvoda: 37.5 mm x 35 mm x 9.2 mm
• Neto težina: 17.5g
• Screen LCD Resolution: 240x240

7.2. Detailed Function Specifications

Note 1: When the monitoring voltage is below 3.6V, please connect to a PC USB port for power supply.

Note 2: The Bluetooth App will be released in the future. Currently, no App is available.

8. Održavanje

• čišćenje: Za čišćenje uređaja koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili aerosole.
• Skladištenje: Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Ažuriranja firmvera: The device supports online firmware updates to ensure optimal performance and access to new features. Connect to the PC software for the update process.

9. Otkrivanje problema

• Nema prikaza/Niska snaga: If the device does not power on or the display is dim, ensure it is connected to a stable power source. If the monitoring voltage is below 3.6V, connect it to a PC USB port for power.
• Netačna očitavanja: Ensure all connections are secure and clean. Calibrate the device if a calibration option is available in the menu or PC software. Remember that data in monitor mode is for reference only and requires the powered device to request protocols.
• Visok voltage Upozorenje: Be extremely cautious when using automatic detection and manual triggering modes, as they may trigger high voltage. Ensure connected equipment can handle the voltage kako bi se spriječila šteta.
• Bluetooth povezivanje: For C2 Std and C2 Pro models, note that the Bluetooth App is currently under development and not yet available.
• PC Software Connection Issues: Ensure the correct drivers are installed and the Type-C PC-USB In port is used for connection.

10. Savjeti za korisnike

• Razumjeti svoj model: The C2 Lite, C2 Std Bluetooth, and C2 Pro Bluetooth models have different capabilities, particularly regarding Bluetooth and advanced PC software features like PD Packet Capture. Refer to the specifications table to confirm your model's features.
• Redovno ažuriranje firmvera: Keep your device's firmware updated via the PC software to benefit from performance improvements and new functionalities.
• Sigurnost na prvom mjestu: Always be mindful of the voltage warnings, especially when using triggering functions, to prevent damage to the tester or connected devices.

11. Garancija i podrška

Za informacije o garanciji, tehničkoj podršci ili upite o servisiranju, obratite se direktno prodavcu ili proizvođaču. Sačuvajte račun kao dokaz o kupovini.