SONOFF Orb-ZBRBS Fusion Series Zigbee Smart Roller Shutter Wall Switch MINI-ZBRBS-E User Manual

1. Uvod

This document provides comprehensive instructions for the installation, operation, and maintenance of the SONOFF Orb-ZBRBS Fusion Series Zigbee Smart Roller Shutter Wall Switch, model MINI-ZBRBS-E. This device is designed to upgrade regular electric curtains to smart curtains, offering advanced control and integration capabilities.

The Orb-ZBRBS supports a maximum 1A load motor and, when paired with a Zigbee gateway, enables remote control via an app, scheduling, and smart interconnection features. It also functions as a Zigbee signal relay, enhancing the stability and coverage of your Zigbee network.

Za detaljnu PDF verziju ovog priručnika, molimo pogledajte Uputstvo za upotrebu (PDF).

2. Proizvod je gotovview i karakteristike

The SONOFF Orb-ZBRBS is a smart roller shutter wall switch designed for modern smart homes. It offers precise control over roller blinds and curtains, integrating seamlessly with various smart home ecosystems.

Ključne karakteristike:

• Precise Percentage Kontrola: Adjust roller blinds to pinpoint percentages (e.g., 30% for soft morning glow, 70% to filter harsh sunlight).
• Prilagođeni rasporedi: Set timers to automate curtain opening and closing based on your daily routine.
• Pametne scene: Create automated scenarios, such as closing curtains when a door sensor detects entry for privacy.
• upravljanje glasom: Kompatibilno s Alexom i Google Homeom za rad bez upotrebe ruku.
• Zigbee Mesh Network: Functions as a Zigbee signal repeater to strengthen and extend your network coverage.
• Matter Enabled: Seamless integration with the Matter ecosystem via a Zigbee Bridge Ultra and Matter hub on the same LAN.
• Third-party Platform Integration: Easily integrates with open-source platforms like Home Assistant via Zigbee2MQTT or ZHA.
• Low-Latency & Reliable: Ensures faster response speeds and reliable performance even when internet is down.

3. Specifikacije

4. Podešavanje

4.1. Šta se nalazi u kutiji

The product package typically includes the SONOFF Orb-ZBRBS Smart Roller Shutter Wall Switch (MINI-ZBRBS-E) and a user manual. Additional accessories like mounting screws or specific wiring tools may be required and are not always included.

4.2. Sigurnosne informacije

WARNING: Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!

To ensure the safety of your electrical installation, it's essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 1A has been installed before the MINI-ZBRBS-E.

4.3. Zahtjevi za motor

The motors supported by the device for control are general 4-wire AC motors and 5-wire AC motors (with neutral wire, motor forward line, motor reverse line, and ground line) equipped with built-in forward/reverse rotation limiter.

4.4. Mounting Box Compatibility

The switch is compatible with both 86-Type Mounting Boxes and European Round Mounting Boxes (φ60mm).

4.5. Isključivanje

Before any installation or wiring, ensure the main power supply is turned off at the circuit breaker to prevent electric shock.

4.6. Upute za ožičenje

Make sure all wires are connected correctly. Refer to the diagram and table below for proper wiring.

4.7. Uključite napajanje

After wiring, turn on the main power supply. The device will enter pairing mode by default during the first use, and the LED indicator will flash slowly.

4.8. Roller Shutter Direction Test

Nakon pritiska prekidača, provjerite da li se roleta pomiče u ispravnom smjeru. Ako ne, isključite napajanje, zamijenite žice Lout1 i Lout2, a zatim ponovo testirajte.

5. Uputstvo za upotrebu

5.1. Preuzmite aplikaciju eWeLink

Download the "eWeLink" App from the Google Play Store or Apple App Store.

5.2. Add SONOFF Zigbee Gateway & Device Pairing

The Orb-ZBRBS requires a compatible SONOFF Zigbee hub (e.g., ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost) for smart control.

1. Uđite u način uparivanja: Press any direction button on the device continuously 6 times within 6 seconds to enter pairing mode. Alternatively, press and hold the device button for 5 seconds. The blue LED indicator will slow flash.
2. Skenirajte QR kod: In the eWeLink App, select "Add Device" and scan the QR code on the device.
3. Select Zigbee Hub: Choose your added Zigbee Hub in the app.
4. Pronađite uređaj: Wait for the hub to find the device. Once found, the LED indicator will keep on, indicating a normal connection.

Note: The device will exit pairing mode if no operation is performed within 3 minutes. If the device exits pairing mode, long press the button for 5 seconds until the signal light flashes slowly and release to re-enter pairing mode.

5.3. Kalibracija kretanja

Korištenje postotakatage control requires travel calibration. Select one of the following two calibration options:

Method 1: App-based Calibration

Users can use the "Travel Calibration" pop-up window in the eWeLink App, or open the "Initial Settings" on the device settings page and then perform "Automatic Calibration" or "Manual Calibration" according to the text instructions in the App.

Method 2: Device Button Calibration

1. Automatska kalibracija: Pritisnite i držite dugme uređaja duže od 10 sekundi dok LED indikator ne uđe u režim disanja. Uređaj će zatim automatski kontrolisati motor radi kalibracije.
2. Ručna kalibracija: Press and hold the device button for more than 10 seconds until the LED indicator enters breathing mode. Then, briefly press the device button to enter "Manual Calibration" mode.
3. Ručno potpuno otvorite zavjese, a zatim kratko pritisnite dugme uređaja dok LED indikator ne zatreperi tri puta.
4. Wait for the device to automatically close the curtains, then briefly press the device button again until the LED indicator flashes three times. This completes the "Manual Calibration".

Kontrolirajte uređaj putem aplikacije i provjerite potpuno otvorene ili potpuno zatvorene položaje. Ako postoji bilo kakva neskladnost, možete ga ponovo kalibrirati.

5.4. Upravljanje glasom

Integrate your Orb-ZBRBS with voice assistants like Amazon Alexa or Google Home for convenient voice commands. For example, say "Hi, Siri, Open the curtain to 60%." (Requires smart speakers with corresponding third-party voice platforms).

5.5. Smart Scenes and Scheduling

Automate your roller blinds by setting custom schedules or creating smart scenes. For instance, open curtains at 8:00 AM to soak up the sun and close them at 10:00 PM for a restful night. You can also link the switch with other smart devices, like a door sensor, to automatically adjust curtains for privacy.

5.6. Zigbee Mesh Network Functionality

The Orb-ZBRBS can work as a Zigbee signal repeater, transmitting the Zigbee signal among your Zigbee devices to strengthen your mesh network and extend its range throughout your home.

5.7. Integracija s platformama trećih strana

Easily integrate your device into open-source platforms via Zigbee2MQTT or ZHA, creating a smart home solution that works seamlessly with devices from various manufacturers. It also supports Apple Home via Matter Bridge.

6. Održavanje

6.1. Čišćenje

Obrišite uređaj mekom, suhom krpom. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.

6.2. Ažuriranja firmvera

Ensure your eWeLink App and Zigbee hub firmware are up to date to benefit from the latest features and improvements. The Orb-ZBRBS supports OTA (Over-The-Air) updates.

6.3. Maximum Continuous Operation Time

The maximum one-way allowable continuous operation time for the motor in this device is 2 minutes. Please pause the operation before the curtain reaches its limit position to avoid damaging the motor.

7. Otkrivanje problema

7.1. Device Not Pairing

• Ensure the device is within range of your Zigbee hub.
• Check if the LED indicator is slow flashing, indicating pairing mode. If not, re-enter pairing mode by long pressing the device button for 5 seconds.
• Provjerite je li vaš Zigbee hub uključen i ispravno funkcionira.
• Ensure the eWeLink App is updated to the latest version.

7.2. Incorrect Roller Shutter Direction

If the roller blind moves in the wrong direction after installation, turn off the power, swap the Lout1 and Lout2 wires, and then test again.

7.3. Percentage Control Issues

If percentage control is not working accurately, perform a travel calibration (either via the app or device buttons) as described in section 5.3.

7.4. Zigbee Network Instability

Ensure the Orb-ZBRBS is strategically placed to act as a repeater, especially if you have many Zigbee end devices or a large home. Consider adding more Zigbee routers if the network is still unstable.

8. Savjeti za korisnike

• For optimal performance, ensure your Zigbee hub is centrally located within your home.
• When setting up smart scenes, consider using light sensors or presence detectors for more dynamic and energy-efficient curtain automation.
• Regularly check for firmware updates for both the switch and your Zigbee hub to ensure compatibility and access to new features.
• If integrating with Home Assistant, ensure your Zigbee dongle (e.g., ZBDongle-P, ZBDongle-E) is properly configured for ZHA or Zigbee2MQTT.

9. Factory Reset

To perform a factory reset, which can resolve persistent issues or prepare the device for a new setup, follow these steps:

• Pritisnite i držite dugme uređaja 5 sekundi.
• Alternatively, delete the device from the eWeLink App.
• Through switch operation: Press any direction button continuously 6 times within 6 seconds.

10. Compliance and Disposal

10.1. EU izjava o sukladnosti

Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type MINI-ZBRBS-E is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/

10.2. Informacije o odlaganju i recikliranju WEEE

All products bearing the WEEE symbol (waste electrical and electronic equipment) should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

10.3. CE Frequency

Raspon radne frekvencije EU: Zigbee: 2405-2480MHz

EU izlazna snaga: Zigbee≤10dBm

11. Garancija i podrška

For warranty information and technical support, please contact SONOFF Official Store directly or visit their official website.

• Proizvođač: Shenzhen Sonoff Technologies Co., Ltd.
• Adresa: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, Kina
• Poštanski broj: 518000
• Webstranica: sonoff.tech
• e-mail usluge: support@itead.cc