Uvod
The HANMATEK TI120 is a versatile, rugged, and ergonomically designed infrared thermal imager engineered for professional maintenance and detection tasks. It features a UFPA detector for excellent infrared resolution and offers a variety of palette modes for diverse applications. This manual provides essential information for the safe and effective use of your thermal imager.
Sadržaj paketa
Molimo Vas da prilikom prijema provjerite sadržaj paketa kako biste bili sigurni da su svi artikli prisutni:
- TI120 Thermal Imager
- Torbica za nošenje
- Remen za zapešće
- USB kabel Type-C
- 32GB Micro SD kartica
- Korisnički priručnik (ovaj dokument)
Setup
1. Punjenje baterije
The TI120 is equipped with a 3.7V/5000mAh rechargeable Li-ion battery. For optimal performance, fully charge the device before first use. Connect the Type-C USB cable to the device and a suitable power adapter (not included). The battery indicator on the screen will show charging status. A full charge typically takes approximately 5 hours and provides continuous use for more than 6 hours.
2. Umetanje Micro SD kartice
The device comes with a 32GB Micro SD card for storing thermal images. Locate the SD card slot, typically on the side of the device, and insert the card until it clicks into place. Ensure the device is powered off before inserting or removing the SD card.
Uputstvo za upotrebu
1. Device Overview i kontrole
Familiarize yourself with the buttons and display:
- Dugme za napajanje: Pritisnite i držite za uključivanje/isključivanje uređaja.
- Dugme SET: Pristupite opcijama menija i potvrdite odabire.
- Navigacijski gumbi (gore, dolje, lijevo, desno): Krećite se kroz menije i podešavajte postavke.
- Picture Browsing Button: View pohranjene slike.
- Dugme za povratak: Povratak na prethodni ekran ili izlazak iz menija.
- Dugme za kameru: Capture thermal images.
- Dugme za osvjetljenje: Activate the built-in LED light.
2. Image Mode Selection (Fusion Modes)
The TI120 offers five image fusion modes to combine thermal and visible light images for enhanced detail. Use the left and right navigation buttons under the live image screen to adjust the degree of fusion:
- 0% (Pure visible light image)
- 25%
- 50%
- 75%
- 100% (Pure thermal image)
3. Palete boja
Izaberite jednu od 5 paleta boja za efikasnu vizualizaciju temperaturnih razlika:
- Rainbow
- Iron oxide red
- Hladna boja
- Bijela vrućina
- Crna vrućina
4. Temperature Measurement Methods
The TI120 supports multiple temperature measurement methods:
- Focused Area (ROI) Temperature Measurement: Measure temperature within a selected region of interest.
- Center Point Temperature Measurement: Provides accurate temperature readings at the center of the screen.
- Automatic Tracking of High and Low Temperatures: The device automatically identifies and displays the highest and lowest temperature points, helping to confirm anomalies quickly.
5. High and Low Temperature Alarm
The device features a high and low temperature alarm with LED lights flashing to alert the user when temperatures exceed or fall below set thresholds. This is particularly useful for continuous monitoring.
6. Data Communication and PC Software
The TI120 supports connection to a PC via its Type-C USB port for data transfer and analysis. The PC software offers two modes:
- Način rada USB diska: Browse images, analyze image data, and generate/export PDF reports.
- USB Camera Mode: Take pictures, project images, and automatically save pictures for over-temperature events.
7. Prijave
The HANMATEK TI120 is suitable for a wide range of applications, including:
- Mehanički pregled
- Electrical fault detection (e.g., distribution boxes, motors)
- HVAC system inspection (e.g., pipe leaks)
- DIY repair detection
- Energy auditing
- Održavanje objekta
- Auto repair
- Floor heating detection
- Detekcija curenja vodovodne cijevi
Održavanje
- čišćenje: Use a soft, dry cloth to clean the device body. For the lens, use a specialized lens cleaning cloth and solution. Do not use abrasive cleaners or solvents.
- Skladištenje: Store the device in its carrying case in a cool, dry place when not in use. Avoid extreme temperatures and high humidity.
- Održavanje baterije: Da biste produžili vijek trajanja baterije, izbjegavajte često potpuno pražnjenje baterije. Redovno punite uređaj, čak i ako ga ne koristite duži period.
- Zaštita životne sredine: The TI120 has an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it is not designed for submersion.
Rješavanje problema
- Uređaj se ne uključuje: Provjerite je li baterija napunjena. Spojite je na izvor napajanja i pokušajte ponovo.
- Image unclear/blurry: Check if the lens is clean. Adjust the focus if available (this model has fixed focus). Ensure proper distance to the object.
- Očitavanja temperature izgledaju netačna: Verify the emissivity setting is correct for the material being measured. Ensure there are no strong heat sources interfering with the measurement area.
- Nije moguće prenijeti files na PC: Ensure the USB cable is properly connected and the device is in USB Drive mode. Check PC software installation.
Specifikacije
| Feature | Specifikacija |
|---|---|
| Infrared Spectral Bandwidth | 8~14μm |
| Thermal Imaging Pixel | 10800 (120*90) |
| Thermal Imaging Sensitivity | ≤60mK |
| Field Of View Angle (FOV) | 50(H)*38(V) |
| Frame Rate | ≤25Hz |
| Temperaturni opseg | -20°C ~ 400°C (-4°F ~ 752°F) |
| Preciznost | ±2°C or 2% (take the maximum value, at room temperature 25°C) |
| Resolution Ratio | 0.1°C |
| Temperature Measurement Response Time | ≤500ms |
| Display Type | 2.8" TFT LCD |
| Rezolucija ekrana | 320*240 |
| Format slike | BMP |
| Visible Light Lens | Da |
| Rezolucija vidljive svjetlosti | 640*480 |
| Visible Light Field Of View Angle (FOV) | 8 stepeni |
| Komunikacija podataka | USB Type-C |
| Baterija | Li-ion 3.7V/5000mAh |
| Service Time | Ne manje od 6 sati |
| Vrijeme punjenja | ≤ 5 sata |
| Charging Voltage / Struja | 5V/2A |
| Temperatura skladištenja | -20°C ~ 60°C (-4°F ~ 140°F) |
| Radna temperatura | 0 ~ 50°C (32°F ~ 140°F) |
| Radna vlažnost | ≤90%RH (bez kondenzacije) |
| Measuring Distance | 0.2m-5m (best 1m) |
| Jezici | Chinese, English, Russian, Spanish, French, Italian, Japanese, German |
| Je pametni uređaj | Da |
| Certifikacija | CE |
Korisnički saveti
- Hydraulic Pipe Detection: The TI120 can effectively detect hydraulic pipe passages by identifying temperature differences caused by fluid flow or leaks. Look for distinct thermal patterns along the pipe's path.
- Residential Electrician Use: This device is suitable for residential electricians to detect overheating components in distribution boxes, wiring, and appliances, helping to prevent electrical fires and failures.
- Optimalna udaljenost mjerenja: For the most accurate readings, maintain a measurement distance between 0.2m and 5m, with 1m being ideal.
- Podešavanje emisivnosti: For precise temperature measurements, especially on different materials, ensure the emissivity setting is correctly adjusted in the device's menu.
Garancija i podrška
For warranty information and technical support, please refer to the warranty card included in your package or contact HANMATEK Official Store directly. Keep your purchase receipt as proof of purchase.
