1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Miboxer WiFi+2.4G LED Controller. These controllers are designed to provide intelligent control over various LED strip types, including Single Color, Dual White (CCT), RGB, RGBW, and RGB+CCT, through WiFi, 2.4G RF remote, and voice control.
The Miboxer LED controllers support the Tuya Smart app, enabling advanced features such as music rhythm, scene customization, timing, and group control. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Sigurnosne informacije
- Osigurajte ulaznu voltage matches the controller's specifications (DC12-24V or DC12-48V depending on model).
- Ne izlažite uređaj vlazi ili ekstremnim temperaturama.
- Uvijek isključite napajanje prije instalacije ili održavanja.
- Za složene instalacije ožičenja preporučuje se profesionalna instalacija.
- Čuvati van domašaja djece.
3. Varijante proizvoda
Miboxer offers several models of WiFi+2.4G LED controllers, each designed for specific LED strip configurations:
- FUT035W+ (2-in-1 LED Strip Controller): Supports Single Color / Dual White (CCT) output modes.
- FUT037W+ (3-in-1 LED Strip Controller): Supports RGB / RGBW / RGB+CCT output modes.
- WL5 (WiFi 5-in-1 LED Strip Controller): A versatile controller supporting CCT, DIM, RGB, RGBW, and RGB+CCT output modes.
4. Postavljanje i instalacija
4.1 Upute za ožičenje
Ensure power is disconnected before performing any wiring. Connect your LED strips and power supply according to the diagrams below for your specific controller model.
FUT035W+ (2-in-1 Controller) Wiring
This controller supports Single Color and Dual White (CCT) LED strips. Connect the positive (+) and negative (-) terminals from your power supply to the INPUT V+ and V- terminals on the controller. Connect your LED strip to the OUTPUT terminals as follows:
- Jednobojna: Connect the positive (+) of the strip to V+ and the negative (-) to W or CW.
- Dvostruko bijela (CCT): Connect the common positive (+) of the strip to V+, the Warm White (WW) line to WW, and the Cold White (CW) line to CW.
FUT037W+ (3-in-1 Controller) Wiring
This controller supports RGB, RGBW, and RGB+CCT LED strips. Connect the positive (+) and negative (-) terminals from your power supply to the INPUT V+ and V- terminals on the controller. Connect your LED strip to the OUTPUT terminals as follows:
- RGB: Connect the common positive (+) of the strip to V+, and R, G, B lines to R, G, B terminals respectively.
- RGBW: Connect the common positive (+) of the strip to V+, and R, G, B, W lines to R, G, B, W terminals respectively.
- RGB+CCT: Connect the common positive (+) of the strip to V+, and R, G, B, CW, WW lines to R, G, B, CW, WW terminals respectively.
WL5 (5-in-1 Controller) Wiring
The WL5 is a universal controller supporting Single Color, Dual White (CCT), RGB, RGBW, and RGB+CCT LED strips. Connect the positive (+) and negative (-) terminals from your power supply to the INPUT V+ and V- terminals on the controller. Connect your LED strip to the OUTPUT terminals according to its type.
4.2 Instalacija i uparivanje aplikacije
- Download the Tuya Smart App: Scan the QR code on your controller or search for "Tuya Smart" in your mobile app store.
- Povežite se na WiFi: The controllers feature a WiFi + Bluetooth dual module design. Ensure your mobile device is connected to a 2.4GHz WiFi network.
- Activate WiFi Pairing Mode: Long press the 'SET' button on the controller for 3 seconds until the indicator flashes quickly.
- Dodaj uređaj u aplikaciju: Open the Tuya Smart app, follow the on-screen instructions to add a new device. The app will guide you through the pairing process.
4.3 Remote Control Linking (Optional)
To link a 2.4G RF remote control (e.g., FUT007, FUT089, FUT092):
- Provjerite je li kontroler uključen.
- Press the 'SET' button on the controller 1 time to activate linking mode.
- Within a few seconds, press the desired zone button on your Mi-Light 2.4G RF remote. The LED strip should flash to confirm successful linking.
5. Uputstvo za upotrebu
5.1 Tuya Smart App Control
Once paired, use the Tuya Smart app to control your LED strips. The app provides comprehensive control options:
- Podešavanje boje: Select from 16 million colors (for RGB/RGBW/RGB+CCT models).
- Kontrola svjetline: Stepless dimming for smooth transitions.
- Podešavanje temperature boje: Adjust from warm white to cool white (for CCT/RGB+CCT models).
- Music Rhythm Function: Lights automatically change color along with music.
- Prilagođavanje scene: Create and save custom lighting scenes (e.g., "Good night," "Reading," "Work").
- bioritam: Set the state of lights according to the change of sun during one day.
- Sleep/Wake Up Plan: Fade in/out lighting for a natural sleep/wake cycle.
- Postavke vremena: Zakažite paljenje/gašenje svjetala u određeno vrijeme.
- Grupna kontrola: Control multiple lamps of the same type simultaneously.
- Dijeljenje uređaja: Share control of devices with family members.
- Način rada Ne ometaj: When the light is turned off, it needs to be powered on 2 times before the light will light up (suitable for areas with frequent power outages to save energy).
- Tap-to-Run / Automation: Set up ambiances and build smart home automations.
- Dynamic Mode Sheet Switching: Switch between various dynamic lighting modes.
5.2 Upravljanje glasom
The controllers support third-party voice control platforms such as Amazon Alexa and Google Assistant. Link your Tuya Smart account to your preferred voice assistant app and use voice commands to control your lights.
5.3 2.4G RF daljinski upravljač
Use a compatible Mi-Light 2.4G RF remote for direct control within a 30m range. Features include:
- Podešavanje boje.
- Podešavanje osvjetljenja.
- Podešavanje temperature boje.
- Prebacivanje moda.
Signal Transmitting: One lighting fixture can transmit signals from the remote to another lighting fixture within 30m, effectively extending the control distance.
Modes Synchronization: Different lighting fixtures can work synchronously when controlled by the same remote, under the same dynamic mode, and within a 30m distance.
5.4 DMX512 Controllable (for RGB+CCT output mode)
For RGB+CCT output mode, the controller can be integrated with DMX512 systems. This requires an additional DMX512 LED transmitter.
6. Održavanje
- Održavajte kontroler čistim i bez prašine. Za čišćenje koristite meku, suhu krpu.
- Izbjegavajte korištenje jakih kemikalija ili abrazivnih sredstava za čišćenje.
- Osigurajte odgovarajuću ventilaciju oko kontrolera kako biste spriječili pregrijavanje.
- Redovno provjeravajte spojeve ožičenja na znakove istrošenosti ili labavosti.
7. Otkrivanje problema
- Lights not responding to app/remote:
- Check if the controller is powered on.
- Verify WiFi connectivity of the controller and your mobile device.
- Provjerite je li daljinski upravljač pravilno povezan s kontrolerom.
- Provjerite bateriju u daljinskom upravljaču.
- Restart the controller by cycling its power.
- Netačna boja ili način rada:
- Ensure the correct output mode is selected on the controller (if applicable, by pressing the 'SET' button continuously).
- Verify that the LED strip type matches the controller's capabilities (e.g., RGB strip with an RGB controller).
- Trepereća svjetla:
- Proverite voltage and current capacity to ensure it meets the LED strip's requirements.
- Pregledajte ožičenje na labave veze.
- Ensure the PWM frequency setting is appropriate (high frequency 16kHz or low frequency 250Hz can be switched).
8. Specifikacije
| Feature | FUT035W+ (2-in-1) | FUT037W+ (3-in-1) | WL5 (5-in-1) |
|---|---|---|---|
| Naziv proizvoda | 2 in 1 LED Strip Controller (WiFi+2.4G) | 3 in 1 LED Strip Controller (WiFi+2.4G) | WiFi 5 u 1 kontroler LED trake |
| Model br. | FUT035W+ | FUT037W+ | WL5 |
| Ulazni voltage | DC12-24V | DC12-48V | DC12-24V |
| Izlazna struja | Max 12A (6A/Channel) | Max 12A (6A/Channel) | Max 15A (6A/Channel) |
| Communication Protocol | WiFi+2.4GHz | ||
| 2.4G RF kontrolna udaljenost | 30m | ||
| Radna temperatura | -10~40°C | -10~40°C | -20~60°C |
| WiFi standard | IEEE 802.11b/g/n 2.4GHz | ||
| Bluetooth protokol | Bluetooth 4.2 (low power consumption) | ||
| Materijal | ABS | ||
| Certifikacija | CCC, ROHS, CE | ||
| Dimenzije (D x Š x V) | 74.5 mm x 38 mm x 17 mm | 74.5 mm x 38 mm x 17 mm | 124 mm x 38 mm x 23 mm |
9. Savjeti za korisnike
- For optimal WiFi performance, ensure your router is within a reasonable range and operating on the 2.4GHz band.
- When setting up complex scenes or automations, test them thoroughly to ensure they function as expected.
- Consider using the group control feature in the Tuya Smart app for managing multiple LED strips efficiently.
- If experiencing connectivity issues, try resetting the controller's WiFi pairing mode and re-adding it to the app.
10. Garancija i podrška
This product comes with a 2-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For technical support or warranty inquiries, please contact your retailer or the manufacturer's customer service.
