SINOTIMER IL Plug Digitalni programabilni tajmer Uputstvo za upotrebu

1. Proizvod je gotovview

The SINOTIMER IL Plug Digital Programmable Timer Switch is designed to control electrical appliances by setting specific ON/OFF times over a 7-day weekly cycle. It features a digital display, multiple programming options, and a built-in battery for program backup.

Figure 1: SINOTIMER TM518-IL and TM519-IL models.

1.1 Karakteristike

• Up to 20 ON/OFF setting programs.
• 1 Countdown program for ON or OFF countdown switching.
• Time setting includes hour, minute, and week.
• Random function for ON/OFF switching randomly to simulate occupancy, enhancing home security.
• Summer / Winter saving time setting & switching.
• Built-in rechargeable Ni-MH battery (1.2V/40mAh) for program memory backup (over 100 hours / 120 days standby).
• Manual ON/OFF/AUTO switching modes.
• Suitable for various electrical appliances like rice cookers, water dispensers, heaters, liquid electric mosquito coils, and for charging batteries (electric vehicle, digital camera, cell phone).

1.2 Specifikacije

2. Instalacija i početno podešavanje

2.1 Fizička instalacija

1. Plug the timer switch into a standard IL wall socket (230V/50Hz power supply).
2. Plug your appliance (e.g., lamp) into the socket on the timer.
3. Ensure the power consumption of the controlled appliance is within the maximum 3600W resistive load.
4. If the appliance has its own switch, make sure it is switched ON.

Figure 2: SINOTIMER TM518-IL with Israel Plug.

2.2 Resetovanje tajmera

Before first use or after a long period of storage, press the small 'R' (Restore Factory Defaults) button using a pointed object (like a pen tip) to clear all settings. The display will show "MO 00:00" and start in clock mode.

2.3 Podešavanje trenutnog vremena

Da biste podesili trenutni dan i vrijeme:

1. Pritisnite CLOCK dugme, a zatim pritisnite WEEK to scroll up the day of the week until the current day is displayed. Long press WEEK for more than 2 seconds for rapid adjustment.
2. Pritisnite CLOCK dugme, a zatim pritisnite HOUR to scroll up the hour until the current hour. Long press HOUR for more than 2 seconds for rapid adjustment.
3. Pritisnite CLOCK dugme, a zatim pritisnite MIN to scroll up the minute until the current minute. Long press MIN for more than 2 seconds for rapid adjustment.

3. Uputstvo za upotrebu

3.1 Programiranje ciklusa UKLJUČENO/ISKLJUČENO

The timer allows for up to 20 ON/OFF programs. To set a program:

1. Pritisnite PROG dugme jednom. Na ekranu će se prikazati "1 UKLJUČENO".
2. Pritisnite WEEK to select the desired day or group of days for this program. Available combinations include:
   • ponedjeljak
   • utorak
   • srijeda
   • četvrtak
   • petak
   • Subota
   • Nedjelja
   • Monday - Sunday
   • Monday - Friday
   • Saturday - Sunday
   • Monday - Saturday
   • ponedjeljak, srijeda, petak
   • utorak, četvrtak, subota
   • Monday, Tuesday, Wednesday
   • Četvrtak, petak, subota
3. Pritisnite HOUR to set the hour for the "ON" time.
4. Pritisnite MIN to set the minute for the "ON" time.
5. Pritisnite PROG ponovo. Na ekranu će se prikazati "1 ISKLJUČENO".
6. Repeat steps 2-4 to set the "OFF" time for the first program.
7. Nastavite pritiskati PROG to advance through programs 2-20 (ON and OFF settings).
8. Za izlazak iz moda programiranja pritisnite CLOCK key. If no key is pressed for 15 seconds, the timer will automatically return to normal operation mode.

Note: The output is ON during the countdown period.

3.2 Programming Countdown Operation

Da biste postavili tajmer za odbrojavanje:

1. Pritisnite PROG button repeatedly until the display shows "CON ---" (after the 20 groups program).
2. Pritisnite HOUR i MIN buttons to set the desired countdown time (from 1 minute to 99 hours and 59 minutes). Long press HOUR or MIN for more than 2 seconds for rapid adjustment.
3. Koristite MODE key to switch the countdown function between ON or OFF.
4. Pritisnite CLOCK key or wait 15 seconds to save the programmed countdown and return to normal operation mode.

Note: "ON" means output is ON during countdown period. "OFF" means output is OFF during countdown period.

3.3 Manual Countdown Operation

To manually operate or interrupt the countdown function:

1. Pritisnite DEL/CD button for more than 3 seconds to interrupt the countdown function. The display will flash. The output will maintain its current status until the next programmed command.
2. Pritisnite DEL/CD again for more than 3 seconds to resume or re-interrupt the countdown.

Note: The function will switch ON (OFF) immediately once countdown ON (OFF) started and ON/OFF switched after countdown.

3.4 Slučajna funkcija

This feature allows the timer to switch ON and OFF at random times, typically between 6:00 PM and 5:30 AM, to simulate occupancy. For example, it might switch ON randomly between 10 and 26 minutes, then OFF randomly between 20 and 43 minutes, and repeat.

1. When the display shows clock time, press the R button to activate the random function. The "R" icon will appear on the display.
2. Da biste deaktivirali, pritisnite dugme R button again. The "R" icon will disappear.

3.5 Prekidač za ručno upravljanje

The MODE button allows you to manually override the programmed settings at any time:

• Pritisnite MODE da biste se prebacivali kroz sljedeće načine rada:
  • **ON**: Always ON (Timer function disabled).
  • **OFF**: Always OFF (Timer function disabled).
  • **AUTO**: Automatic operation according to programmed settings.

3.6 Summer Time Setting (Daylight Saving)

To adjust for summer time:

1. Pritisnite CLOCK button for 3 seconds. The present time will increase by one hour, and the LCD will display the icon of 'S'.
2. To revert to standard time, press the CLOCK button for 3 seconds again. The 'S' icon will disappear, and the time will go back one hour.

Figure 3: Detailed instructions and button functions (Part 1).

4. Održavanje

• **Cleaning**: Wipe the timer with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
• **Battery**: The built-in Ni-MH rechargeable battery maintains program settings during power outages. It has a standby time of approximately 120 days. The battery recharges automatically when the timer is plugged into a live socket. No user maintenance is required for the battery.
• **Storage**: Store the timer in a cool, dry place when not in use for extended periods.

5. Otkrivanje problema

6. Savjeti za korisnike

• **Security**: Utilize the random ON/OFF function when you are away from home to give the impression that the house is occupied, enhancing security.
• **Isključivanje struje**tages**: The built-in battery ensures your programs are saved during power interruptions, but it's good practice to check the time and program settings after a prolonged outage.
• **Appliance Compatibility**: Always verify that the power consumption of your appliance does not exceed the timer's maximum load rating (16A / 3680W) to prevent damage to both the timer and the appliance.

7. Često postavljana pitanja (FAQ)

Q: Is this timer switch a surge protector?

A: No, this device is a programmable timer switch designed to control the ON/OFF cycles of electrical appliances. It does not provide surge protection or act as a controller protector.

Q: Can I use this timer with any appliance?

A: You can use it with most appliances, provided their power consumption does not exceed 16A or 3680W. Always check the appliance's power rating before connecting.

Q: What happens if the power goes out?

A: The built-in Ni-MH rechargeable battery provides backup for your programmed settings for up to 120 days. The clock will continue to run, and programs will be retained. The battery recharges when the unit is plugged in.

8. Garancija i podrška

For any issues or questions regarding your SINOTIMER Digital Programmable Timer Switch, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.