1. Proizvod je gotovview
The TDA-08 series is a versatile rail-type weighing force transmitter and weight sensor signal amplifier designed for industrial applications. It integrates force measurement, weighing, display, and control functions into a single compact unit. This device is suitable for various weighing and force measurement systems, providing accurate signal amplification and processing.
Ključne karakteristike
- Integrates force measurement, weighing, display, and control functions.
- Internal integrated switching power supply, operating voltagRaspon: od 10 V do 30 V.
- Equipped with an analog filtering function for stable readings.
- Automatic error diagnosis for easy identification and resolution of issues.
- Features automatic zero tracking.
- Supports automatic zeroing upon power-up.
- Configurable zero range and filter intensity.
2. Sigurnosne informacije
Please read and understand all safety instructions before installation, operation, or maintenance of the TDA-08 series device. Failure to follow these instructions may result in injury or damage to the equipment.
- Osigurajte napajanje voltage is within the specified range (10V-30V DC).
- All wiring should be performed by qualified personnel and in accordance with local electrical codes.
- Isključite napajanje prije bilo kakvih priključaka ili održavanja.
- Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
- Do not open the device enclosure unless specifically instructed to do so by a qualified technician.
3. Instalacija i podešavanje
3.1 Raspakivanje
Carefully remove the TDA-08 unit from its packaging. Inspect the device for any signs of physical damage. Retain the packaging for future transport or storage.
3.2 Montaža
The TDA-08 series is designed for rail mounting. Securely attach the device to a standard DIN rail in a suitable enclosure, ensuring adequate ventilation and protection from environmental factors.
3.3 Ožičenje
Refer to the terminal block labels on your specific TDA-08 model (TDA-08A, TDA-08B, or TDA-08C) for correct connections. Typical connections include:
- Ulazna snaga: Connect 10V-30V DC power to the designated power terminals (e.g., +V, -V, GND).
- Load Cell/Sensor Input: Connect the load cell or weight sensor to the input terminals (e.g., E+, E-, S+, S-). Ensure correct polarity.
- Analogni izlaz: Connect to external control systems or displays via analog output terminals (e.g., OUT, AO).
- Digitalni ulazi/izlazi: If applicable, connect control signals to digital input (e.g., IN) and output (e.g., OUT1, OUT2, OUT3) terminals.
Always consult the detailed wiring diagram specific to your TDA-08 model and application. If unsure, seek assistance from a qualified electrician or system integrator.
3.4 Početno napajanje
After all connections are securely made, apply power to the device. The display should illuminate, and the device may perform an automatic zeroing sequence. Observe the display for any error messages or unexpected behavior.
4. Operacija
The TDA-08 series features a digital display and control buttons for easy operation. Specific button functions may vary slightly between models (TDA-08A, TDA-08B, TDA-08C).
4.1 Prikaz prekoview
The digital display shows the current measured value (e.g., weight, force). Indicators (e.g., NET, PWAK, Kg, g, N, KN) provide additional status information.
4.2 Basic Weighing/Measurement
Once powered on and calibrated, the device will continuously display the measured value from the connected sensor. Place the item to be weighed or apply force to the sensor.
4.3 Nuliranje
To set the current reading to zero (e.g., to tare a container), press the NULA button. The device supports automatic zero tracking and power-up zeroing.
4.4 Kalibracija
Calibration is crucial for accurate measurements. To enter calibration mode, typically press and hold the SET/CALI button. Follow the on-screen prompts to perform a multi-point calibration using known weights or force standards. Refer to the specific model's detailed instructions for the exact calibration procedure.
4.5 Podešavanje parametara
The device allows configuration of various parameters such as zero range, filter intensity, and output settings. Access the settings menu by pressing the SET/CALI button (or similar, depending on model). Use the navigation buttons (e.g., UP/DOWN arrows, SWITCH, OFTEN) to adjust values and confirm selections.
5. Održavanje
The TDA-08 series is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity and performance:
- čišćenje: Uređaj održavajte čistim i bez prašine i ostataka. Za čišćenje koristite meku, suhu krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
- inspekcija: Povremeno provjeravajte sve spojeve ožičenja na čvrstoću i znakove habanja ili korozije.
- Okruženje: Osigurajte da radno okruženje ostane unutar specificiranih raspona temperature i vlažnosti.
- Rekalibracija: Recalibrate the device periodically or if you suspect measurement inaccuracies.
6. Otkrivanje problema
The TDA-08 series includes automatic error diagnosis to help identify and resolve common issues. If you encounter a problem, refer to the table below:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Ekran je prazan | Nema napajanja ili neispravan volumentage. | Provjerite priključke napajanja i jačinu zvukatage (10V-30V jednosmjerne struje). |
| Netačna očitavanja | Needs calibration; sensor issue; environmental interference. | Perform calibration. Check sensor wiring and integrity. Ensure stable operating environment. |
| Display shows "OVER" or "UNDER" | Sensor overload/underload; incorrect range setting. | Ensure load is within sensor capacity. Check and adjust range settings if configurable. |
| Nema odgovora sa dugmadi | Device frozen; button malfunction. | Power cycle the device. If problem persists, contact support. |
| Nestabilna očitavanja | Electrical noise; mechanical vibration; filter intensity too low. | Check for sources of electrical interference. Reduce vibrations. Increase filter intensity in settings. |
7. Specifikacije
| Feature | Specifikacija |
|---|---|
| Model | TDA-08 Series (TDA-08A, TDA-08B, TDA-08C) |
| Fixed Type | Magnetic Fastener (for mounting) |
| Koristi | Window (likely refers to display window) |
| Operating Voltage | 10V ~ 30V DC |
| Filtering Function | Analogno filtriranje |
| Dijagnoza greške | Automatski |
| Zero Tracking | Automatski |
| Power-up Zeroing | Automatski |
| Podesivi parametri | Zero range, filter intensity, etc. |
| Porijeklo | kontinentalna Kina |
Dimenzije i težina
- Device Dimensions (L x H x D): 88mm x 53mm x 59mm (including rail mount)
- Dimenzije pakovanja (D x Š x V): 23 cm x 11 cm x 7 cm
- Težina paketa: 0.8 kg
8. Savjeti za korisnike
Dok specifični savjeti za korisnike od reviews or Q&A are not available, here are some general recommendations for optimal use:
- For critical applications, always verify calibration regularly.
- If experiencing signal noise, ensure proper grounding of the system and use shielded cables for sensor connections.
- Keep a record of your calibration dates and any parameter changes.
9. Garancija i podrška
For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model and serial number (if applicable) ready when contacting support.
