1. Uvod
The CADDXFPV Eclipse Thermal Camera is an advanced thermal imaging solution designed for various applications, including FPV (First Person View) drones. This manual provides essential information for the proper setup, operation, and maintenance of your thermal camera system. Please read this manual thoroughly before using the product to ensure safe and optimal performance.
2. Sigurnosne informacije
- Do not expose the camera to extreme temperatures, direct sunlight for prolonged periods, or corrosive environments.
- Izbjegavajte ispuštanje ili izlaganje uređaja jakim udarima.
- Osigurajte tačan voltage is supplied to the device as specified in the 'Specifications' section. Incorrect voltage can cause permanent damage.
- Držite uređaj dalje od vode i vlage.
- Do not attempt to disassemble or modify the camera system. This will void the warranty and may cause damage.
- Koristite samo originalnu ili odobrenu dodatnu opremu.
3. Components Overview
The CADDXFPV Eclipse Thermal Camera system typically includes the following main components:
- Thermal Camera Module: The primary unit responsible for capturing thermal images.
- Main Processing Unit: Handles video processing, power management, and interfaces.
- Antene: For video transmission (if applicable to your specific variant).
- Priključni kablovi: For power, video, and data transmission between modules.
4. Specifikacije
The following specifications apply to the Eclipse Camera-640HD model. Specifications may vary slightly for other variants (384, 256).
| Feature | Detalj |
|---|---|
| Tip detektora | Neohlađeni vanadijev oksid |
| Rezolucija | 256x192@12µm |
| Opseg talasnih dužina | 8 ~ 14 μm |
| NETD | ≤40mk @ F1 25°C |
| LENS | F1.0/4mm/50°(H)*37.2°(V)*62.3°(D) |
| Frame Rate | 50 fps |
| Potrošnja energije | <1.5w |
| Izlaz | PAL |
| Snabdijevanje voltage | 5v~20v |
| Objektiv | 4mm |
| Radna temperatura | -20°C~60°C |
| Analogno sučelje | CVBS |
| HD interfejs | MIPI-CSI/Walksnail Avatar |
| Latencija | Prosječna latencija 20ms |
| Kvalitet slike | Poboljšanje slike pomoću umjetne inteligencije |
| Materijal | nerđajući čelik |
| Controllable Distance | 200~800 (units not specified, typically meters for FPV) |
5. Podešavanje i ožičenje
Carefully follow the wiring diagrams below to connect your CADDXFPV Eclipse Thermal Camera system. Incorrect wiring can damage the device and connected components.
5.1 UART veza
This connection is typically used for data communication, such as OSD (On-Screen Display) control or flight controller integration.
| Pin | Funkcija |
|---|---|
| TX2 | UART Transmit 2 |
| RX2 | UART Receive 2 |
| GND | Ground |
| 5V0 | Izlazna snaga 5V |
5.2 Main Power and Video Output
This connection provides power to the unit and outputs the video signal. Ensure the power supply is within the specified voltage opseg (9V-26V).
| Pin | Funkcija |
|---|---|
| CVBS | Analogni video izlaz |
| Power 9V-26V | Main Power Input (9V to 26V) |
| GND | Ground |
| OSD | Kontrola prikaza na ekranu |
| V-BUS | Voltage Bus (Power Output) |
Napomena: Always double-check your wiring before applying power to prevent damage to the camera or other electronic components.
6. Uputstvo za upotrebu
6.1 Uključivanje
Nakon ispravnog ožičenja, priključite napajanje unutar navedene jačinetage range (5V-20V for the camera module, 9V-26V for the main unit). The system should initialize, and thermal video output will be available via the CVBS (Analog) or MIPI-CSI/Walksnail Avatar (HD) interfaces.
6.2 Video izlaz
The camera outputs a PAL video signal. Ensure your display device or video receiver is compatible with PAL format. The HD interface supports MIPI-CSI and Walksnail Avatar systems for high-definition thermal video.
6.3 Termovizijsko snimanje
The camera utilizes an uncooled vanadium oxide detector to capture thermal radiation. The AI Image Enhancement feature helps improve the clarity and detail of the thermal feed. The latency is approximately 20ms, providing a responsive experience for FPV applications.
7. Održavanje
- čišćenje: Gently clean the camera lens and housing with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- Skladištenje: Čuvajte kameru na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
- inspekcija: Redovno pregledavajte kablove i konektore da li ima znakova habanja ili oštećenja.
8. Otkrivanje problema
- Nema napajanja: Check all power connections and ensure the supply voltage is within the specified range (9V-26V for the main unit). Verify that the power source is functioning correctly.
- Nema video izlaza: Confirm that the video output cable (CVBS or HD interface) is securely connected to your display device or video receiver. Ensure your display is set to the correct input and supports PAL format for analog output.
- Loš kvalitet slike: Check for any obstructions on the camera lens. Ensure the camera is operating within its specified temperature range (-20°C to 60°C).
- Povremeni signal: Inspect antenna connections for tightness and ensure they are not damaged. Check for potential interference sources in your operating environment.
9. Savjeti za korisnike
- For optimal thermal performance, allow the camera a few moments to stabilize after powering on, especially in varying ambient temperatures.
- Experiment with different mounting positions on your drone or platform to find the best field of view and minimize vibrations.
- Keep the lens clean to ensure clear thermal imagery. Dust or smudges can significantly degrade performance.
- When using the HD interface, ensure your digital FPV system (e.g., Walksnail Avatar) is updated to the latest firmware for best compatibility and features.
10. Garancija i podrška
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, please reach out to the CADDXFPV customer service channels.
11. Kontakt informacije
For further assistance or inquiries, please contact CADDXFPV customer support through their official websajt ili ovlašćeni distributeri.
