1. Uvod
The V100 OBD2 Code Reader is a user-friendly diagnostic tool designed for On-Board Diagnostics II (OBD2) and European On-Board Diagnostics (EOBD) compliant vehicles. This device allows car owners to quickly and easily read and clear diagnostic trouble codes (DTCs), view live data, check I/M readiness status, and access vehicle information without the need for professional assistance. Its plug-and-play design and multi-language support make it an essential tool for maintaining your vehicle's health.
2. Karakteristike
- Univerzalna kompatibilnost: Works with all OBD2/EOBD compliant vehicles manufactured since 1996 (USA), 2003 (Europe), 2007 (Asia), and 2009 (China).
- Plug and Play: No batteries required; the device is powered directly by the vehicle's OBD2 port.
- Digitalni prikaz: Features a 128x64 pixel LCD screen for clear display of diagnostic information.
- Sveobuhvatne dijagnostičke funkcije:
- Read & Erase Engine Fault Codes (DTCs)
- View Zamrzni okvir podataka
- Dohvati I/M status spremnosti
- View Informacije o vozilu (VIN, CIN, CVN)
- DTC Lookup: Displays code definitions directly on screen.
- Live Data Stream (MIL Fault Indicator, EVAP System Test, On-board Monitor Test, O2 Sensor Test)
- Podrška za više jezika: English, German, Dutch, Italian, French, Spanish, Polish, Portuguese, Finnish, Chinese.
- Izdržljiva konstrukcija: Made from ABC material.
3. Specifikacije
| Vrsta stavke | Čitači kodova i alati za skeniranje |
| Model | V100 |
| Display | Badit, 128*64 pixel LCD |
| Voltage domet | 8.0 - 18.0 V (powered via vehicle battery) |
| Radna temperatura | -20°C do 70°C (-4°F do 158°F) |
| Temperatura skladištenja | -20°C do 70°C (-4°F do 158°F) |
| Materijal | ABC material |
| Ažuriranje softvera | br |
| Certifikacija | CE |
| Podržani protokoli | SAE J1850 PWM, SAE J1850 VPW, ISO9141-2, ISO14230-4 KWP (5 baud init & fast init), ISO15765-4 CAN (11bit ID & 29bit ID, 500 Kbaud & 250 Kbaud) |
| Težina paketa | 0.221 kg |
| Dimenzije paketa | 18 cm (dužina) x 12 cm (širina) x 3 cm (visina) |
The device supports the following languages: Dutch, English, Finnish, French, German, Italian, Polish, Portuguese, Spanish, Chinese.
4. Postavljanje i instalacija
- Pronađite OBD2 priključak: The OBD2 port is typically located under the dashboard on the driver's side of the vehicle. Refer to the diagram below for common locations.
- Povežite skener: With the vehicle's ignition turned off, firmly plug the V100 OBD2 Code Reader's 16-pin connector into your vehicle's OBD2 port.
- Uključeno: Turn the vehicle's ignition key to the "ON" position (do not start the engine). The V100 scanner will automatically power on, drawing power from the vehicle's battery.
- Započni dijagnozu: The device is now ready for use. Follow the on-screen instructions to navigate the diagnostic menu.
This diagram illustrates typical locations for the OBD2 diagnostic port within a vehicle's interior.
- Područje A: Most models of GM, Volkswagen, Ford, Toyota, Hyundai, Citroen, BMW, and other brands.
- Područje B: Honda, Volkswagen Terament, imported Lexus, and other models.
- Područje C: Dongfeng Citroen, Dongfeng Peugeot, and a small number of other vehicles.
- Područje D: Dongfeng Citroen and a small number of other vehicles.
- Područje E: Other few vehicles.
5. Uputstvo za upotrebu
Once connected and powered on, the V100 will display the main diagnostic menu. Use the navigation buttons (Up/Down arrows, OK, EXIT, DTC) to select and perform various diagnostic functions.
The main screen of the V100, displaying options such as Read Codes, Erase Codes, View Freeze Frame, and I/M Readiness.
5.1. Opcije glavnog menija
- Pročitajte kodove: Select this option to retrieve Diagnostic Trouble Codes (DTCs) stored in the vehicle's Engine Control Unit (ECU). The device will display the code and its definition.
- Obriši kodove: After addressing a fault, select this option to clear the DTCs from the ECU and turn off the Check Engine Light (MIL). Ensure the ignition is on but the engine is off before erasing kodovi.
- View Zamrzni okvir: This function displays a snapshot of sensor data recorded by the ECU when an emission-related fault occurred. This data can help in diagnosing the cause of the fault.
- I/M spremnost: Checks the status of the vehicle's emission-related monitoring systems to determine if they are ready for an inspection/maintenance test.
- Podaci o vozilu: Displays information such as Vehicle Identification Number (VIN), Calibration ID (CIN), and Calibration Verification Number (CVN).
Screenshots showing examples of Vehicle Info, View Freeze Frame data (DTC, FUEL SYS, LOAD_PCT), and I/M Readiness status (MIL Status, Misfire Monitor, Fuel System Mon, Comp. Component).
5.2. DTC Definition Lookup
When a Diagnostic Trouble Code (DTC) is displayed, the V100 provides a direct definition on the screen, eliminating the need to search online. This feature helps in quickly understanding the nature of the fault.
Bivšiample of the V100 displaying a DTC (P0230) and its corresponding definition ("Fuel Pump Primary Circuit").
6. Održavanje
- čišćenje: Obrišite uređaj mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
- Skladištenje: Store the V100 in a clean, dry environment within the specified storage temperature range of -20°C to 70°C (-4°F to 158°F).
- Održavanje kablova: Izbjegavajte pretjerano savijanje ili uvijanje OBD2 kabela kako biste spriječili oštećenje.
7. Otkrivanje problema
- Uređaj se ne uključuje:
- Ensure the OBD2 connector is firmly plugged into the vehicle's port.
- Provjerite je li paljenje vozila u položaju "UKLJUČENO".
- Provjerite napunjenost akumulatora vozilatage; the device requires 8-18V.
- "Link Error" or "No Communication":
- Confirm the vehicle is OBD2/EOBD compliant.
- Ensure the ignition is on and the engine is off.
- Try connecting to a different OBD2 compliant vehicle to rule out device malfunction.
- Some vehicles, especially older models or specific brands, may not be fully compatible.
- Limited Functionality (e.g., no ABS/Airbag data):
- This device is designed for standard OBD2 engine diagnostics only. It does not support special functions like ABS reset, Airbag reset, or other manufacturer-specific systems.
- Poznate nekompatibilnosti:
The V100 may not be compatible with all vehicles, particularly:
- Električni automobili, hibridni automobili i kamioni na 24V (npr. Nissan Leaf).
- Ruski automobili: VAZ, UAZ, LADA.
- Certain Ssangyong models: Actyon (2009-2017), Korando 2.0 TD Diesel (2013-2017), Kyron 2.0 Diesel (2010-2017), Rexton (2011-2017).
- Opel Corsa C 2004 1.3 CDTI.
- Citroen C4/C5.
- Chevrolet automobili.
- Renault models: Logon, Megane, Clio 2.
8. Savjeti za korisnike
- Provjerite kompatibilnost: Prije kupovineasing or using, always check if your vehicle is OBD2/EOBD compliant and falls within the supported manufacturing years. If unsure, consult your vehicle's manual or contact the seller with your car's make, year, engine size, and fuel type.
- Engine Off for Code Clearing: Kadaasing codes, ensure the vehicle's ignition is on but the engine is off to prevent potential issues.
- Understand Limitations: Remember that this tool is primarily for engine-related diagnostics. It will not perform functions like ABS or Airbag system resets.
9. Često postavljana pitanja (FAQ)
- Q: Is the V100 compatible with my [Car Model, Year]?
- A: The V100 is compatible with most OBD2/EOBD compliant vehicles from 1996 (USA), 2003 (Europe), 2007 (Asia), and 2009 (China). However, specific models, especially older ones or certain brands (e.g., some Renault, Ssangyong, Russian cars), may have known incompatibilities. Please refer to the "Troubleshooting" section for a detailed list of known non-compatible vehicles.
- Q: Does this scanner support ABS or Airbag system diagnostics/reset?
- A: No, the V100 OBD2 Code Reader is designed exclusively for engine-related diagnostics and does not support special functions such as ABS reset, Airbag reset, or other non-engine specific systems.
10. Podrška
For further assistance, technical support, or inquiries regarding product functionality and compatibility, please contact the seller or manufacturer directly. Keep your product model (V100) and any relevant vehicle information (make, model, year, engine type) ready when seeking support.
