Priručnici+

Hantek DSO2D50

Hantek Digital Oscilloscope User Manual

Models: DSO2C20, DSO2C35, DSO2C50, DSO2D20, DSO2D35, DSO2D50

1. Uvod

This manual provides essential information for the safe and efficient operation of your Hantek Digital Oscilloscope. Please read it thoroughly before using the device and keep it for future reference. The Hantek Digital Oscilloscope series offers advanced features for waveform analysis, including high sampling rates, various bandwidths, and an intuitive user interface.

Front view of Hantek DSO2D50 Digital Oscilloscope with screen displaying waveforms and control panel.
Figure 1: Hantek Digital Oscilloscope (DSO2D50 model shown)
Hantek DSO2D50 Digital Oscilloscope in a laboratory setting with circuit boards.
Figure 2: Oscilloscope in a typical lab environment

2. Podešavanje

2.1. Sadržaj paketa

Verify that all items are present in your package. Contents may vary slightly depending on the specific model (DSO2C series vs. DSO2D series).

  • Hantek Digital Oscilloscope (selected model)
  • Certifikat o usklađenosti
  • Passive Probe-PP500B
  • Power Cable
  • Square USB Cable
  • Alligator Clip Cable (for DSO2C series)
  • Alligator Clip Cables (for DSO2D series)
Accessories included with DSO2C20/2C35/2C50 models: oscilloscope, certificate, alligator clip cable, passive probe-PP500B, power cable, square USB cable.
Figure 3: Accessories for DSO2C20/2C35/2C50 models
Accessories included with DSO2D20/2D35/2D50 models: oscilloscope, certificate, alligator clip cable, passive probe-PP500B, power cable, square USB cable.
Figure 4: Accessories for DSO2D20/2D35/2D50 models

2.2. Priključak za napajanje

  1. Ensure the oscilloscope is placed on a stable, flat surface with adequate ventilation.
  2. Connect the provided power cable to the power input port on the rear panel of the oscilloscope.
  3. Plug the other end of the power cable into a suitable AC power outlet (100-240V, 50/60Hz).
  4. Pritisnite dugme za napajanje na prednjoj ploči da biste uključili uređaj.
Rear panel of the Hantek Digital Oscilloscope showing power input, USB port, and warning labels.
Figure 5: Rear panel connections and warnings

2.3. Priključak sonde

Connect the passive probes to the CH1 and CH2 input BNC connectors on the front panel. Ensure a secure connection. For models with waveform generation (DSO2D series), the signal generator output is available via the EXT TRIG/GEN OUT port.

3. Operacija

The Hantek Digital Oscilloscope features a 7-inch capacitive multi-touch screen and a combination of physical buttons and knobs for intuitive control.

3.1. Osnovne kontrole

  • Vertikalne kontrole: Adjust vertical position and sensitivity (Volts/Div) for each channel.
  • Horizontalne kontrole: Adjust horizontal position and time base (Sec/Div).
  • Kontrole okidača: Set trigger level, mode, and type to stabilize waveforms.
  • Dugmad menija: Access various functions and settings.

3.2. Ključne karakteristike i funkcije

  • Impedance Switching: Support for 1MΩ/50Ω input impedance to ensure signal integrity.
  • Visoke performanse: U realnom vremenu sampling rate of 2GSa/s with a maximum bandwidth of up to 500MHz.
  • Arbitrary Waveform Generator (DSO2D Series Only): Capable of outputting 5 standard waveforms (Sine, Square, Ramp, Exp, Noise, DC) and supports custom arbitrary waveform output and burst output. Max frequency up to 25MHz.
  • Protocol Trigger and Decoding: Includes five standard serial protocol triggers and decoding for UART, LIN, CAN, SPI, IIC, facilitating serial bus data analysis.
  • automatska mjerenja: 32 automatic measurement and threshold measurement functions with statistical analysis.
  • Digital Voltmeter & Frequency Meter: Two sets of digital voltmeter functions and hardware frequency meter functions.
  • daljinski upravljač: Standard SCPI remote control instructions for building testing systems.
  • Upravljanje podacima: Save and export functions for settings, CSV data, images, reference waveforms, and waveforms.
  • Sampling metode: Četiri sampling methods available: Normal, Average, Peak Detection, and High-Precision.
  • Podrška za više jezika: Supports 14 operating languages.
  • Mjerenje kursora: Two cursor measurement modes: manual and tracking, with Math function support.
  • Vertical Measurement Range: 500uV-10V vertical measurement gear, 300VCAT II withstand voltage ulaz.
  • FFT ekran: FFT scale display for convenient result reading.
  • AUTO Measurement: Manual, single time, and one-click AUTO measurement for simple and fast waveform acquisition.
  • XY način rada: Supports dual window display for easy understanding of waveform phase changes.
Video 1: Kratak pregledview demonstrating the Hantek Digital Oscilloscope in operation, showcasing its display and controls.

4. Održavanje

4.1. Čišćenje

To clean the oscilloscope, use a soft, damp krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače, jer mogu oštetiti casing ili ekran. Prije čišćenja provjerite je li uređaj isključen i iskopčan iz struje.

4.2. Sigurnosna upozorenja

UPOZORENJE: Hazardous voltage inside. Do not remove the cover unless by specified personnel. Refer to the warning labels on the rear panel of the device (Figure 5).

4.3. Kalibracija

For optimal performance, periodic calibration by qualified personnel is recommended. Refer to the official Hantek support resources for information on calibration services.

5. Otkrivanje problema

If you encounter issues with your oscilloscope, try the following basic troubleshooting steps:

  • Nema napajanja: Ensure the power cable is securely connected and the power outlet is functional. Check the power button.
  • Nema prikaza signala: Verify that probes are correctly connected to the input channels and the signal source. Check probe settings (1X/10X) and vertical sensitivity.
  • Nestabilan talasni oblik: Adjust the trigger level and trigger mode. Ensure the time base is appropriate for the signal frequency.
  • Netačna očitanja: Perform a self-calibration if available in the utility menu. Check probe compensation.

For more complex issues, consult the comprehensive user manual (if a PDF version is available, it would be referenced here) or contact Hantek technical support.

6. Specifikacije

The Hantek Digital Oscilloscope series comes in various models with differing specifications. Please refer to the tables below for detailed information.

6.1. Poređenje modela

Model Comparison table for Hantek DSO2C/D series oscilloscopes, detailing channels, bandwidth, sampling rate, storage depth, signal source, and screen size.
Figure 6: Hantek DSO2C/D Series Model Comparison

6.2. Opće specifikacije

  • Naziv robne marke: Hantek
  • Pribor za „uradi sam“: Električni
  • Certifikacija: CE, FCC, RoHS, UL
  • Porijeklo: kontinentalna Kina
  • Veličina ekrana: 7 inča i više
  • Rezolucija ekrana: 800*480 piksela
  • Uključena baterija: br
  • IS baterija se može skinuti: br
  • Visoko zabrinjavajuća hemikalija: Nema
  • Težina paketa: 3.0 kg
  • Dimenzije paketa: 37 cm x 23 cm x 21 cm

6.3. Detailed Technical Specifications

Detailed specifications table for Hantek DSO2C/D series, covering Analog Bandwidth, Rising Time, Input/Output Channels, Waveform Generator, Sampling Mode, Memory Depth, Peak Detection, LCD Size, Display Resolution, Vertical System (Input Coupling, Impedance, Capacitance, Max Input Voltage, Vertical Resolution, Sensitivity Range, Offset Range, Dynamic Range, Bandwidth Limit, DC Gain Accuracy, DC Offset Accuracy, Channel-to-Channel Isolation, ESD Tolerance).
Figure 7: Detailed Technical Specifications (Part 1)
Continuation of detailed specifications table, covering Horizontal System (Range of Time Base, Time Base Accuracy, Time Base Delay Range, Time Interval, Horizontal Mode).
Figure 8: Detailed Technical Specifications (Part 2)
Continuation of detailed specifications table, covering Acquisition System (Max Sample Rate, Max Memory Depth, Peak Detection, Average Mode, High Resolution) and Arbitrary Waveform Generator (Sample Rate, Vertical Resolution, Max Frequency, Standard Waveform, Arb, Sine, Square, Ramp, Exp, Arb Frequency Range, Waveform Length, Frequency Accuracy/Resolution, Amplitude Output Range, DC Offset Accuracy/Resolution, Output Impedance).
Figure 9: Detailed Technical Specifications (Part 3)

7. Savjeti za korisnike

  • Always ensure probes are properly compensated for accurate measurements.
  • Utilize the AUTO measurement function for quick signal acquisition, then fine-tune settings manually.
  • Experiment with different sampling methods (Normal, Average, Peak Detection, High-Precision) to best suit the characteristics of the signal you are analyzing.
  • For complex serial data, leverage the Protocol Trigger and Decoding features to simplify analysis.
  • Regularly save important waveform data and settings to a USB drive using the export function.

8. Često postavljana pitanja (FAQ)

Q: What is the difference between DSO2C and DSO2D models?
A: DSO2D models include a built-in arbitrary waveform generator, while DSO2C models do not. Both series offer similar oscilloscope functionalities.
Q: Can I connect the oscilloscope to a computer?
A: Yes, the oscilloscope can be connected to a computer via the USB port using the provided square USB cable. This allows for data transfer and remote control using SCPI commands.
P: Kako da ažuriram firmver?
A: Firmware updates are typically provided by Hantek. Please visit the official Hantek website for the latest firmware and instructions on how to perform an update.
Q: Is the screen touch-sensitive?
A: Yes, the oscilloscope features a 7-inch capacitive multi-touch screen for intuitive interaction.

9. Garancija i podrška

Hantek products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official Hantek webSačuvajte dokaz o kupovini za slučaj reklamacije.

Povezani dokumenti - DSO2D50

Preview Hantek DSO2D20 serija digitalnih osciloskopa - uputstvo za upotrebu
Sveobuhvatno korisničko uputstvo za digitalne osciloskope serije Hantek DSO2D20, koje detaljno opisuje karakteristike, rad, rješavanje problema i specifikacije za preciznu analizu signala.
Preview Hantek DSO2D20 系列数字示波器数据手册
Hantek DSO2D20 系列数字示波器综合数据手册,详细介绍了产品特性、技术规格、订货信息和联系方式。涵盖型号 DSO2C20, DSO2C20, DSO2C20, DSO2C20, DSO2C35 DSO2D35, 和 DSO2D50.
Preview Hantek DPO7000 Series Digital Oscilloscope Datasheet
Comprehensive datasheet for the Hantek DPO7000 Series Digital Oscilloscope, detailing features, technical specifications, ordering information, and optional upgrades for these versatile 8-in-1 instruments.
Preview Hantek PP350B/PP500B Oscilloscope Probe User Guide and Specifications
Comprehensive user guide and technical specifications for Hantek PP350B and PP500B 10X oscilloscope probes. Includes details on frequency compensation, probe characteristics, and included accessories for accurate measurements.
Preview Hantek DSO2D20 数字示波器用户手册 - 操作与功能指南
获取 Hantek DSO2D20系列数字示波器的官方用户手册.技术、触发模式、系统配置及故障排除,是用户掌握和高效使用该示波噀
Preview Hantek DSO2D20 Series Digital Oscilloscope Quick Guide
A concise and SEO-optimized HTML guide for the Hantek DSO2D20 Series Digital Oscilloscope, covering safety, product overview, preparation, and remote control.