1. Uvod
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your new BENQ Projector Color Wheel. This component is crucial for the proper display of colors in compatible BENQ projector models. Please read this manual thoroughly before attempting any installation or maintenance to ensure safe and correct usage.
2. Postavljanje i instalacija
The color wheel is a delicate component and should be handled with care. Installation typically involves opening the projector casing and replacing the existing color wheel. It is recommended that this procedure be performed by a qualified technician.
2.1 Sigurnosne mjere
- Always disconnect the projector from the power source before beginning any installation or maintenance.
- Allow the projector to cool down completely before opening the casing.
- Wear anti-static gloves to prevent damage to sensitive electronic components.
- Avoid touching the reflective surfaces of the color wheel directly.
- Držite male dijelove podalje od djece.
2.2 Koraci instalacije (Opći vodič)
- Access the Projector Interior: Carefully open the projector casing according to your specific projector model's service manual. This usually involves removing screws and detaching panels.
- Locate the Old Color Wheel: Identify the existing color wheel assembly. It will typically be a circular component with colored segments, connected to a small motor and a flexible ribbon cable.
- Disconnect the Old Color Wheel: Gently disconnect the flexible ribbon cable from the projector's main board. Be careful not to bend or damage the connector.
- Remove the Old Color Wheel: Unscrew or unclip the old color wheel assembly from its mounting bracket.
- Install the New Color Wheel: Position the new BENQ color wheel into the mounting bracket. Ensure it is seated correctly and securely fastened.
Slika 1: Vrh view of the color wheel with segments and ribbon cable.
Slika 2: Pod uglom view showing the motor and ribbon cable connection.
- Spojite trakasti kabel: Carefully connect the flexible ribbon cable of the new color wheel to the corresponding port on the projector's main board. Ensure it is fully inserted and locked into place.
Slika 3: Bočna strana view of the color wheel and its flexible ribbon cable.
Figure 4: Color wheel with extended ribbon cable.
- Reassemble the Projector: Carefully close the projector casing, ensuring all screws are tightened and panels are securely reattached.
- Test funkcionalnost: Reconnect the projector to power and test its operation. Check for proper color display and absence of unusual noises.
3. Operacija
The color wheel is an internal component that operates automatically within the projector. Once correctly installed, it requires no direct user interaction. Its function is to rapidly spin, sequentially filtering light from the lamp into red, green, and blue components (and sometimes clear or other colors) before it reaches the DLP chip. This rapid sequencing creates the full-color image perceived by the viewer.
Ensure your projector's settings are configured for optimal color performance after installation. Refer to your projector's main user manual for specific color calibration and display mode adjustments.
4. Održavanje
The color wheel itself is a sealed unit and generally does not require user maintenance. However, maintaining a clean projector environment is crucial for its longevity.
- Prevencija prašine: Keep the projector in a clean, dust-free environment. Dust accumulation inside the projector can affect the color wheel's performance and lifespan.
- Čišćenje vazdušnog filtera: Regularly clean or replace the projector's air filters as per your projector's user manual. This prevents dust from entering the optical engine and settling on components like the color wheel.
- Profesionalno čišćenje: If you notice dust or debris inside the projector's optical path, or if the color wheel appears dirty, consult a professional technician for internal cleaning. Attempting to clean the color wheel directly without proper tools and knowledge can cause irreparable damage.
5. Otkrivanje problema
If you experience issues after installing the new color wheel, consider the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema slike ili iskrivljena slika | Color wheel ribbon cable not properly connected. | Ensure the flexible ribbon cable is securely and correctly seated in its connector. |
| Unusual grinding or high-pitched noise from projector | Color wheel motor issue or obstruction. | Verify the color wheel is properly mounted and nothing is obstructing its rotation. If the noise persists, the motor may be faulty. |
| Color distortion, rainbow effect, or flickering colors | Color wheel not spinning correctly or damaged segments. | Check for any visible damage to the color wheel segments. Ensure the motor is functioning. If the issue persists, the color wheel may need replacement. |
| Projector not turning on or shutting down immediately | Safety mechanism triggered due to faulty component or incorrect installation. | Double-check all connections and ensure no components were damaged during installation. Consult a professional if the problem continues. |
If these steps do not resolve the issue, please contact customer support or a qualified service technician.
6. Specifikacije
| Feature | Detalj |
|---|---|
| Vrsta proizvoda | Projector Color Wheel |
| Kompatibilnost | BENQ W1070, W5700, W1120, W1090, i0399, HT1095, I707, CL1024, W3000, HD2324 (and other compatible models) |
| Color Segments | Typically Red, Green, Blue, Clear (specific configuration may vary by model) |
| Veza | Flexible Ribbon Cable |
| Porijeklo | kontinentalna Kina |
| Visoko zabrinuta hemikalija | Nema |
7. Savjeti za korisnike
- Rastavljanje dokumenta: When opening your projector, take photos or notes of each step and component placement. This will greatly assist in reassembly.
- Čistoća je ključna: Even small dust particles can cause visible artifacts on the projected image. Ensure your workspace is as clean as possible during installation.
- Nježno rukovanje: The ribbon cable and the color wheel itself are fragile. Apply minimal force when connecting or disconnecting components.
- Provjerite kompatibilnost: Always double-check the exact model number of your projector against the compatible models listed for the color wheel to ensure a perfect fit and function.
8. Garancija i podrška
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt and any product identification numbers handy when contacting support.
Informacije o prodavcu:
- Store Name: Shop1104902402 Store
- Seller Admin Sequence: 6002678686
- Contact Email: jingingbinglan@163.com
- WhatsApp: +8619522312730
Please note that this product is a replacement part, and its warranty may be subject to the terms and conditions of the original projector manufacturer or the seller of this specific component.
