1. Uvod
The SINOTIMER CN101S is a reliable 1-second interval digital LCD timer switch designed for automatic control of various electrical equipment. This programmable time relay allows you to set precise ON/OFF schedules over a 7-day weekly cycle, with a minimum interval of 1 second. It is ideal for applications such as controlling streetlights, neon signs, lamps, bojleri, klima uređaji, reklamni panoi, električni štednjaci, pojačivači, prskalice, punioci flaširanja, predgrijači, poljoprivredni objekti i oprema za emitiranje.
Equipped with a built-in battery, the CN101S retains its programmed settings even during power failures, ensuring continuous operation. Its design features low power consumption, a high-accuracy CMOS chip, and strong anti-jamming capabilities, making it simple and easy to set up and use.
2. Ključne karakteristike
- Programabilna kontrola: 24 hours / 7 days a week programming with 1-second interval.
- Veliki kapacitet: Rated for 3500 Watts / 16 Amps.
- Sigurnosna kopija memorije: 1.2V built-in battery saves programs during power outages.
- tačnost: Auto time error correction of +/- 30 seconds weekly.
- Ulaz/Izlaz Voltage: 200-250VAC, 50/60Hz.
- Konfiguracija izlaza: 1 Normally Open (NO) contact.
- Materijal: Durable ABS + electronic components.
- Kompaktan dizajn: Easy to integrate into various setups.
3. Tehničke specifikacije
| Parametar | Vrijednost |
|---|---|
| Model | CN101S |
| Ulazni voltage | 200-250VAC, 50/60Hz |
| Output Voltage | 200-250VAC |
| Maksimalna struja opterećenja | 16 Amps |
| Maksimalna snaga opterećenja | 3500 Watts |
| Programabilnost | 24 hours / 7 days weekly |
| Minimalni interval | 1 sekunda |
| Korekcija vremenske greške | +/- 30 seconds weekly (Auto) |
| Backup memorije | 1.2V Built-in Battery |
| Materijal | ABS + elektronske komponente |
| Dimenzije (D x Š x V) | 7.0 cm x 7.0 cm x 4.0 cm |
4. Podešavanje i ožičenje
Važna sigurnosna napomena: Installation should be performed by a qualified electrician or knowledgeable individual. Ensure power is disconnected before attempting any wiring.
4.1 Dijagram ožičenja
Refer to the diagram below for proper wiring connections. The timer features 5 terminals on the back for input power and load connection.
- Terminal 1 (LINE INPUT): Connect the Live (L) wire of your 200-250VAC, 50/60Hz power supply.
- Terminal 2 (NEUT ULAZ): Connect the Neutral (N) wire of your 200-250VAC, 50/60Hz power supply.
- Terminal 3 (NEUT POWER OUTPUT): Connect the Neutral (N) wire of your electrical load to this terminal. This provides the neutral path for the load.
- Terminal 4 (LOAD POWER OUTPUT): Connect the Live (L) wire of your electrical load to this terminal. This is the switched Live output (Normally Open contact) that the timer will control.
- Terminal 5 (LOAD POWER OUTPUT): This terminal is also labeled "LOAD". Given the specification of "1NO" (one Normally Open contact), Terminal 4 is the primary switched output. Terminal 5 may be an alternative connection point for the switched load or for specific dual-load configurations not typically used with a single NO relay. For standard operation, use Terminal 4 for the switched live to your load.
Uvjerite se da su svi priključci sigurni i izolirani.
4.2 Initial Power-Up and Display Overview
Once wired, apply power. The LCD display will illuminate. If the display is blank or dim, allow the internal battery to charge for a few minutes. The built-in 1.2V battery ensures that your programmed settings are retained even if the main power is interrupted.
Prednja ploča uključuje:
- LCD ekran: Shows current time, day, ON/OFF status, and programming modes.
- Dugme RUČNO: For manual override of the timer's output.
- Dugme P (Program): Enters and navigates programming mode.
- Dugme D+ (Dan): Adjusts the day of the week or selects days in program mode.
- Dugme H+ (Sat): Podešava sat.
- Dugme M+ (minuta): Podešava minute.
- Clock Icon Button: Used in conjunction with D+, H+, M+ to set the current time.
- Dugme R (Resetovanje): Resets the timer to factory defaults (clears all programs and current time).
5. Uputstvo za upotrebu
5.1 Podešavanje trenutnog vremena i dana
- Pritisnite i držite Ikona sata dugme.
- Dok držite Ikona sata dugme, pritisnite D+ da postavite trenutni dan u sedmici.
- Dok držite Ikona sata dugme, pritisnite H+ da podesite trenutni sat.
- Dok držite Ikona sata dugme, pritisnite M+ za postavljanje trenutne minute.
- Otpustite Ikona sata dugme. Trenutno vrijeme i dan su sada podešeni.
5.2 Programiranje rasporeda UKLJUČENO/ISKLJUČENO
The CN101S allows for multiple ON/OFF programs. Follow these steps to set your desired schedules:
- Pritisnite P (Program) Pritisnite dugme jednom da biste ušli u režim podešavanja programa. Na ekranu će se prikazati "1 ON".
- Pritisnite D+ to select the day(s) for this program. You can choose individual days, weekdays, weekends, or all 7 days.
- Pritisnite H+ da biste podesili željeni sat uključivanja.
- Pritisnite M+ da biste podesili željeni minut UKLJUČIVANJA.
- Pritisnite P (Program) ponovo pritisnite dugme. Na ekranu će se prikazati "1 ISKLJUČENO".
- Pritisnite D+ to select the day(s) for this OFF program (usually the same as the ON program).
- Pritisnite H+ to set the desired OFF hour.
- Pritisnite M+ to set the desired OFF minute.
- Da biste podesili dodatne programe, pritisnite P (Program) again to cycle through "2 ON", "2 OFF", and so on. Repeat steps 2-8 for each program.
- Nakon što su svi programi postavljeni, pritisnite dugme Ikona sata dugme za izlazak iz režima programiranja i povratak na prikaz trenutnog vremena.
The timer supports 1-second intervals, meaning you can set very precise ON/OFF durations. If a program is not needed, simply skip setting its ON/OFF times, or ensure the ON and OFF times are identical to effectively disable it.
5.3 Ručno prebacivanje
The MANUAL button allows you to temporarily override the programmed schedule. Pressing this button will cycle through different modes:
- ON: Izlaz je stalno UKLJUČEN, ignorišući programe.
- AUTOMATSKI: The timer operates according to the programmed schedules.
- ISKLJUČENO: Izlaz je kontinuirano ISKLJUČEN, ignorišući programe.
Select "AUTO" for the timer to follow your programmed schedules.
5.4 Resetovanje tajmera
To clear all programs and reset the current time to factory defaults, press the small R (Resetovanje) button using a pointed object (like a pen tip). After resetting, you will need to set the current time and reprogram all schedules.
6. Održavanje
- čišćenje: Obrišite vanjski dio tajmera mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
- baterija: The CN101S has a built-in 1.2V battery for memory backup. This battery is not user-replaceable. If the timer consistently loses settings after power outages, the battery may need servicing by a professional.
- Okruženje: Ensure the timer is installed in a dry environment, away from direct sunlight, extreme temperatures, and corrosive substances.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Ekran je prazan ili taman. | No power supply or internal battery discharged. | Check power connections. Allow timer to charge for a few minutes after initial power-up. |
| Tajmer se ne uključuje/isključuje kako je programirano. | Incorrect program settings, manual override active, or incorrect current time. |
|
| Programs are lost after a power outage. | Internal backup battery is depleted or faulty. | The battery is not user-replaceable. If this issue persists, consider professional servicing or replacement. |
| Dugmad ne reagiraju. | Privremeni softverski kvar ili fizičko oštećenje. | Try pressing the R (Reset) button. If unresponsive, disconnect power for a few minutes and reconnect. If problem persists, contact support. |
8. Savjeti za korisnike
- For critical applications, always double-check your programmed schedules after setting them.
- Consider using the manual override function for temporary changes without altering your main programs.
- When setting programs, ensure the ON time is before the OFF time within a 24-hour cycle, or that the OFF time is on the subsequent day if the cycle spans midnight.
9. Garancija i podrška
For technical assistance, warranty information, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
