1. Uvod
The Komshine KPV-53 is a versatile 2-in-1 device integrating an Optical Power Meter (OPM) and a Visual Fault Locator (VFL). It is designed for efficient and accurate testing of fiber optic networks, allowing measurement of optical power and detection of fiber disconnections. This manual provides detailed instructions for the proper setup, operation, and maintenance of your KPV-53 device.
2. Ključne karakteristike
- 2-u-1 funkcionalnost: Integrates Optical Power Meter (OPM) and Visual Fault Locator (VFL).
- Podrška za talasne dužine: Measures optical power across 7 calibrated wavelengths: 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, and 1625nm.
- Univerzalni interfejs: Equipped with a 2.5mm universal interface, compatible with SC, FC, ST, and LC connectors (with optional adapters).
- Built-in VFL: Features a 10mW Visual Fault Locator for quick and convenient detection of fiber disconnections.
- Izdržljiv dizajn: Includes a dust-resistant rubber cap, robust rubber armor, and an anti-wrestling silicone jacket for enhanced protection against drops and dust.
- LED pozadinsko osvetljenje: Ensures clear display readability in various lighting conditions.
- Rad prilagođen korisniku: Simple one-key start and automatic shutdown function to conserve battery life.
- Produženi vijek trajanja baterije: Provides approximately 50 hours of operation in continuous mode.
- Ergonomski dizajn: Features a scaffold design for comfortable and convenient handling during use.
3. Sadržaj paketa
Molimo Vas da pažljivo provjerite paket kako biste bili sigurni da su svi artikli prisutni i neoštećeni:
- Komshine KPV-53 Fiber Optic Power Meter & VFL
- Kratki vodič
- Garancijska kartica
- (Batteries are typically not included and must be purchased separately)
4. Specifikacije
| Parametar | Jedinica | Tipično | Napomena |
|---|---|---|---|
| Optički mjerač snage (OPM) | |||
| Talasna dužina kalibracije | nm | 850/980/1300/1310/1490/1550/1625 | |
| Tip detektora | InGaAs | ||
| Preciznost kalibracije | dB | ±0.02 | @ -3dBm |
| Raspon snage | dBm | −70~+6 / −50~+26 | |
| Displej jedinica | dB, dBm, uW | ||
| Optical adaptor type | 2.5mm universal + SC | ||
| Dimenzija | mm | 88.5 (Š) x57 (H) x19.5 (D) | |
| Skladištenje podataka | Nema | ||
| Prijenos podataka | Nema | ||
| Automatsko isključivanje | Min | 5 | |
| Vizualni lokator kvarova (VFL) | |||
| Centralna talasna dužina | nm | 650 | Class 3b laser |
| Kompatibilnost vlakana | Single & Multi mode fiber | ||
| Izlazna snaga | mW | 10 | |
| Udaljenost detekcije | KM | 10up | |
| Optical adaptor type | For SC,FC,ST | ||
| Electrical & Environmental | |||
| Snaga | V | Alkaline Battery (3AA 1.5V batteries) | |
| Trajanje baterije | sati | 50 (tip) | Typical in continuous mode |
| Display | LCD with back lights | ||
| Radna temperatura | °C | 20-75 | |
| Temperatura skladištenja | °C | −40~85 | |
| Relativna vlažnost | 95% RH from 0~40°C | Napomena | |
5. Upute za postavljanje
5.1. Instalacija baterije
- Locate the battery compartment on the back of the KPV-53 device.
- Otvorite poklopac odeljka za baterije.
- Insert three (3) AAA 1.5V alkaline batteries, ensuring correct polarity.
- Čvrsto zatvorite poklopac odeljka za baterije.
5.2. Connecting Fiber Optic Cables
The KPV-53 features a 2.5mm universal interface for the Optical Power Meter and a dedicated port for the Visual Fault Locator. Ensure to use the correct adapter for your fiber type.
- Remove the dust cap from the desired port (OPM or VFL).
- Clean the fiber optic connector end-face thoroughly using appropriate fiber cleaning tools.
- Insert the cleaned fiber optic connector into the device port. For OPM, the standard connector is SC UPC, but adapters for FC, ST, and LC are available (optional).
- Osigurajte sigurnu vezu.
6. Uputstvo za upotrebu
6.1. Uključivanje/isključivanje
- Da biste uključili uređaj, pritisnite i držite Snaga dugme (
) dok se displej ne upali. - Za isključivanje pritisnite i držite Snaga button again. The device also features an automatic shutdown function after 5 minutes of inactivity.
6.2. Optical Power Meter (OPM) Function
- Connect the fiber optic cable to the OPM port as described in Section 5.2.
- Pritisnite talasna dužina (λ) button to cycle through the available calibrated wavelengths (850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm) until the desired wavelength is displayed.
- The current optical power measurement will be shown on the LCD in dBm, dB, or uW.
- Setting Reference (REF) and Unit (dB/dBm): Pritisnite REF/dB button to switch between absolute (dBm) and relative (dB) measurements. To set a reference value for relative measurements, press and hold the REF/dB dugme.
- kalibracija: For calibration, connect the KPV-53 to a light source of the same wavelength. Simultaneously press the REF/dB i VFL keys to enter the adjustment interface. Use the talasna dužina (λ) key for downward adjustment and the REF/dB key for upward adjustment. Once the desired calibration is achieved, press the VFL key to save the parameters.
6.3. Visual Fault Locator (VFL) Function
- Connect the fiber optic cable to the VFL port as described in Section 5.2.
- Pritisnite VFL button to activate the red laser.
- Observe the fiber for any light leakage, which indicates a break or fault. The VFL operates in both Continuous Wave (CW) and Modulation modes.
- Pritisnite VFL button again to turn off the laser.
6.4. Video demonstracija
7. Održavanje
7.1. Čišćenje
- Always clean fiber optic connector end-faces before connecting them to the KPV-53 to prevent contamination and ensure accurate measurements. Use lint-free wipes and fiber optic cleaning solutions.
- Keep the device's optical ports covered with dust caps when not in use to prevent dust and debris from entering.
- Vanjski dio uređaja čistite mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
7.2. Skladištenje
- When not in use, store the KPV-53 in its protective packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ako skladištite duže vrijeme, izvadite baterije kako biste spriječili curenje.
8. Otkrivanje problema
- Uređaj se ne uključuje:
- Provjerite jesu li baterije pravilno instalirane i dovoljno napunjene. Po potrebi zamijenite baterije.
- Inaccurate OPM readings:
- Ensure the fiber optic connectors are clean. Verify that the correct wavelength is selected on the OPM. If readings are consistently off, consider recalibrating the device as per Section 6.2.
- VFL laser is not visible:
- Confirm that the fiber optic cable is properly connected to the VFL port. Ensure the VFL function is activated by pressing the VFL button. Check for any obstructions in the VFL output port.
9. Savjeti za korisnike
- Always clean fiber optic connectors before use to ensure accurate measurements and prevent damage to the device's optical ports.
- Utilize the appropriate fiber adapter for your specific connector type (SC, FC, ST, LC) to ensure a proper and secure connection.
- Regularly check the battery levels, especially before critical testing, to avoid interruptions during operation.
- When using the VFL, be mindful of the Class 3b laser and avoid direct eye exposure.
10. Garancija i podrška
The Komshine KPV-53 comes with a 3-year warranty, providing assurance for your investment. For technical support, service inquiries, or to claim warranty, please refer to the contact information provided with your purchase or visit the official Komshine websajt za pomoć.
