EPEVER Tracer2210AN G3 MPPT solarni regulator punjenja - uputstvo za upotrebu

1. Proizvod je gotovview

The EPEVER Tracer-AN G3 series represents a new generation of MPPT (Maximum Power Point Tracking) solar charge/discharge controllers. This controller is engineered to maximize the utilization of photovoltaic (PV) power and extend battery life through its adaptive 3-stage charging mode. It incorporates a constant voltage output function, ensuring broad compatibility with various battery types, including lithium batteries.

Designed for efficiency, the Tracer2210AN G3 boasts advanced MPPT technology with a tracking efficiency exceeding 99.5% and a maximum DC/DC conversion efficiency of 98%. Its low power consumption design minimizes standby power, making it suitable for applications such as RVs, residential solar systems, and outdoor monitoring setups. Under specific conditions, the PV system can directly power loads without requiring a battery.

Ključne karakteristike:

• Constant voltagizlazna funkcija.
• Maksimalna efikasnost DC/DC konverzije od 98%.
• Napredna MPPT tehnologija sa efikasnošću praćenja većom od 99.5%.
• Podržava više tipova baterija, uključujući baterije sa punim punjenjem, litijumske, gel, zatvorene i prilagođene postavke.
• Battery temperature compensation and stable self-activation function.
• Integrated LCD screen for convenient battery parameter setting and monitoring.
• Sveobuhvatni elektronski mehanizmi zaštite.
• Niska vlastita potrošnja, obično manja od 10mA.
• Višestruki načini rada s opterećenjem za fleksibilno upravljanje napajanjem.
• Parameter setting capabilities via PC software, mobile application, or an optional remote meter.
• RS485 communication interface with support for optional 4G or Wi-Fi modules.

2. Identifikacija komponente

Familiarize yourself with the various parts and connection points of your Tracer2210AN G3 controller:

• LCD ekran: Shows system status, parameters, and error codes.
• Montažne rupe (Φ5): Koristi se za pričvršćivanje kontrolera na površinu.
• Dugme SELECT: Koristi se za navigaciju kroz opcije menija.
• Dugme ENTER: Koristi se za potvrdu odabira ili unos postavki.
• Priključak za daljinski senzor temperature: Connects an external temperature sensor for accurate battery temperature compensation.
• Terminal solarnih panela: Connects to the positive and negative terminals of your solar array.
• Terminal za bateriju: Connects to the positive and negative terminals of your battery bank.
• Utovarni terminal: Connects to the positive and negative terminals of your DC loads.
• COM (RJ45 Communication Port): Used for connecting to a remote meter (e.g., MT52), PC software, or Wi-Fi/4G modules for monitoring and parameter setting.
• Wire Gauge Indication (12 AWG): Recommended wire size for terminals.

3. Instalacija i podešavanje

Pravilna instalacija je ključna za siguran i efikasan rad vašeg solarnog regulatora punjenja. Molimo vas da pažljivo slijedite ove korake:

1. Montaža: Choose a suitable location for the controller. It should be mounted vertically on a wall or other stable surface, ensuring adequate air circulation for cooling. Use the Φ5 mounting holes to secure the device.
2. Priprema žice: Ensure all wiring is correctly sized. The terminals are designed for a recommended wire size of 10 AWG (6mm²). Strip wires to the appropriate length before insertion.
3. Povezivanje baterije: Connect the battery to the controller's BATTERY TERMINAL first. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the system voltage (12V ili 24V).
4. Priključak solarnog panela: Connect the solar panel array to the controller's SOLAR PANEL TERMINAL. Again, observe correct polarity.
5. Učitavanje veze: Connect your DC loads to the controller's LOAD TERMINAL. Ensure correct polarity.
6. Remote Temperature Sensor (Optional): If using, connect the remote temperature sensor to its designated port. This improves charging accuracy by compensating for battery temperature fluctuations.
7. Communication Module (Optional): If using a remote meter (MT52), PC software, or Wi-Fi/4G module, connect it to the COM (RJ45) port.

Warning: Always connect the battery first and disconnect the solar panel last to prevent damage to the controller.

4. Uputstvo za upotrebu

Once installed, the Tracer2210AN G3 will begin charging the battery using its advanced MPPT algorithm. The LCD display provides real-time information about the system's status.

4.1. Adaptive 3-Stage Način punjenja

Kontroler koristi adaptivni 3-stage charging algorithm to optimize battery charging and prolong its lifespan:

• Skupno punjenje: Pruža maksimalnu struju za brzo punjenje baterije.
• Apsorpcijsko punjenje: Održava konstantnu jačinu zvukatage da biste potpuno napunili bateriju, sprječavajući prekomjerno punjenje.
• Punjenje plovkom: Smanjuje volumentagna niži nivo kako bi se baterija održala potpuno napunjenom, kompenzirajući samopražnjenje.

This process can be automatically managed or manually controlled to extend battery life, depending on your battery type and settings.

4.2. Režimi kontrole opterećenja

The controller offers several load control modes to manage the power supply to your DC loads:

• Priručnik: The load is controlled by a hand switch (or the SELECT/ENTER buttons on the controller).
• Od sumraka do zore s tajmerom: The controller automatically turns on the load at dusk and turns it off after a set duration.
• Tajmer: Allows you to set exact ON and OFF times for the load.
• Od prašine do zore: The load is automatically controlled by detecting the PV voltage, turning on at dusk and off at dawn.

Use the SELECT and ENTER buttons on the LCD display to navigate through menus and configure these settings. For detailed parameter adjustments, refer to the PC software, mobile app, or remote meter manual.

5. Održavanje

Regular maintenance ensures the longevity and optimal performance of your EPEVER Tracer2210AN G3 controller:

• čistoća: Keep the controller clean and free from dust and debris. Ensure ventilation openings are not obstructed.
• Veze: Periodically check all wire connections (solar panel, battery, load) to ensure they are tight and free from corrosion. Loose connections can cause overheating and performance issues.
• Uslovi okoline: Ensure the controller is operating within its specified temperature and humidity ranges. Avoid direct sunlight exposure if possible, as this can affect internal temperatures.
• Ažuriranja firmvera: Check the EPEVER website for any available firmware updates for your model. Updates can improve performance and add new features.

6. Rješavanje problema i zaštita

The Tracer2210AN G3 controller is equipped with extensive electronic protections to safeguard itself and your solar system components. If an issue occurs, the LCD display may show an error code or indicator.

6.1. Extensive Protections:

• Low Voltage Zaštita: Isključuje opterećenje kada je baterija praznatage drops below a set threshold to prevent deep discharge.
• Zaštita od prekomjerne temperature: Reduces charging/discharging current or shuts down if the controller's internal temperature exceeds safe limits.
• Zaštita od preopterećenja: Disconnects the load if the current drawn exceeds the controller's rated capacity.
• Zaštita od prekomjernog pražnjenja: Prevents the battery from being discharged too deeply, which can cause irreversible damage.
• Over Voltage Zaštita: Protects the battery from being charged at excessively high voltages.
• Zaštita od prekomjerne struje: Safeguards against excessive current flow in various parts of the system.
• Zaštita od kratkog spoja: Immediately disconnects in case of a short circuit in the load or battery terminals.
• Zaštita od inverzne struje: Prevents current from flowing from the battery back to the solar panels at night.

For specific troubleshooting steps related to error codes or persistent issues, please consult the comprehensive user manual provided by EPEVER or contact their technical support.

7. Tehničke specifikacije

Below are the detailed technical specifications for the EPEVER Tracer2210AN G3 MPPT Solar Charge Controller:

8. Savjeti za korisnike

• Izbor tipa baterije: Always ensure the correct battery type is selected in the controller settings to prevent damage and optimize charging. If using lithium batteries, verify compatibility and set parameters carefully.
• Dimenzioniranje sistema: Ensure your solar panel array and battery bank are appropriately sized for your controller's capacity (e.g., 20A for Tracer2210AN G3). Over-sizing PV input can damage the controller.
• Nadgledanje: Utilize the optional remote meter (MT52), PC software, or mobile app via the RJ45 port for comprehensive monitoring of your system's performance and health. This allows for proactive adjustments and troubleshooting.
• ventilacija: Mount the controller in a well-ventilated area. Although it has over-temperature protection, good airflow helps maintain optimal operating temperatures and extends component life.

9. Garancija i podrška

For information regarding the product warranty, terms, and conditions, please refer to the documentation included with your purchase or visit the official EPEVER website. If you encounter any issues or require technical assistance, please contact the seller or EPEVER customer support directly, providing your product model and serial number.