1. Uvod
The TILTA Mini Ball Head Bracket is a compact and versatile accessory designed for securely attaching various equipment, such as external monitors or on-board lights, to your camera rig. It offers robust stability and flexible positioning for diverse shooting scenarios.
This manual provides detailed instructions for the setup, operation, and maintenance of your Mini Ball Head Bracket, covering both the Cold Shoe mount (TA-MBH-CS-B) and the 1/4"-20 Thread with Locating Points mount (TA-MBH-1420-B) variants.
Slika 1: Gotovoview of TILTA Mini Ball Head Bracket variants.
2. Komponente
Familiarize yourself with the components of your Mini Ball Head Bracket. The design varies slightly depending on the bottom mounting option.
2.1 Cold Shoe Version (TA-MBH-CS-B)
Slika 2: Eksplodirao view of the Cold Shoe Mini Ball Head Bracket.
- Vijak 1/4"-20: For attaching accessories to the top.
- Silikonski jastučić: Provides grip and protects attached equipment.
- Locking Washer: Secures the top 1/4"-20 screw.
- Kuglasta glava: Allows for angle adjustments.
- M5 Toggle Screw: Locks the ball head's position.
- Cold Shoe Locking Washer: Secures the cold shoe mount.
- Nosač za hladnu obuću: For attaching to cold shoe receivers.
2.2 1/4"-20 Thread with Locating Points Version (TA-MBH-1420-B)
Slika 3: Eksplodirao view of the 1/4"-20 Thread Mini Ball Head Bracket.
- Vijak 1/4"-20: For attaching accessories to the top.
- Silikonski jastučići: Provide grip and protect attached equipment.
- Ball Head Locking Washer: Secures the top 1/4"-20 screw.
- Kuglasta glava: Allows for angle adjustments.
- M5 Toggle Screw: Locks the ball head's position.
- Thumb Screw Locking Washer: Secures the bottom 1/4"-20 screw.
- 1/4"-20 Screw with Locating Pins: For attaching to 1/4"-20 threads with anti-rotation features.
3. Postavljanje i instalacija
Follow these steps to properly install your Mini Ball Head Bracket and attach your desired accessories.
3.1 Attaching the Ball Head to Your Rig
- For Cold Shoe Mount (TA-MBH-CS-B):
- Loosen the Cold Shoe Locking Washer at the bottom of the ball head.
- Slide the cold shoe mount into a cold shoe receiver on your camera, cage, or handle.
- Tighten the Cold Shoe Locking Washer firmly to secure the ball head in place.
- For 1/4"-20 Thread with Locating Pins Mount (TA-MBH-1420-B):
- Ensure the Thumb Screw Locking Washer at the bottom is slightly loosened.
- Align the 1/4"-20 screw and locating pins with the corresponding holes on your camera, cage, or tripod.
- Screw the ball head onto the 1/4"-20 thread until snug.
- Tighten the Thumb Screw Locking Washer to prevent rotation and ensure stability.
Figure 4: Close-up of secure installation using locating points.
3.2 Attaching Accessories to the Ball Head
- Ensure the top 1/4"-20 screw is accessible.
- Place your accessory (e.g., monitor, light) onto the 1/4"-20 screw, ensuring the silicone pad is between the accessory and the ball head for protection and grip.
- Screw the accessory onto the 1/4"-20 thread until it is securely fastened.
- Tighten the Locking Washer (or Ball Head Locking Washer) to prevent the accessory from rotating or loosening during use.
Slika 5: Prample of a monitor mounted on the ball head.
4. Rukovanje kuglastom glavom
The Mini Ball Head Bracket allows for flexible positioning of your attached accessories.
4.1 Podešavanje ugla
- To adjust the angle of your attached accessory, loosen the M5 Toggle Screw.
- Carefully position your accessory to the desired angle. The ball head supports:
- Up to 90° vertical adjustment.
- Up to 125° overall angle adjustment.
- Horizontalna rotacija od 360°.
- Once the desired angle is achieved, firmly tighten the M5 Toggle Screw to lock the ball head in place. Ensure it is secure to prevent accidental movement.
Figure 6: Diagram illustrating the adjustable angles of the ball head.
5. Održavanje
Proper care will extend the lifespan and ensure the reliable performance of your TILTA Mini Ball Head Bracket.
- čišćenje: Use a soft, dry cloth to wipe down the bracket after use. Avoid abrasive cleaners or solvents that could damage the finish or materials.
- inspekcija: Regularly check all screws and moving parts for tightness. Ensure the silicone pads are intact and free from debris.
- Skladištenje: Store the ball head in a clean, dry environment, away from extreme temperatures and humidity.
- podmazivanje: The ball head mechanism is designed for smooth operation. Avoid applying lubricants unless specifically instructed by TILTA support, as this could attract dust and impair performance.
6. Otkrivanje problema
If you encounter issues with your Mini Ball Head Bracket, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Accessory rotates or shifts after tightening. | M5 Toggle Screw not tightened sufficiently; Locking Washer not fully engaged; accessory not seated properly. | Ensure the M5 Toggle Screw and the top Locking Washer are fully tightened. Re-seat the accessory, ensuring it's flush with the silicone pad. |
| Ball head feels loose or wobbly on the rig. | Bottom mounting mechanism (Cold Shoe Locking Washer or Thumb Screw Locking Washer) is loose. | Check and firmly tighten the appropriate bottom locking mechanism for your model. |
| Difficulty adjusting the ball head angle. | M5 Toggle Screw is too tight; debris in the ball joint. | Loosen the M5 Toggle Screw slightly. Inspect the ball joint for any obstructions and clean if necessary. |
| Accessory feels unstable or heavy for the ball head. | Accessory exceeds the maximum load capacity. | Refer to the specifications section for the maximum load capacity (1.5kg / 3.3lbs). Do not exceed this limit. Use a more robust support system for heavier equipment. |
7. Specifikacije
Below are the technical specifications for the TILTA Mini Ball Head Bracket variants:
7.1 Mini Ball Head Mount - Cold Shoe (TA-MBH-CS-B)
Figure 7: Specifications for the Cold Shoe version.
| Feature | Detalj |
|---|---|
| Naziv proizvoda | Mini Ball Head Mount-Cold Shoe |
| SKU | TA-MBH-CS-B |
| Dimenzije proizvoda | 53 × 39 × 28 mm |
| Materijali | Aluminum alloy / Silicone |
| Neto težina | 58 g |
| Boja | Crna |
| Kapacitet opterećenja | Do 1.5 kg (3.3 lbs) |
| Vertical Adjustment | 90° |
| Podešavanje ugla | 125° |
| Horizontalna rotacija | 360° |
7.2 Mini Ball Head Mount - 1/4"-20 Thread with Locating Points (TA-MBH-1420-B)
Figure 8: Specifications for the 1/4"-20 Thread version.
| Feature | Detalj |
|---|---|
| Naziv proizvoda | Mini Ball Head Mount-1/4"-20 Thread with Locating Points |
| SKU | TA-MBH-1420-B |
| Dimenzije proizvoda | 66 × 44 × 23 mm |
| Materijali | Aluminum alloy / Silicone |
| Neto težina | 70 g |
| Boja | Crna |
| Kapacitet opterećenja | Do 1.5 kg (3.3 lbs) |
| Vertical Adjustment | 90° |
| Podešavanje ugla | 125° |
| Horizontalna rotacija | 360° |
8. Savjeti za korisnike
- Quantity per purchase: Please note that the TILTA Mini Ball Head Bracket is sold as a single unit. The product images often display both variants (Cold Shoe and 1/4"-20 Thread) to illustrate the available options, but each purchase includes one ball head bracket of your chosen model.
- Provjerite kompatibilnost: Prije kupovineasing, ensure the chosen model (Cold Shoe or 1/4"-20 Thread with Locating Points) is compatible with your camera rig or accessory.
- Osigurajte sve veze: Always double-check that all screws and locking washers are firmly tightened to prevent accidental drops or damage to your equipment.
- Raspodjela težine: While the ball head supports up to 1.5kg, try to balance the weight of your attached accessory to minimize strain on the ball joint and ensure optimal stability.
9. Garancija i podrška
For warranty information, technical support, or service inquiries, please contact TILTA Official Store directly or visit their official webSačuvajte račun kao dokaz o kupovini.
TILTA Official Store: Posjetite trgovinu