STARTRC GPS Bluetooth daljinski upravljač - uputstvo za upotrebu

Uvod

This manual provides detailed instructions for the STARTRC GPS Bluetooth Remote Controller. This device is designed to enhance your experience with DJI Osmo Action series cameras, offering remote control capabilities, multi-camera synchronization, and precise GPS data recording.

Molimo vas da pažljivo pročitate ovaj priručnik prije upotrebe proizvoda kako biste osigurali pravilan rad i maksimalno iskoristili njegove funkcije.

Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• Bluetooth Remote Controller (1)
• Remen za zapešće (1)
• Bicycle Strap (1)
• USB-C kabl za punjenje (1)
• Uputstvo za upotrebu (1)

Slika: Sadržaj pakovanja proizvoda.

Setup

1. Punjenje daljinskog upravljača

Before first use, fully charge the remote controller. Connect the supplied USB-C charging cable to the remote controller's Type-C port and a power source. A full charge takes approximately 2 hours.

Image: Remote controller connected to a USB-C charging cable.

2. Uparivanje s vašom kamerom

The remote controller connects to your DJI Osmo Action camera via Bluetooth. Follow these steps for initial pairing:

1. Turn on your DJI Action camera.
2. Uključite daljinski upravljač.
3. For the first connection, the camera will require pairing. A verification code will appear on the camera screen.
4. Ensure the verification code on the remote controller matches the one displayed on the camera.
5. Press "Confirm" on the camera screen to complete the connection.
6. Once paired, the Bluetooth remote control will display a blue light, indicating a successful connection. A green light indicates pairing is complete and the device is ready for normal use.

Image: Step-by-step visual guide for pairing the remote controller with a DJI Action camera.

Note: To use the wake-up camera feature, you need to enable relevant settings on the camera. Swipe down from the top of the touchscreen home page to enter the system control center, select System Settings > Bluetooth Remote Control, and enable the wake-up camera feature. In multi-camera control mode, the wake-up camera function of the remote control will not be effective.

Advanced Pairing Options:

• Promjena načina upravljanja: To switch between one-remote-control-multiple-cameras or single-camera control, and enter pairing mode, press and hold the Dugme Shutter i Dugme za uparivanje istovremeno 4 sekunde.
• Clearing Connection Information: To clear all current camera connection information and enter pairing mode, press and hold the Dugme za brzo prebacivanje (Power Button) and Dugme za uparivanje istovremeno 4 sekunde.

3. Opcije montaže

The remote controller comes with two types of straps for versatile mounting:

• Remen za zapešće: For close-range sports wear. Pass the long strap through the back of the remote and secure it around your wrist.
• Bicycle Strap: For fixation on bicycles, motorcycles, or backpacks. Insert the short strap into the back of the remote and stick it onto the strap to secure it to a handlebar or similar fixture.

Slika: pramples of how to mount the remote controller using the provided straps.

Image: Various usage scenarios for the remote controller with different camera setups.

Uputstvo za upotrebu

1. Funkcije gumba

Image: Remote controller button layout and functions.

• Shutter Button (Red Circle):
  • Long Press: Put the camera to sleep or wake it up.
  • Short Press: Take a photo or start/stop video recording. When the camera is in sleep mode, wake the camera and record a snapshot.
• Quick Switch Button (Side Button, also acts as Power Button):
  • Long Press: Turn the remote control on or off.
  • Short Press: When the remote control is connected to the camera, it can switch between camera shooting modes.
• Pairing Button (Top Button):
  • Long Press: Starts pairing the remote with the camera.
  • Short Press: Awakens the camera when the remote is connected. Cancels pairing if in the pairing process.

2. Multi-function Screen Digital Display

The remote control features a multi-function screen that provides real-time information:

Image: Explanation of the remote controller's screen indicators.

1. Camera Verification Code: Displays the verification code for connecting the remote control to the camera. Once the camera is found, both the remote control screen and the camera screen will display the verification code. Click 'Accept' on the camera screen.
2. Camera micro SD Card Information: After successfully connecting to the camera, it displays the number of photos that can be stored on the micro SD card or the recording time available.
3. GPS Positioning Status: Displays the current GPS signal strength. When the remote control is searching for GPS signals, it will be displayed.
4. Connection Status: Displays the Bluetooth connection status with the camera.
5. Battery Level: Indicates the remaining battery life of the remote controller (represented by an icon).
6. Current Mode: Shows the active shooting mode (represented by an icon, e.g., video camera or photo camera).

3. Multi-Camera Control

The remote controller supports controlling up to 16 cameras simultaneously for synchronized shooting. This feature is ideal for capturing dynamic scenes from multiple angles.

Image: Multi-camera control setup.

4. GPS Data Recording

Equipped with a multi-mode satellite positioning module, the remote control accurately records motion data. After connecting to the Mimo APP, you can selectively add real-time motion data such as speed, route, direction, and altitude to your shooting material and export it for saving. This allows for precise recording of every moment.

Image: GPS tracking and data recording feature.

Održavanje

• čišćenje: Use a soft, dry cloth to clean the remote controller. Do not use harsh chemicals or abrasive materials.
• Skladištenje: Daljinski upravljač čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Otpornost na vodu: The device has an IPX4 waterproof rating, meaning it is resistant to splashing water from any direction. It is not designed for submersion. Avoid exposing it to heavy rain or submerging it in water.
• Održavanje baterije: Da biste produžili vijek trajanja baterije, izbjegavajte često potpuno pražnjenje baterije. Redovno je punite, čak i ako se ne koristi duži period.

Rješavanje problema

• Remote not pairing with camera:
  • Ensure both the camera and remote are powered on and within range (up to 25m).
  • Verify the verification code matches on both devices during initial pairing.
  • To clear existing camera connection information and re-enter pairing mode, press and hold the Dugme za brzo prebacivanje (Power Button) and Dugme za uparivanje istovremeno 4 sekunde.
  • If using multi-camera control, ensure the camera's wake-up feature is enabled in its settings (System Settings > Bluetooth Remote Control).
• GPS signal not stable or found:
  • GPS functionality works best outdoors with a clear view of the sky. Indoor use may result in unstable or no GPS signal.
• Daljinski ne reaguje:
  • Check the battery level of the remote controller. Recharge if necessary.
  • Ensure the remote is turned on (long press the Quick Switch Button).
• Unable to switch shooting modes:
  • Ensure the remote is successfully connected to the camera. A short press of the Quick Switch Button should cycle through modes.
• Checking firmware version:
  • Pritisnite Dugme za brzo prebacivanje (Bluetooth Connection Button) 10 times in a row to check the current firmware version displayed on the remote's screen.

Specifikacije

Image: Detailed product specifications.

Korisnički saveti

• Za optimalne GPS performanse, provjerite da li se nalazite na otvorenom vanjskom prostoru sa čistim view of the sky. GPS signal can be unstable indoors.
• When using the remote with multiple cameras, remember that the camera's wake-up function via the remote might not work. Ensure cameras are already active or manually woken.
• The remote is primarily designed for DJI Osmo Action series cameras (Action 4, 5 Pro, 6). Compatibility with other brands like Insta360 is not guaranteed and may not work as expected.
• The remote can record speed and other motion data, which can be viewed and integrated with your footage via the DJI Mimo app.

Garancija i podrška

Za informacije o garanciji, tehničku podršku ili upite o servisiranju, obratite se direktno prodavcu ili proizvođaču. Sačuvajte dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.