1. prekoview
The EPEVER IPower-Plus Series is a high-frequency pure sine wave inverter designed to convert 12/24/48VDC to 220/230V AC (or 110/120V AC) for various AC loads. It is engineered to international standards, ensuring high quality, reliability, and safety. This series is compatible with lithium-ion batteries and suitable for applications in RVs, boats, and residential settings requiring high-quality electrical power.
Ključne karakteristike:
- Čisti sinusni izlaz
- Električna izolacija ulaza i izlaza
- Digitalna dvostruka kontrola volumena u zatvorenoj petljitage i struja
- Input surge current suppression for lithium battery systems
- Faktor izlazne snage do 1
- Simple system wiring and 180 degrees rotating LCD
- Comprehensive Protection: Reverse polarity, Low-voltage, Over-voltage, Output Protection, Overload, Short circuit, Overheating
- Phone and PC remote control through RS485 port
- Extra external switch port
- Safety (EN/IEC62109) and EMC approved by international standards
2. Postavljanje i instalacija
Before installation, ensure all components are present and undamaged. Choose a well-ventilated, dry location away from direct sunlight and heat sources. Mount the inverter securely.
Dijagram ožičenja sistema 2.1
The following diagram illustrates a typical solar power system setup including the IPower-Plus inverter. Ensure all connections are secure and follow local electrical codes.
2.2 Connection Steps:
- Povezivanje baterije: Connect the inverter's DC input terminals to your battery bank. Ensure correct polarity (positive to positive, negative to negative). Use appropriate fuses or breakers between the battery and inverter.
- Priključak naizmjeničnog izlaza: Connect your AC loads to the inverter's AC output sockets or terminal block, depending on your model. Refer to the image below for different socket types.
- Solar Panel & Charge Controller (Optional): If integrating with a solar system, connect solar panels to a charge controller, and the charge controller to the battery bank. The inverter draws power from the battery.
- Remote Meter/Monitoring (Optional): Connect the remote meter or PC monitoring interface via the RS485 port for advanced control and data logging.
- External Switch (Optional): Connect an external switch to the designated port for remote ON/OFF control.
2.3 Početno uključivanje:
After all connections are made and verified, switch on the DC breaker/fuse from the battery bank. Then, press the power button on the inverter. The LCD display will illuminate, showing operational status.
3. Uputstvo za upotrebu
The IPower-Plus inverter features an intuitive LCD display and control buttons for easy operation and monitoring.
3.1 LCD Display and Buttons:
The LCD provides real-time information such as input voltage, output voltage, output power, and error codes. Use the buttons to navigate through menus and adjust settings as needed. The display can rotate 180 degrees for flexible viewing.
3.2 Uključivanje/isključivanje:
- Za uključivanje: Ensure DC input is connected. Press and hold the 'ON/OFF' button until the display lights up.
- Za isključivanje: Disconnect all AC loads. Press and hold the 'ON/OFF' button until the display turns off. Then, disconnect the DC input from the battery.
3.3 Remote Monitoring:
The inverter supports remote monitoring and control via an RS485 port. Connect to a PC or a compatible remote display unit to access detailed performance data and adjust parameters.
4. Održavanje
Redovno održavanje osigurava optimalne performanse i dugotrajnost vašeg invertera.
- čišćenje: Povremeno čistite vanjski dio i ventilacijske otvore invertera kako biste spriječili nakupljanje prašine, koja može ometati hlađenje. Koristite suhu, meku krpu.
- Veze: Annually check all electrical connections (DC input, AC output, ground) for tightness and corrosion. Tighten any loose connections.
- Okruženje: Osigurajte da okruženje u kojem se vrši instalacija ostane suho, dobro prozračeno i unutar navedenog raspona radne temperature.
- Zdravlje baterije: Monitor your battery bank's health, as it directly impacts inverter performance.
5. Otkrivanje problema
This section provides solutions for common issues. For complex problems, contact technical support.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Inverter se ne uključuje | No DC input power; Loose battery connection; Blown fuse/tripped breaker | Provjerite zapreminu baterijetage; Verify all DC connections; Replace fuse or reset breaker. |
| Nema izlaz naizmenične struje | Preopterećenje; Kratki spoj; Nizak napon baterijetage; Overheating | Reduce AC load; Check for short circuits in AC wiring; Charge batteries; Allow inverter to cool down. |
| Inverter beeps continuously | Niska zapremina baterijetage alarm; Overload alarm | Charge batteries or reduce load; Reduce AC load. |
| Abnormal noise from inverter | Loose components; Fan malfunction | Power off and check for loose parts (if safe); Contact support if fan is faulty. |
6. Tehničke specifikacije
Below are the detailed technical specifications for the EPEVER IPower-Plus Series inverters.
| Parametar | Vrijednost |
|---|---|
| Kontinuirana izlazna snaga | 2000W (for IP2000 models) |
| Nazivni ulazni voltage | 12VDC, 24VDC, or 48VDC (model dependent) |
| Output Voltage | 220VAC (±3%) / 230VAC (±2%) or 110VAC / 120VAC |
| Izlazna frekvencija | 50 / 60Hz ± 0.2% |
| Izlazni val | Čisti sinusni val |
| Enclosure | IP20 |
| Certifikacija | CE |
| Porijeklo | kontinentalna Kina |
7. Savjeti za korisnike
- For optimal performance, ensure your battery bank is adequately sized for your inverter's continuous output and peak surge requirements.
- When connecting to sensitive electronics, always verify the inverter's pure sine wave output to prevent damage.
- Utilize the remote monitoring features (RS485 port) to keep track of your system's performance and battery status, especially in off-grid or remote installations.
- Always disconnect the AC loads before powering off the inverter to prevent sudden power interruptions to your devices.
8. Garancija i podrška
Za informacije o garanciji, tehničkoj podršci ili upite o servisiranju, obratite se službenom EPEVER-u. webstranicu ili kontaktirajte ovlaštenog prodavača. Sačuvajte račun kao dokaz o kupovini za reklamacije.
