KT3200 Termostat s tajmerom i utičnicom, digitalni regulator temperature, Korisnički priručnik

1. Uvod

The KETOTEK KT3200 is a versatile digital temperature controller integrated into a socket timer. It displays the measured temperature and allows users to set start and stop temperatures to control heating or cooling equipment. This device also features a time function for independent day and night temperature control. It is widely applicable in intelligent control systems for heating, refrigeration, brewing, reptile habitats, aquaculture, greenhouses, and general home use.

2. Sigurnosna upozorenja

Please read these safety warnings carefully before operating the device.

• Before using this unit, inspect the plastic casing for any damage. Do not use the device if it appears damaged.
• The relay has a maximum capacity of 16A. For resistive loads, use less than 14A. For inductive loads, use less than 2A.
• Do not use this unit in environments with explosive gases, excessive steam, or high dust concentrations.
• Ne dozvolite djeci da rukuju uređajem.
• Ne pokušavajte sami da rastavite uređaj.

3. Proizvod je gotovview i Dimenzije

3.1. Komponente uređaja

• M dugme: Prebacite način rada
• + Dugme: Povećajte vrijednost
• Dugme OK: Select / C°/F° key (Press for 3s to switch C/F)
• - Dugme: Taster za smanjenje
• Back / Reset Key: Pritisnite 3s za resetovanje
• Output Work Indicator: Light indicating output status.

3.2. Dimenzije

• širina: 5.8 cm
• Visina: 11.8 cm
• dubina: 3.2 cm
• Dimenzije senzora: 2.4 cm (length) x 0.5 cm (diameter)
• Dužina kabla senzora: 290 cm (3 metara)

3.3. Available Plug Types

• US Type

  

• EU Type

  

• FR Type

  

• AU Type

  

• Tip za UK

  

4. Načini rada

The KT3200 offers three distinct operating modes to suit various temperature control and timing needs.

4.1. M1 TC: Temperature Control Mode

In this mode, the device controls heating or cooling based on a set start and stop temperature.

• Postavka: Define a 'start temperature' and a 'stop temperature'.
• Način grijanja: Set the start temperature to be lower than the stop temperature. The device will activate the heating equipment when the measured temperature falls below the start temperature and deactivate it when it reaches the stop temperature.
• Način hlađenja: Set the start temperature to be higher than the stop temperature. The device will activate the cooling equipment when the measured temperature rises above the start temperature and deactivate it when it falls to the stop temperature.

4.2. M2 TC+Timer: Day/Night Temperature Control

This mode allows for different temperature control settings during daytime and nighttime periods within a 24-hour cycle.

• Postavka: Set the current clock, Time 1 (start of day period), Time 2 (start of night period), TC 1 (temperature control settings for day), and TC 2 (temperature control settings for night).
• Operacija: During the daytime period (from Time 1 to Time 2), the device will operate according to the TC 1 program. During the nighttime period (from Time 2 to Time 1), it will switch to the TC 2 program.

4.3. M3 Timer: 2 Timer Period Timer Only

This mode functions purely as a timer, controlling the output based on two set time periods.

• Postavka: Set the current clock, Time 1 (ON start time), and Time 2 (OFF start time).
• Operacija: The output will be ON during the period from Time 1 to Time 2. The output will be OFF during the period from Time 2 to Time 1.

5. Specifikacije

6. Održavanje

To ensure the longevity and accurate performance of your KT3200 thermostat, follow these simple maintenance guidelines:

• čišćenje: Gently wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing i elektronske komponente.
• Održavanje senzora: Keep the temperature sensor clean and free from debris. Ensure it is not exposed to extreme physical stress or sharp objects that could damage the cable or probe.
• Skladištenje: Kada se uređaj ne koristi duži period, čuvajte ga na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

7. Otkrivanje problema

If you encounter issues with your KT3200 thermostat, consider the following troubleshooting steps:

• Uređaj se ne uključuje: Ensure the device is securely plugged into a functional power outlet. Check the power supply voltage to ensure it is within the specified range (100~250VAC).
• Netačna očitanja temperature: Verify that the temperature sensor is properly connected and positioned in the area where temperature needs to be measured. Ensure the sensor is not damaged. You may use the temperature calibration function if you suspect a consistent offset.
• Output Not Activating/Deactivating: Check your set start and stop temperatures or timer settings (Time 1, Time 2) to ensure they are configured correctly for your desired operation. Confirm that the connected appliance is working correctly.
• Uređaj ne reagira: Try performing a reset by pressing the 'Back / Reset' key for 3 seconds. This will revert settings to default, so reconfigure as needed.
• Problemi s memorijskom funkcijom: Remember that only the clock needs to be reset after a power failure if the device was in M2 or M3 mode. All other data is saved.

Ako problemi i dalje postoje nakon što ste pokušali izvršiti ove korake, obratite se korisničkoj podršci.

8. Savjeti za korisnike

• Power Outage Oporavak: The KT3200 features a memory function that saves all settings except the clock after a power failure. If operating in M2 (Temperature Control + Timer) or M3 (Timer Only) mode, remember to reset the clock upon power restoration. If in M1 (Temperature Control) mode, the device will automatically resume operation.
• Prebacivanje jedinice temperature: Easily switch between Celsius (℃) and Fahrenheit (℉) by pressing the 'OK' button for 3 seconds.
• Svestranost primjene: This thermostat is highly versatile and can be used for various applications such as controlling heaters in a room, maintaining optimal temperatures in incubators, regulating aquarium temperatures, or managing climate in greenhouses.

9. Garancija i podrška

The KT3200 Timer Socket Thermostat comes with a 6-month warranty from the date of purchase.

For any inquiries or support needs, please contact our customer service. All emails will be answered within 1 business day. We are committed to providing assistance and resolving any issues you may encounter with your product.