1. Uvod
Hvala na kupoviniasing the YUER LED 150W Beam Spot Moving Head Light. This professional stage and DJ lighting fixture is designed to create dynamic and vibrant light shows with its powerful LED source, multiple patterns, colors, and prism effects. This manual provides essential information for safe and effective setup, operation, and maintenance of your device.
2. Sigurnosne informacije
- Uvijek priključite uređaj na uzemljenu utičnicu.
- Uvjerite se da napajanje odgovara navedenoj zapreminitage (AC100-240V, 50-60HZ).
- Ne otvarajte kućište; unutra nema dijelova koje korisnik može sam servisirati. Za sve servisne radove obratite se kvalifikovanom osoblju.
- Izbjegavajte direktno izlaganje očiju izvoru svjetlosti.
- Osigurajte odgovarajuću ventilaciju oko uređaja kako biste spriječili pregrijavanje.
- Mount the fixture securely to prevent accidental falls.
3. Podešavanje
3.1 Raspakivanje
Carefully unpack the fixture and inspect it for any damage during transit. Retain the packaging materials for future use or transport.
3.2 Montaža
The YUER LED 150W Beam Spot Moving Head Light is designed for self-contained installation. Ensure the mounting surface or truss is capable of supporting the weight of the fixture. Use appropriate clamps and safety cables (not included) for overhead installations.
3.3 Priključak za napajanje
Connect the fixture to a suitable power source (AC100-240V, 50-60HZ) using the appropriate plug type (EU, US, AU, UK) for your region. The power input is located at the rear of the unit.
3.4 DMX priključak (opciono)
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the fixture. If linking multiple fixtures, connect from the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the last fixture in the chain has a DMX terminator installed.
4. Operacija
4.1 Kontrolna tabla
The fixture features an LCD display and control buttons (MENU, UP, DOWN, ENTER) for navigating settings and selecting operating modes.
4.2 Načini rada
- Samohodni način rada: The fixture runs through pre-programmed light sequences automatically.
- Način kontrole zvuka: The light effects react to ambient sound or music detected by the built-in microphone.
- DMX512 način rada: Allows for precise control over all functions (pan, tilt, color, patterns, prism, etc.) using an external DMX controller. Refer to the DMX channel chart (typically provided with the product or available from the manufacturer) for detailed control parameters.
- Master-Slave Connection: Link multiple fixtures together. One fixture acts as the master, controlling all other slave units to synchronize effects.
4.3 Svjetlosni efekti
The YUER LED 150W Beam Spot Moving Head Light offers a variety of effects:
- obrasci: Features 8 distinct patterns to project.
- boje: Offers 7 colors plus white for a wide spectrum of lighting.
- prizma: Includes an 18-prism effect to multiply the beam.
- Rainbow Effect: Creates dynamic color transitions.
5. Održavanje
5.1 Čišćenje
Regularly clean the exterior of the fixture with a soft, dry cloth. For the lens, use a soft cloth and a non-abrasive cleaner specifically designed for optical surfaces. Ensure the fixture is powered off and disconnected from the mains before cleaning.
5.2 Inspekcija
Periodically inspect all mounting hardware, cables, and connections for signs of wear or damage. Replace any damaged components immediately. Do not attempt to repair internal components yourself.
6. Otkrivanje problema
- Nema napajanja: Check the power cable connection, ensure the power outlet is active, and verify the correct voltage.
- Nema izlaza svjetlosti: Confirm the fixture is powered on and not in a 'blackout' DMX state. Check for any error messages on the LCD display.
- Bez DMX kontrole: Verify DMX cable connections, DMX address settings on the fixture, and ensure the DMX controller is functioning correctly. Check for a DMX terminator on the last fixture.
- Erratic Movement/Effects: This could indicate a DMX signal issue or an internal fault. Try resetting the fixture or checking DMX connections.
Ako problemi i dalje postoje, kontaktirajte korisničku podršku za pomoć.
7. Specifikacije
| Feature | Specifikacija |
|---|---|
| Brand Name | Yuer |
| Broj modela | 150W LED pokretna glava |
| Vrsta stavke | StagEfekat osvetljenja |
| Prilika | Stručnjak Stage i DJ |
| Izvor napajanja | AC |
| Nominal Voltage | 110-220V |
| Voltage | 90-240V |
| Snaga (W) | 200W |
| Jesu li sijalice uključene | Da |
| Luminous Flux | 249-2000 |
| Metoda instalacije | samostalan |
| Certifikacija | CE |
| Stil | DMX Stage Svjetlost |
| Porijeklo | kontinentalna Kina |
| Visoko zabrinjavajuća hemikalija | Nema |
7.1 Dimenzije i težina paketa
- Dužina: 35 cm
- Širina: 35 cm
- Visina: 25 cm
- Težina: 9.0 kg
8. Jamstvo i podrška
Yuer is committed to providing quality products and customer satisfaction. For any technical support or warranty inquiries, please refer to the seller's official support channels. The product comes with a service commitment that includes:
- Fast delivery support.
- Security and privacy of personal details.
- Return and refund policy for eligible issues.
For detailed information regarding specific terms and conditions, please consult the official product page or contact the seller directly.
9. Savjeti za korisnike
- When using DMX control, ensure each fixture has a unique address to avoid conflicts.
- Experiment with different patterns and colors to create diverse atmospheres for your events.
- For optimal beam visibility, consider using a fog or haze machine.
