ANENG 683 Smart Multimetar Uputstvo za upotrebu

1. Uvod

The ANENG 683 is a 3 5/6 digital multimeter designed for stable performance and reliable quality. It features an LCD display with an analog bar, providing clear readings. This meter simplifies operation by automatically identifying and measuring AC/DC voltage and resistance, eliminating the need for manual dial selection. It is capable of measuring DC voltage, AC voltage (sine RMS), DC current, AC current (sine RMS), resistance, capacitance, live-line indication, duty cycle, diode on/off test, and includes features like symbol unit display, data hold, and automatic power off. Equipped with a high-capacity rechargeable battery, the ANENG 683 is an ideal tool for laboratories, factories, radio enthusiasts, and household use.

2. Sigurnosne informacije

Please read and understand all safety information before operating this multimeter. Failure to follow these instructions may result in electric shock, fire, or damage to the meter.

• Uvijek se uvjerite da je multimetar u ispravnoj funkciji i rasponu prije mjerenja.
• Do not exceed the maximum input values for any range. The maximum voltage allowed between the measuring terminal and ground is 1000V DC or 750V AC.
• Budite oprezni kada radite sa voltagiznad 30V AC RMS, 42V peak ili 60V DC, jer predstavljaju opasnost od strujnog udara.
• Inspect test leads for damaged insulation or exposed metal before use. Replace damaged leads immediately.
• Ne koristite mjerač ako izgleda oštećeno ili ako je kućište otvoreno.
• Be extremely careful when making current measurements. Always connect the meter in series with the load. Never connect the meter in parallel with a voltage source when measuring current, as this will blow the fuse and can damage the instrument.
• Discharge capacitors before measuring capacitance.
• Ne koristite mjerač u okruženjima s eksplozivnim plinom, parom ili prašinom.
• Prije promjene funkcija ili raspona, uklonite mjerne kablove iz strujnog kola.
• Zamijenite bateriju kada se pojavi indikator slabe baterije kako biste osigurali tačna očitavanja.

3. Proizvod je gotovview

3.1 Ključne karakteristike

• Intelligent Control Screen with VA color reverse display
• Smart Touch Screen for intuitive operation
• USB Rechargeable Lithium Battery (3.7V/2800mA)
• 6000 Counts Display
• Automatic Range and Manual Range selection
• Full Range Overload Protection
• Non-Contact Voltage (NCV) Induction
• Live Zero Line Recognition
• Flashlight Lighting for dark environments
• Data Retention (HOLD function)
• Automatsko isključivanje
• Indikacija slabe baterije
• Durable ABS/Silicone material with silicone sheath

3.2 Komponente

Paket obično uključuje:

• ANENG 683 Smart Multimeter Unit
• Test Leads (Watch Pen Cable)
• Temperaturna linija (termoelement)
• USB kabl za punjenje
• Korisnički priručnik (ovaj dokument)
• Torba za pohranu
• Packaging Box

3.3 Dimenzije

The approximate dimensions of the multimeter are 150mm x 75mm x 24mm (Length x Width x Height).

4. Podešavanje

4.1 Početno punjenje

The ANENG 683 multimeter is powered by a built-in rechargeable lithium battery. Before first use, or if the low battery indicator is displayed, charge the device using the provided USB charging cable. Connect the USB cable to the multimeter's USB port and plug the other end into a standard USB power adapter (not included) or a computer USB port.

4.2 Spajanje mjernih kabela

To prepare for measurements, connect the test leads to the multimeter:

• Umetnite crni mjerni kabel u ulazni priključak "COM" (Common).
• Za većinu volumenatage, resistance, capacitance, frequency, diode, and temperature measurements, insert the red test lead into the "VΩmA" input jack.
• For current measurements (up to 10A), insert the red test lead into the "10A" input jack. For milliampere/mikroampere current measurements, insert the red test lead into the "mA A" input jack.

5. Uputstvo za upotrebu

The ANENG 683 features an intelligent control screen and smart touch technology, allowing for automatic recognition of measurement types in many cases. The device supports both manual and auto-ranging modes.

5.1 AC/DC Voltage Measurement

In AUTO mode, the multimeter automatically recognizes AC or DC voltage. Connect the test leads in parallel to the circuit or component you wish to measure. For example, to measure household AC voltage (approx. 220V) or DC voltage from a regulator (approx. 30V).

5.2 Mjerenje otpora

In AUTO mode, the multimeter automatically recognizes resistance. Ensure the circuit is de-energized before measuring resistance. Touch the stylus (test leads) to both sides of the resistor or component to measure its resistance.

5.3 Diodno mjerenje

Switch the multimeter to the diode test function. Touch the positive and negative poles of the diode with the test leads to check its functionality.

5.4 Mjerenje kapaciteta

Before measuring capacitance, it is crucial to discharge the capacitor. This can be done by short-circuiting its two ends, for example, using a screwdriver with an insulated handle. Once discharged, switch the multimeter to the capacitance function and connect the test leads to the capacitor terminals.

5.5 Mjerenje AC/DC struje

IMPORTANT: Current measurements must always be made in series with the circuit. Never connect the multimeter in parallel with a voltage source when measuring current, as this will damage the instrument and blow the fuse.

To measure current, ensure the red test lead is plugged into the appropriate current input jack (e.g., "10A" or "mA A"). Break the circuit and insert the multimeter in series so that the current flows through the meter.

5.6 Live Zero Line Recognition

Switch the multimeter to the "Live" (zero-fire line) gear. Insert the red test lead into the socket hole. If it's the live wire (firewire), the flashlight will flash red, and an alarm sound will be emitted. If it's the neutral wire (zero line), there will be no red flashing or alarm sound.

5.7 NCV (Beskontaktni volumentage) Indukcija

NCV funkcija omogućava beskontaktno detektovanje AC voltažetage. Use the NCV sensor located on the top of the multimeter. The closer the sensor is to a power source, the more rapid the alarm will be, and the flashlight will flash red, indicating the presence of voltage.

5.8 Buzzer (Continuity Test)

The buzzer function provides an audible indication of continuity. When continuity is detected (e.g., a fuse is unobstructed), the multimeter will beep, and the flashlight may flash red.

5.9 Mjerenje temperature

To measure temperature, switch the multimeter to the °C/°F temperature gear. Connect the provided temperature line (thermocouple) to the appropriate input jacks and place the probe in contact with the object whose temperature you wish to measure.

5.10 Osvjetljenje baterijskom lampom

The built-in flashlight assists in illuminating measurement areas in dark environments, making night work or dimly lit spaces easier to navigate.

6. Specifikacije

The following tables detail the measurement ranges, resolutions, and accuracies for the ANENG 683 Smart Multimeter. Note that "d" or "digits" refers to the least significant digit of the display.

6.1 Opšte specifikacije

• Display: 6000 Counts LCD monitor with analog bar
• Operating Mode: Manual Range / Auto Range
• Battery Type: 3.7V/2800mA rechargeable lithium battery
• Fuse Protection: uA/mA
• Maximum Voltage (between terminal and ground): 1000V DC or 750V AC
• Operating Temperature: 0 - 40 ℃
• Material: ABS/Silicone
• Težina: Približno 217g
• Dimenzije: 150mm x 75mm x 24mm

6.2 Specifikacije mjerenja

6.3 Dodatne funkcije

Napomena: Gore navedeni parametri su samo za referencu i stvarna mjerenja specifične opreme će biti mjerodavna.

7. Održavanje

7.1 Čišćenje

To maintain the accuracy and longevity of your multimeter, keep it clean. Wipe the case with a damp cloth and a mild detergent. Do not use abrasives or solvents. Ensure the device is powered off and test leads are disconnected before cleaning.

7.2 Punjenje baterije

The multimeter uses a rechargeable lithium battery. When the low battery indicator appears on the display, connect the device to a USB power source using the provided charging cable. Regular charging helps maintain battery health and ensures the meter is ready for use.

7.3 Skladištenje

When not in use for extended periods, store the multimeter in its protective storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect test leads before storing.

8. Otkrivanje problema

If you encounter issues with your ANENG 683 multimeter, refer to the following common troubleshooting steps:

• Nema prikaza/Uključivanje: Ensure the battery is charged. Connect the multimeter to a USB power source to charge it.
• Netačna očitanja:
  • Check if the test leads are properly connected to the correct input jacks for the desired measurement.
  • Verify that the multimeter is set to the appropriate function and range (if not in AUTO mode).
  • Ensure the circuit or component being measured is properly connected and de-energized if required (e.g., for resistance or capacitance).
  • Provjerite ima li oštećenih mjernih kabela.
• Fuse Blown (for current measurements): If the multimeter does not measure current, the fuse might be blown due to incorrect connection (e.g., connecting in parallel to a voltage source). Fuse replacement should only be performed by qualified personnel.
• No NCV/Live Line Detection: Ensure the function is correctly selected and the sensor area is clear.

If the problem persists after following these steps, please contact customer support.

9. Savjeti za korisnike

Iako od strane re nisu bili dostupni nikakvi konkretni savjeti za korisnikeviews or Q&A, here are some general recommendations for using your multimeter effectively:

• Uvijek počnite s najvišim rasponom pri mjerenju nepoznate zapremine.tage ili struje kako bi se spriječilo preopterećenje brojila.
• For capacitance measurements, remember to fully discharge capacitors before connecting the multimeter to avoid damage to the meter or inaccurate readings.
• Utilize the flashlight feature in dimly lit areas to improve visibility and safety during measurements.
• The automatic recognition feature is convenient, but understanding manual ranges can be beneficial for specific diagnostic tasks.

10. Garancija i podrška

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official ANENG webSačuvajte račun kao dokaz o kupovini.