VDIAGTOOL VT100 Uputstvo za upotrebu dijagnostičkog alata za automobile

1. Proizvod je gotovview

The VDIAGTOOL VT100 is a versatile car diagnostic tool designed to assist both end-users and professional workshops in vehicle maintenance and troubleshooting. It supports diagnosis of 4 major vehicle systems and offers 5 commonly used service functions, alongside full OBD2 capabilities. The device features a user-friendly interface, multi-language support, and lifetime free online updates.

Image: VT100 2023 Newest Version highlighting key features.

Ključne karakteristike:

• 4 Systems Diagnose: ABS, SRS, Engine, Transmission.
• 5 Frequently-used Service Functions: Oil Reset, EPB Reset, SAS Calibration, ABS Bleeding, Throttle Learn.
• Full 10 OBDII Test Modes.
• Lifetime Free Online Updates via WiFi or USB.
• 11 Language Support.
• Wide Vehicle Compatibility: Over 10,000 models from 70+ American, Asian, and European car brands.
• Linux O.S. system with a 3-inch LCD screen and 16GB mass storage.

Sadržaj paketa:

Image: VT100 device, OBD2 cable, USB cable, and carrying case.

• VDIAGTOOL VT100 Diagnostic Tool
• OBD2 Connection Cable
• USB kabel
• Torbica za nošenje
• Korisnički priručnik (ovaj dokument)

2. Postavljanje i početna upotreba

Izgled uređaja:

• **LCD Display**: Main screen for viewdavanje dijagnostičkih informacija.
• **ESC Button**: Used to go back to the previous menu or cancel an operation.
• **OK Button**: Used to confirm selections or enter menus.
• **Selection Buttons (Up/Down/Left/Right)**: Used for navigating through menus and options.
• **OBD2 Connector**: Connects to the vehicle's OBD2 port.
• **USB Port**: For connecting to a PC for updates or data transfer.

Povezivanje s vozilom:

1. Locate the vehicle's OBD2 port. This is typically found under the dashboard on the driver's side.
2. Provjerite je li kontakt vozila u položaju "UKLJUČENO" (motor može biti isključen ili upaljen, ovisno o testu).
3. Connect the VT100's OBD2 cable to the vehicle's OBD2 port.
4. Uređaj će se automatski uključiti.

3. Uputstvo za upotrebu

3.1. 4 Systems Diagnosis

The VT100 can diagnose four critical vehicle systems: Anti-Brake System (ABS), Supplemental Restraint System (SRS), Engine System, and Transmission System. This allows for comprehensive fault detection and analysis.

Slika: Prekoview of the 4 systems diagnosed by the VT100.

• **Anti-Brake System (ABS) Diagnosis**: Retrieve ABS codes to identify issues within the braking system.
• **Airbag System (SRS) Diagnosis**: Detect electronic parameters within the safety restraint system to check its health status.
• **Engine System Diagnosis**: Monitor ignition, fuel injection, air/fuel ratio, and exhaust emissions to assess engine performance and efficiency.
• **Transmission System Diagnosis**: Read and clear codes, and view live data in automatic transmission systems to ensure optimal gear ratio adaptation.

For each system, you can typically perform the following functions:

• Read Codes: Display Diagnostic Trouble Codes (DTCs).
• Clear Codes: Erase DTCs from the vehicle's ECU.
• Čitanje podataka uživo: View podaci senzora u realnom vremenu.
• View Freeze Frame Data: Snapshot of vehicle conditions when a fault code was set.

Image: OBD2 diagnostic system functions.

3.2. 5 Special Service Functions

The VT100 provides access to five essential maintenance services:

Image: Visual representation of the 5 special service functions.

• **Ulje L**amp Reset Function**: Resets the Engine Oil Life system after an oil change, turning off the oil light.
• **Steering Angle Calibration (SAS)**: Adjusts the steering angle, clears steering sensor fault memory, and turns off the steering wheel warning light.
• **Electronic Parking Brake (EPB) Reset**: Deactivates/activates brake control systems, assists with brake fluid control, opens/closes brake pads, and sets brakes after replacement.
• **ABS Bleeding**: Performs bleeding functions for the Anti-lock Braking System.
• **Throttle Position Reset (Throttle Learn)**: Re-learns the throttle sensor position after cleaning or repair of the throttle body.

Image: Combined view of special and basic diagnostic functions.

3.3. Full OBD2 Test Modes

The VT100 supports all 10 modes of OBDII testing, providing comprehensive engine diagnostics:

• **Reading Codes**: Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs).
• **Erasing Codes & Reset**: Clears DTCs and turns off the Malfunction Indicator Light (MIL).
• **Data Stream**: Views real-time operational data of the vehicle's systems.
• **I/M Readiness Status**: Checks if the various emissions-related systems are operating correctly and are ready for inspection and maintenance testing.
• **Read Live Data Stream**: Displays live sensor data in text and graph format.
• **View Freeze Frame Data**: Shows a snapshot of operating conditions at the time an emission-related fault occurred.
• **O2 Sensor Test**: Retrieves O2 sensor monitor test results for the most recently completed tests.
• **On-Board Monitor Test**: Retrieves results for emission-related powertrain components and systems that are not continuously monitored.
• **Read Vehicle Information**: Retrieves vehicle identification number (VIN), calibration ID (CALID), and calibration verification number (CVN).
• **Component Test**: Allows initiation of a leak test for the vehicle's EVAP system.

Image: Full OBD2 check features.

3.4. Analiza toka podataka uživo

The VT100 allows you to view live data streams from various sensors in both numerical and graphical formats. This feature is crucial for diagnosing intermittent problems and understanding vehicle performance in real-time.

Image: Live data stream display on the VT100 screen.

By comparing and analyzing changes in live data, you can identify issues that might not trigger a fault code, as well as hidden problems within the vehicle's systems.

4. Održavanje i ažuriranja

Doživotna besplatna ažuriranja softvera:

The VDIAGTOOL VT100 offers lifetime free software updates, ensuring your device always has the latest vehicle compatibility and diagnostic features. Updates can be performed online via WiFi or by connecting to a PC via USB.

Image: Free online update options via WiFi or USB.

Procedura ažuriranja:

Via WiFi Connection:

1. On the VT100 device, select the "Update" icon.
2. Choose the WiFi connection mode. The device will search for available WiFi networks.
3. Select your desired WiFi network from the list.
4. If prompted, enter the WiFi password.
5. Once connected, the device will connect to the update server.
6. Select the specific car makes or software updates you wish to install.
7. Slijedite upute na ekranu da biste dovršili ažuriranje.

Via USB Connection:

1. Visit the VDIAGTOOL official webstranica: www.vdiagtool.com.
2. Download the VDIAGTOOL Update Client software to your PC (compatible with Windows 7/8/10).
3. Install the Update Client on your PC.
4. Connect the VT100 device to your PC using the provided USB cable.
5. Launch the VDIAGTOOL Update Client. During the first registration, input the necessary information.
6. Within the Update Client, select the car makes or software updates you require.
7. Click "Download update" and wait for the process to complete.
8. Once finished, you can enjoy the newly updated software.

5. Otkrivanje problema

This section provides general troubleshooting tips for common issues. For more complex problems, please refer to the official VDIAGTOOL websajtu ili kontaktirajte korisničku podršku.

• **Device not powering on**:
  • Ensure the OBD2 cable is securely connected to the vehicle's OBD2 port.
  • Provjerite je li paljenje vozila u položaju "UKLJUČENO".
  • Check the OBD2 port for any damage or debris.
• **Communication error with vehicle**:
  • Confirm the vehicle is OBD2 compliant (most vehicles from 1996 onwards in the US, 2001 in Europe for petrol, 2004 for diesel).
  • Provjerite je li paljenje uključeno.
  • Try connecting to a different OBD2 compliant vehicle to rule out device issues.
  • Check for loose connections in the OBD2 cable.
• **Update issues**:
  • For WiFi updates, ensure a stable internet connection and correct password entry.
  • For USB updates, ensure the VDIAGTOOL Update Client is correctly installed and the USB cable is functioning.
  • Restart the device and your PC (if using USB update) and try again.
• **Incorrect language displayed**:
  • Navigate to the "Settings" menu on the device and select the desired language.
  • If your desired language is not available, perform a software update as described in Section 4.

6. Specifikacije

Image: Detailed product specifications.

Image: Supported languages for the VT100.

Image: Partial list of supported vehicle brands and functions.

7. Garancija i podrška

• **Warranty**: The VDIAGTOOL VT100 comes with a 2-year warranty.
• **Technical Support**: Lifetime free technical support is provided for the product.
• **Contact**: For technical assistance, product inquiries, or warranty claims, please visit the official VDIAGTOOL website at www.vdiagtool.com.

8. Savjeti za korisnike

• **Vehicle Compatibility**: Before performing any advanced functions (like special service functions), always verify compatibility with your specific vehicle model and year. You can often check this on the VDIAGTOOL official website or by contacting their support with your car's VIN.
• **Regular Updates**: To ensure optimal performance and access to the latest vehicle data and features, regularly update your VT100 device via WiFi or USB.
• **Data Interpretation**: When viewing live data or freeze frame data, understanding what the values mean for your specific vehicle is key. Refer to your vehicle's service manual or online resources for expected sensor readings.
• **Safety First**: Always ensure the vehicle is in a safe, stable position (e.g., parking brake engaged, wheels chocked if necessary) before performing any diagnostic or service functions.