PGST 441

PGST Smoke Detector User Manual

Model: 441 | Brand: PGST

1. Uvod

The PGST Smoke Detector is a high-sensitivity fire alarm designed to provide early warning of smoke and potential fires. Featuring 360-degree all-round detection and a loud 85-decibel alarm, it integrates smart algorithms for reliable performance. This device operates on a 433MHz frequency and includes a low battery reminder for continuous protection. It is suitable for various environments including homes, offices, warehouses, and public spaces.

PGST Smoke Detector highlighting 360-degree detection, high-pitched alarm, high sensitivity, and low battery reminder.
Figure 1: PGST Smoke Detector with key features.

2. Sigurnosne informacije

  • Prije instalacije i upotrebe pažljivo pročitajte sva uputstva.
  • Do not paint the smoke detector. Paint can clog the sensing chambers and prevent the unit from operating correctly.
  • Ne instalirajte u područjima s visokom vlažnošću, ekstremnim temperaturama ili prekomjernom prašinom.
  • Test the smoke detector regularly as described in the 'Operating Instructions' section.
  • Replace batteries immediately when the low battery reminder activates.

3. Sadržaj paketa

  • PGST Smoke Detector (Model 441)
  • Montažni vijci i ankeri
  • Korisnički priručnik (ovaj dokument)

Napomena: Due to air traffic control regulations, batteries are not included in the package. Please purchase the required battery separately.

4. Specifikacije

FeatureSpecifikacija
Broj modela441
Tip otkrivanja360° All-round
Razina zvuka alarma85 decibela
Bežična frekvencija433MHz
MaterijalEco-Friendly ABS Fireproof Material
CertifikacijaCE
Izvor napajanjaBaterija (nije uključena)
KarakteristikeHigh Sensitivity, Low Power Consumption, Real-time Detection, Low Battery Reminder, Sound and Light Alarm, Mobile App Push (with compatible system)

5. Podešavanje

5.1 Instalacija baterije

  1. Carefully open the battery compartment on the back of the smoke detector.
  2. Insert the required battery (type specified on the device or packaging, typically a 9V or AA battery pack) ensuring correct polarity.
  3. Čvrsto zatvorite odeljak za baterije.

5.2 Montiranje detektora

Choose an appropriate location for your smoke detector. For optimal protection, install smoke detectors in every sleeping area and on every level of your home. Avoid placing them near windows, doors, or air vents where drafts might interfere with detection.

  1. Using the provided screws and anchors, securely mount the detector base to the ceiling or wall.
  2. Attach the smoke detector unit to the mounted base by twisting it clockwise until it locks into place.
Nazad view of the PGST Smoke Detector showing mounting points.
Slika 2: Natrag view of the smoke detector with mounting points.

5.3 Pairing with a Compatible Alarm System (433MHz)

This smoke detector is designed to work with compatible 433MHz alarm systems. The pairing process typically involves setting your alarm panel into 'learning mode' and then triggering the smoke detector.

  1. Refer to your alarm system's manual to put the control panel into 'learning' or 'pairing' mode for detectors.
  2. On the smoke detector, press the 'TEST' button (refer to Figure 3). This will send a signal to the alarm panel.
  3. The alarm panel should acknowledge the new device. Assign the smoke detector to a 'Fire Alarm' zone, if prompted.
  4. Confirm successful pairing on your alarm panel.
Front view of the PGST Smoke Detector showing the TEST and MUTE buttons.
Slika 3: Prednja strana view with TEST and MUTE buttons.
Video 1: Demonstrates pairing the smoke detector with a central alarm system and testing its functionality.

6. Uputstvo za upotrebu

6.1 Funkcija samotestiranja

To ensure your smoke detector is functioning correctly, perform a self-test weekly:

  • Press and hold the 'TEST' button on the front of the detector for a few seconds.
  • The detector should emit a loud alarm sound and flash its indicator light.
  • Otpustite dugme. Alarm bi trebao prestati.
  • If the alarm does not sound or the light does not flash, refer to the 'Troubleshooting' section.

6.2 Funkcija isključivanja zvuka

In case of a false alarm (e.g., from cooking fumes), you can temporarily silence the alarm:

  • Press the 'MUTE' button on the front of the detector.
  • The alarm will silence for a short period (e.g., 5-10 minutes) before automatically resetting.
  • If the smoke condition persists, the alarm will reactivate.

6.3 Indikacija alarma

  • dimni alarm: When smoke is detected, the detector will emit a loud 85-decibel siren and its indicator light will flash rapidly. If connected to a compatible alarm system, it will also send a signal to the control panel and potentially push notifications to your mobile app.
  • Podsjetnik na nisku bateriju: Kada je baterija voltage is low, the detector will emit a wireless low voltage code. This signal is typically sent every 24 hours under continuous low voltage. The indicator light may also flash periodically or a chirp sound may be heard.

7. Održavanje

7.1 Čišćenje

Regular cleaning helps maintain the detector's sensitivity and prevents false alarms:

  • Once a month, gently vacuum the exterior of the smoke detector using a soft brush attachment to remove dust and cobwebs.
  • Do not use cleaning solvents or sprays directly on the detector.

7.2 Zamjena baterije

When the low battery reminder activates (wireless code, periodic chirping, or flashing light), replace the battery immediately:

  1. Twist the detector counter-clockwise to remove it from its mounting base.
  2. Otvorite odeljak za baterije.
  3. Izvadite staru bateriju i odložite je u skladu s lokalnim propisima.
  4. Insert a new, fresh battery of the correct type, ensuring proper polarity.
  5. Zatvorite odjeljak za baterije i ponovo pričvrstite detektor na njegovu montažnu bazu.
  6. Perform a self-test (Section 6.1) to confirm proper operation.

8. Otkrivanje problema

  • Detector does not alarm during self-test:
    • Check if the battery is correctly installed and fully charged. Replace if necessary.
    • Ensure the detector is securely attached to its mounting base.
  • Česti lažni alarmi:
    • Clean the detector as described in Section 7.1 to remove dust or debris.
    • Relocate the detector away from cooking fumes, high humidity areas (e.g., bathrooms), or strong air currents.
  • Low battery reminder (chirping/signal):
    • Replace the battery immediately as described in Section 7.2.
  • Detector not pairing with alarm system:
    • Ensure your alarm panel is in the correct 'learning' mode.
    • Verify the smoke detector is within the wireless range of the alarm panel.
    • Confirm the alarm panel supports 433MHz frequency devices.

9. Savjeti za korisnike

  • Strateški plasman: Install smoke detectors on every level of your home, inside each bedroom, and in the hallway outside of sleeping areas.
  • Redovno testiranje: Make it a habit to test your smoke detectors weekly using the 'TEST' button to ensure they are always ready.
  • Emergency Plan: Develop and practice a fire escape plan with all household members, including two ways out of every room and a designated outside meeting point.
  • Know the Sound: Familiarize everyone in the household with the sound of the smoke alarm.

10. Garancija i podrška

Za informacije o garanciji i tehničku podršku, molimo vas da se direktno obratite prodavcu ili proizvođaču. Sačuvajte račun kao dokaz o kupovini.


GauTone Smart Home Security System: Pairing Wireless Smoke Detector and Fire Alarm Test

GauTone Smart Home Security System: Pairing Wireless Smoke Detector and Fire Alarm Test

1:02 • 1280×720 • demonstracija

Povezani dokumenti - Sigurnosni sistem pametnog doma

Preview System Sensor 6424 Projected Beam Smoke Detector Technical Specification
Detailed technical specifications, features, applications, wiring diagrams, and mounting instructions for the System Sensor 6424 Projected Beam Smoke Detector, a 4-wire, 24 VDC infrared detector for large, high-ceiling areas.
Preview Ajax FireProtect Plus User Manual: Smoke, Heat, and CO Detector Guide
Comprehensive user manual for the Ajax FireProtect Plus wireless indoor fire detector. Learn about its features, installation, operation, settings, and maintenance for smoke, heat, and carbon monoxide detection.
Preview USI MI106S Detektor dima i požara: Uputstvo za instalaciju, upotrebu i održavanje
Sveobuhvatni vodič za USI MI106S univerzalni 2-u-1 alarm za dim i požar sa tehnologijom detekcije dima. Obuhvata instalaciju, rad, testiranje, održavanje, rješavanje problema i garanciju za ovaj alarm sa 10-godišnjom zapečaćenom rezervnom baterijom.
Preview Meross MA151/MA152 Pametni detektor dima - uputstvo za upotrebu | Vodič za instalaciju i sigurnost
This comprehensive user manual for the Meross MA151 and MA152 smart smoke alarms details safety features, product specifications, package contents, step-by-step installation, hub pairing, recommended placement, and alert rules for optimal home fire safety.
Preview Alecto SA-16 Detektor dima: Korisnički priručnik i vodič za instalaciju
Sveobuhvatni vodič za fotoelektrični detektor dima Alecto SA-16, koji obuhvata instalaciju, testiranje, održavanje, planiranje evakuacije i sigurnosne karakteristike za kućnu upotrebu.
Preview SZ PGST PG-N01 Bežični povezani detektor dima i ugljičnog monoksida - uputstvo za upotrebu
Ovaj korisnički priručnik pruža sveobuhvatne upute za bežični povezani detektor dima i ugljičnog monoksida SZ PGST PG-N01, koje obuhvataju postavljanje, međusobno povezivanje, načine rada alarma, održavanje, rješavanje problema i tehničke specifikacije za optimalnu sigurnost doma.