1. Uvod
This manual provides essential information for the installation, operation, and maintenance of your new Original 36V 400W Motor for the Segway F2 Plus Electric Scooter. This rear wheel hub motor, complete with a 60/70-6.5 vacuum tire, is designed to restore or enhance the performance of your scooter. Please read this manual thoroughly before proceeding with any installation or use to ensure safe and correct handling.
2. Sigurnosne informacije
- Always disconnect the scooter's power source (battery) before performing any installation or maintenance.
- Wear appropriate personal protective equipment, including gloves and eye protection, during installation.
- Osigurajte da su svi električni priključci sigurni i pravilno izolirani kako biste spriječili kratki spoj.
- Ako niste sigurni u vezi s bilo kojim korakom, obratite se kvalificiranom tehničaru.
- Držite djecu i kućne ljubimce podalje od radnog područja.
3. Specifikacije
| Feature | Detalj |
|---|---|
| Voltage | 36V |
| Nazivna snaga | 400W |
| Kompatibilnost | Segway F2 Plus Electric Scooter |
| Tip gume | Vacuum Tire (Tubeless) |
| Veličina gume | 60/70-6.5 |
| Materijal | High-quality metal alloy (wheel hub), durable rubber (tire) |
| Ukupni prečnik | Pribl. 250mm |
| Ukupna širina | Pribl. 150mm |
| Porijeklo | kontinentalna Kina |
Detaljno View of Motor Specifications:
Image: Close-up showing '36V 400W' and other identifiers on the motor hub.
Tire Size Detail:
Image: Detail of the tire sidewall indicating size '60/70-6.5' and 'TUBELESS'.
Dimensional Overview:
Image: Diagram illustrating the approximate 250mm diameter and 150mm width of the motor and tire assembly.
4. Sadržaj paketa
Vaš paket treba da sadrži sljedeće artikle:
- 1 x F2 Plus 36V 400W Motor (with integrated 60/70-6.5 vacuum tire)
Please inspect the contents upon receipt to ensure all parts are present and undamaged.
5. Postavljanje i instalacija
This motor is a direct replacement for the rear wheel hub motor on the Segway F2 Plus Electric Scooter. Installation typically involves removing the existing rear wheel and motor assembly and installing the new unit. Professional installation is recommended if you are not familiar with electric scooter repair.
Gotovoview of the Motor Assembly:
Slika: Front view of the complete motor and tire assembly.
Placement on Scooter:
Image: Illustrates the motor's position as the rear wheel of the Segway F2 Plus scooter.
Ožičenje:
Image: Detail of the electrical wiring harness and connectors for the motor.
Koraci instalacije (Opći vodič):
- Pripremite skuter: Turn off the scooter and disconnect the battery to prevent accidental power-on. Place the scooter on a stable stand or surface to access the rear wheel.
- Uklonite stari točak: Carefully disconnect the existing motor's electrical wires. Note their positions and colors for re-connection. Unscrew and remove the axle nuts and any other fasteners holding the rear wheel assembly in place. Remove the old wheel.
- Instalirajte novi motor: Position the new 36V 400W motor assembly into the scooter's rear fork. Ensure it is correctly aligned.
- Osigurajte osovinu: Re-attach the axle nuts and tighten them securely. Do not overtighten.
- Povežite ožičenje: Carefully connect the new motor's electrical wires to the scooter's wiring harness. Match the wire colors and connector types (as shown in the wiring connections image). Ensure all connections are firm and properly insulated.
- Završne provjere: Double-check all connections and ensure no wires are pinched or exposed. Reconnect the scooter battery.
6. Uputstvo za upotrebu
After successful installation, perform a functional test:
- Uključeno: Turn on your Segway F2 Plus scooter.
- Početni test: With the rear wheel off the ground, gently engage the throttle to ensure the motor spins smoothly and quietly.
- Test kočnica: Test the rear brake to ensure it engages properly and stops the wheel.
- Test na putu: Once satisfied with the initial tests, perform a short test ride in a safe, open area at low speed. Gradually increase speed and test braking and acceleration.
The motor is designed to provide robust performance. Operate your scooter according to the original manufacturer's guidelines.
7. Održavanje
- Redovni pregled: Periodically check the motor and tire for any signs of wear, damage, or loose connections.
- Pritisak u gumama: Maintain the recommended tire pressure for the 60/70-6.5 vacuum tire as specified by Segway for optimal performance and longevity.
- čišćenje: Keep the motor and wheel clean from dirt, dust, and debris. Use a damp cloth for cleaning; avoid high-pressure water jets directly on the motor.
- Ožičenje: Ensure all wiring remains intact and free from cuts or abrasions.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Motor se ne okreće | Loose wiring connection, battery low, controller issue | Check all wiring connections. Ensure battery is charged. Consult scooter's main manual for controller diagnostics. |
| Neobična buka iz motora | Foreign object, loose components, internal motor issue | Inspect for debris. Check for loose nuts/bolts. If noise persists, professional inspection is recommended. |
| Smanjena snaga/brzina | Low battery, tire pressure, motor overload | Charge battery fully. Check and adjust tire pressure. Avoid overloading the scooter. |
| Tire losing air | Puncture, valve stem issue | Inspect tire for punctures. Check valve stem for leaks. Repair or replace tire if necessary. |
9. Savjeti za korisnike
- For optimal performance and safety, always ensure your scooter's battery is fully charged before long rides.
- Regularly check tire pressure, especially before each ride, to ensure a smooth and efficient journey.
- Store your scooter in a dry, cool place to prolong the life of the motor and battery.
10. Garancija i podrška
For any warranty claims or technical support, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase. Ensure you follow all installation and maintenance guidelines to avoid voiding any potential warranty.
