1. Uvod
Thank you for choosing the Pracmanu 30m Mini Laser Distance Meter. This compact and high-precision digital laser rangefinder is designed for quick and accurate distance measurements, making it an essential tool for construction, DIY projects, and professional use. Please read this manual carefully before using the device to ensure safe and optimal operation.
2. Sigurnosne informacije
2.1 Laser Safety
This device uses a Class II laser. Observe the following safety precautions:
- Ne gledajte direktno u laserski snop.
- Ne usmjeravajte lasersku zraku na ljude ili životinje.
- Izbjegavajte direktno izlaganje očiju laserskom zraku.
- Nemojte rastavljati niti modificirati uređaj.
2.2 Sigurnost baterije
- Use only the specified charging adapter (5V==1A).
- Ne izlažite uređaj ekstremnim temperaturama ili direktnoj sunčevoj svjetlosti.
- Do not attempt to replace the built-in lithium battery.
- Držite uređaj dalje od vode i vlage.
Disclaimer: Accidents caused by failure to charge according to the specified requirements are not the responsibility of the manufacturer.
3. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- Pracmanu 30m Mini Laser Distance Meter
- USB kabl za punjenje
- User Manual (this document and a more detailed PDF version)
4. Proizvod je gotovview
The Pracmanu Mini Laser Distance Meter features a clear digital display and intuitive controls for ease of use.
4.1 Komponente uređaja
- Zaslon: Shows measurement results, battery status, and measurement mode.
- Dugme MEAS: Initiates single or continuous measurements.
- CLEAR / Power Button: Clears current measurement or powers the device on/off.
- USB-C priključak za punjenje: Za punjenje interne baterije.
5. Podešavanje
5.1 Punjenje uređaja
The device is equipped with a built-in 3.7V 350mAh lithium battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB cable.
- Connect the USB charging cable to the device's USB-C port.
- Connect the other end of the USB cable to a power adapter (5V==1A recommended) or a computer USB port.
- During normal charging, the LED indicator light on the device will remain on.
- Once the battery is fully charged, the LED indicator light will turn off.
6. Uputstvo za upotrebu
6.1 Uključivanje/isključivanje napajanja
- Da biste uključili uređaj, pritisnite i držite CLEAR / Power dugme.
- Da biste isključili uređaj, pritisnite i držite CLEAR / Power ponovo dugme.
6.2 Pojedinačno mjerenje
For a quick, one-time distance reading:
- Uvjerite se da je uređaj uključen.
- Usmjerite laser prema ciljanoj površini.
- Pritisnite MEAS dugme. Mjerenje će biti prikazano na ekranu.
6.3 Kontinuirano mjerenje
For dynamic measurements, such as finding maximum or minimum distances while moving the device:
- Uvjerite se da je uređaj uključen.
- Activate continuous measurement mode (typically by a short press of the MEAS button after power on, or a double-press, refer to on-screen icons).
- Move the device slowly across the area you wish to measure. The device will automatically calculate and display the maximum and minimum values encountered during the movement.
6.4 Measurement Reference
The device measures from its rear reference point. When taking measurements, ensure you account for the device's physical length if measuring from an edge or corner where the device itself occupies space.
6.5 Measurement Unit
The default measurement unit is meters (m).
7. Održavanje
- Očistite uređaj mekom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
- Keep the laser lens clean to ensure accurate measurements.
- Uređaj čuvajte na suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
- Recommended storage temperature: -20°C to 60°C.
8. Otkrivanje problema
- Uređaj se ne uključuje ili ne puni:
- Ensure the USB cable is securely connected and the power adapter meets the 5V==1A requirement. Check if the LED indicator light is on during charging.
- Netačna mjerenja:
- Verify that the laser path to the target is clear and unobstructed. Ensure the device is held steady. Remember that the device measures from its rear reference point.
- How to perform continuous measurement?
- After powering on, activate continuous measurement mode (refer to on-screen icons or a quick press of the MEAS button). Move the device slowly to capture max/min values.
9. Specifikacije
| Feature | Specifikacija |
|---|---|
| Brand Name | pracmanu |
| Measurement Range | 0.05 - 30 min |
| Preciznost mjerenja | ±2mm |
| Brzina mjerenja | 0.5 - 1s |
| Measurement Unit | m |
| Kontinuirano mjerenje | Da |
| Charging Type | Tip-C |
| Vrsta baterije | Ugrađena litijumska baterija od 3.7V 350mAh |
| Laser Class | Klasa II |
| Radna temperatura | -5°C do 40°C |
| Temperatura skladištenja | -20°C do 60°C |
| Veličina | 70*34*19mm |
| Certifikacija | CE |
| Baterija uključena | Da |
| Visoko zabrinjavajuća hemikalija | Nema |
10. Savjeti za korisnike
- Referenca mjerenja: Always remember that the device measures from its rear. When measuring from a wall or an object's edge, factor in the device's length for precise results.
- Kontinuirano mjerenje: For best results when using continuous measurement, move the device slowly and steadily across the desired path. This allows the device to accurately capture the maximum and minimum distances.
- Punjenje: Use a standard 5V/1A USB charger for optimal charging speed and battery longevity.
11. Garancija i podrška
This product is covered by a standard manufacturer's warranty. For specific warranty terms, service, or technical support, please refer to the detailed user manual PDF or contact your retailer.
A comprehensive user manual in PDF format is available for download and reference:
