CONENTOOL MIG-200 4-in-1 Welding Machine User Manual

1. Uvod

The CONENTOOL MIG-200 is a versatile 4-in-1 digital portable welding machine designed for a wide range of welding applications. It integrates Synergy Gas MIG, Gasless MIG, ARC (MMA), and Lift TIG welding functions into a single compact unit. Featuring an IGBT DC Inverter for stable performance and a One-Knob Intelligent Control System for simplified operation, this machine is suitable for both professional and DIY use across various metals.

2. Sigurnosne informacije

Always prioritize safety when operating welding equipment. Read and understand all safety warnings and instructions before use.

• električna sigurnost: Ensure the power supply is 220V 50/60HZ and properly grounded. Avoid operating in wet conditions.
• Prekomjerna struja, Over-voltage, Over-heating Protection: The machine is equipped with automatic shutdown features to prevent damage from these conditions. If the machine shuts down, allow it to cool before resuming operation.
• Zaštita očiju i kože: Always wear a welding mask (included) with appropriate shade, protective gloves, and flame-resistant clothing to shield against arc rays, sparks, and hot metal.
• ventilacija: Ensure adequate ventilation to disperse welding fumes, which can be hazardous.
• Prevencija požara: Držite zapaljive materijale dalje od područja zavarivanja. Imajte aparat za gašenje požara pri ruci.
• Klasa zaštite: The machine has an IP21S protection rating, indicating protection against solid objects over 12mm and vertically falling water drops.
• Elektrostatička zaštita: Features a unique coating to prevent shock transfer.

3. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• 1 x CONENTOOL MIG-200 Welding Machine
• 1 x 1.35m Electrode Holder
• 1 x 1.35m Earth Clamp
• 1 x Hammer Brush
• 1 x Maska za zavarivanje
• 1 x 0.25kg 0.8mm Flux-cored Welding Wire
• 1 x MIG Torch
• 2 x 2.0/2.5mm Welding Rods
• 1 x Uputstvo za upotrebu

4. Proizvod je gotovview

Familiarize yourself with the main components of your welding machine.

4.1 Prednja ploča

• Digitalni panel: Displays voltage i trenutne postavke.
• Kontrolna dugmad: For adjusting voltage, current, and selecting welding modes (MIG, MMA, TIG).
• Otvori za odvođenje toplote: Essential for cooling the internal components.
• Pozitivan/Negativni izlaz: Connection points for welding cables.

4.2 Internal Wire Feeder

The machine features an internal wire feeder designed for optimal performance with 0.8mm flux cored wire, and compatible with 0.8-1.0mm welding wire.

4.3 Sistem hlađenja

An advanced cooling system with a large industrial radiator and heavy-duty dual-ball bearing fan ensures better performance, durability, and extended service life by maximizing airflow and reducing dust infiltration.

5. Podešavanje

5.1 Priključak za napajanje

• Ensure the welding machine is switched off.
• Connect the power cord to a 220V 50/60HZ power outlet. Ensure the outlet is properly grounded.

5.2 Spajanje pribora za zavarivanje

• Zemlja Clamp: Spojiti uzemljenje clamp cable to the appropriate terminal on the front panel (usually negative for MIG/MMA). Secure the clamp to the workpiece or welding table to ensure a good electrical connection.
• Electrode Holder (for MMA/ARC): Connect the electrode holder cable to the positive terminal for MMA welding. Insert the welding electrode into the holder.
• MIG Torch (for MIG Gas/Gasless): Connect the MIG torch cable to the designated MIG connection point.
• TIG gorionik (za kontaktni TIG): Connect the TIG torch to the appropriate terminal.

5.3 Loading Welding Wire (MIG Modes)

• Otvorite odjeljak za dodavač žice.
• Place the spool of welding wire (e.g., 0.8mm flux-cored wire) onto the spindle.
• Thread the wire through the guide tube and feed rollers, ensuring it is seated correctly.
• Zatvorite odjeljak za dodavač žice.
• For MIG Gas welding, connect the gas cylinder and regulator to the machine's gas inlet.

6. Uputstvo za upotrebu

The CONENTOOL MIG-200 offers four welding modes: MIG with gas, MIG without gas (Flux-cored), MMA (ARC), and Lift TIG. The One-Knob Intelligent Control System simplifies operation.

6.1 Odabir načina zavarivanja

• Uključite aparat za zavarivanje.
• Use the mode selection knob on the front panel to choose between MIG (Gas), MIG (Gasless), MMA, or Lift TIG.

6.2 Synergy One-Knob Intelligent Control (MIG Modes)

• In MIG modes, the One-Knob Intelligent Control System automatically adjusts welding current and wire feed speed based on your selection, ensuring optimal parameters for a flawless weld.
• Fine-tune the current adjustment knob to manage variable feed control for different material thicknesses (thin steel, stainless steel, thicker materials).

6.3 Parametri zavarivanja

The digital display will show the selected voltage and current. Adjust as needed for your specific welding task. The machine offers a current adjustment range of 30-200A for MIG and 20-200A for MMA/TIG.

The CONENTOOL MIG-200 is capable of welding a wide range of metals, including:

• Iron
• nerđajući čelik
• Pocinčani čelik
• Carbon Steel
• Bakar
• Raw steel, White steel, Sheet metal, Square pipe, Metal cage (as shown in product images)

7. Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vašeg aparata za zavarivanje.

• čišćenje: Periodically clean the exterior of the machine. The built-in cooling fan system helps reduce dust infiltration, but occasional cleaning of vents is recommended.
• Inspekcija kablova: Regularly inspect all welding cables, connections, and the MIG torch for wear, damage, or loose connections. Replace damaged components immediately.
• Dodavač žice: Mehanizam za dovod žice održavajte čistim i bez ostataka kako biste osigurali nesmetano dovod žice.
• Skladištenje: Aparat za zavarivanje čuvajte na suhom i čistom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

8. Otkrivanje problema

Ako naiđete na probleme, pogledajte sljedeće uobičajene savjete za rješavanje problema:

• Machine Shuts Down: The machine has built-in over-current, over-voltage, and over-heating protection. If it shuts down, allow it to cool down for several minutes before attempting to restart. Check for proper ventilation.
• Loš početak/stabilnost luka:
  • Ensure proper grounding of the workpiece.
  • Check welding parameters (current, voltage) are appropriate for the material and welding mode.
  • Inspect welding wire/electrode for proper size and condition.
  • Clean the contact tip of the MIG torch.
• No Wire Feed (MIG):
  • Check if the wire spool is correctly installed and not tangled.
  • Ensure the wire feed rollers are clean and tensioned correctly.
  • Verify the MIG torch trigger is functioning.

Za uporne probleme, kontaktirajte korisničku podršku.

9. Specifikacije

10. Savjeti za korisnike

• Počnite jednostavno: If new to welding, begin with simpler projects and practice on scrap metal to get a feel for the machine and different welding modes.
• Priprema materijala: Uvijek provjerite je li vaš radni komad čist i bez hrđe, boje ili ulja za najbolji kvalitet zavara.
• Izbor žice: While 0.8mm flux-cored wire is recommended, experiment with different wire types and diameters (within the 0.8-1.0mm range) to find what works best for your specific application and material.
• Gas for MIG: For cleaner welds and reduced spatter, use shielding gas when operating in MIG Gas mode. Mixed gas can also be used.
• Listen to the Machine: Pay attention to the sound of the arc. A consistent, steady sizzle usually indicates a good weld.

11. Garancija i podrška

Za informacije o garanciji, tehničkoj podršci ili upite o servisiranju, molimo Vas da se obratite kontakt informacijama koje je dostavio Vaš prodavač ili službeni predstavnik proizvođača. webSačuvajte račun kao dokaz o kupovini.