IDEALHOUSE 4qEsFnuE-HUyPAfIv7518A9pyG5cZ

IDEALHOUSE 54-inch Fluted 7-Drawer Dresser User Manual

Model: 4qEsFnuE-HUyPAfIv7518A9pyG5cZ

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your IDEALHOUSE 54-inch Fluted 7-Drawer Dresser with LED Lights and Charging Station. Please read all instructions carefully before assembly and use to ensure safe and proper operation. Keep this manual for future reference.

Sigurnosne informacije

UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može dovesti do ozljeda ili oštećenja proizvoda.

  • Uvijek sastavljajte komodu na mekoj, čistoj površini kako biste spriječili ogrebotine.
  • Prije upotrebe provjerite jesu li svi vijci i pričvršćivači čvrsto zategnuti. Povremeno provjeravajte i po potrebi zategnite.
  • Ne pretrpavajte ladice. Ravnomjerno rasporedite težinu.
  • Držite male dijelove podalje od djece tokom sastavljanja.
  • Koristite stanicu za punjenje samo za uređaje unutar navedene zapreminetage i trenutne ocjene.
  • Do not expose the charging station or LED lights to water or excessive moisture.

Ugradnja uređaja protiv prevrtanja

To prevent serious injury from tipping, this dresser must be permanently attached to the wall using the provided anti-tipping device. This step is crucial for safety, especially in households with children or pets.

  1. Pronađite komponente uređaja protiv prevrtanja u paketu s hardverom.
  2. Postavite komodu na željeno mjesto.
  3. Attach one bracket to the back of the dresser near the top edge using the provided screws.
  4. Mark the wall where the second bracket will align with the first. Ensure the dresser is level.
  5. Drill a pilot hole in the wall at the marked location. Use appropriate wall anchors for your wall type (e.g., drywall, plaster, stud).
  6. Attach the second bracket to the wall.
  7. Securely connect the two brackets with the strap or cable provided, ensuring there is no slack.
Image showing the installation of an anti-tipping device on the back of the dresser, securing it to the wall.

Image: Anti-Tipping Device Installation. This image illustrates the correct method for installing the anti-tipping device, showing how the dresser is secured to the wall to prevent accidental tipping.

Potreban sadržaj paketa i alati

Sadržaj paketa:

  • All dresser panels (top, bottom, sides, back, drawer fronts, drawer sides/backs)
  • Hardware kit (screws, dowels, cam locks, drawer slides, handles, anti-tipping device)
  • LED svjetlosna traka i kontroler
  • Stanica za punjenje s kabelom za napajanje
  • Assembly instructions (separate document, if applicable)

Potreban alat (nije uključen):

  • Phillips odvijač
  • Hammer (for dowels and back panel nails)
  • Drill with appropriate drill bits (for wall anchors for anti-tipping device)
  • Merna traka

Uputstva za sastavljanje

Assembly of this dresser requires two adults. Follow the step-by-step diagrams and instructions provided in the separate assembly guide included with your product. The general steps are outlined below:

  1. Raspakujte i identifikujte dijelove: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Verify all parts and hardware are present against the parts list in your assembly guide.
  2. Sastavite glavni okvir: Begin by connecting the side panels to the bottom and top panels using the provided hardware (e.g., cam locks, dowels, screws).
  3. Ugradnja zadnje ploče: Pričvrstite zadnju ploču na sastavljeni okvir.
  4. Sastavljanje ladica: Construct each drawer box by attaching the sides, front, and back panels. Install the drawer bottom.
  5. Attach Drawer Slides and Handles: Secure the drawer slides to both the dresser frame and the assembled drawers. Attach the gold handles to the drawer fronts.
  6. Instalirajte stanicu za punjenje: Integrate the charging station unit into the designated top compartment. Ensure the power cord is routed correctly.
  7. Instalirajte LED svjetla: Adhere the LED light strip to the interior of the open top compartments as directed in the assembly guide. Connect the controller.
  8. Umetnite ladice: Carefully slide the assembled drawers into their respective tracks.
  9. Ugradite uređaj protiv prevrtanja: Follow the instructions in the Safety Information section to secure the dresser to the wall.

Product Overview & Dimenzije

The IDEALHOUSE dresser features a modern design with a curved profile, fluted wood drawers, and gold handles. It includes six spacious drawers and two open top compartments, providing ample storage. The top surface also integrates a charging station and LED lighting.

Diagram showing the dimensions of the IDEALHOUSE dresser, including overall width, depth, height, and individual drawer dimensions.

Slika: Dimenzije proizvoda. This diagram provides a clear visual representation of the dresser's overall measurements and the internal dimensions of its drawers.

  • Ukupne dimenzije (D x Š x V): 15.5 inča x 53.9 inča x 37.8 inča
  • Large Drawer Internal Dimensions: Approximately 11.8 inches (D) x 26.1 inches (W) x 7.6 inches (H)
  • Small Drawer Internal Dimensions: Approximately 11.8 inches (D) x 17.4 inches (W) x 7.6 inches (H)
  • Broj ladica: 6 (plus 2 open top compartments)
  • Težina artikla: 141.1 funti

Upravljanje stanicom za punjenje

Your dresser is equipped with a convenient charging station to power your electronic devices.

Close-up image of the dresser's top surface showing the integrated charging station with two AC outlets and two USB ports, and a power cord.

Image: Functional Charging Hub. This image highlights the built-in charging station, detailing the AC outlets and USB ports available for device charging.

Karakteristike:

  • 3 Standard AC Outlets (110V/15A)
  • 2 USB porta (5V/2A)
  • Integrated 6.56 ft (approximately 2 meters) Power Cord

Upotreba:

  1. Plug the dresser's main power cord into a standard wall outlet.
  2. Connect your phone, tablet, lamp, or other electronic devices to the AC outlets or USB ports on the charging station.
  3. Ensure devices are compatible with the specified voltage i struja.

Upravljanje LED svjetlima

The integrated RGB LED lights can enhance the ambiance of your room.

Lifestyle image of the dresser in a room, with the LED lights illuminated in the open top compartments, showcasing the ambient lighting effect.

Image: LED Lights in Use. This image demonstrates the dresser with its LED lights activated, providing ambient lighting to the open storage areas.

Karakteristike:

  • RGB LED lighting with over 60,000 color options.
  • Control via physical button or dedicated mobile application.
  • Podesivi nivoi osvetljenosti.
  • Multiple modes: Music sync, microphone sync, custom color settings, and timer functions.

Upotreba:

  1. Ensure the dresser's main power cord is plugged in.
  2. Use the control button (typically located near the LED strip or charging station) to cycle through basic colors and turn the lights on/off.
  3. For advanced control (color selection, brightness, modes, timer), download and install the recommended mobile application (refer to the separate LED light instruction sheet for app details and pairing instructions).

Operating the Drawers

The dresser features six fluted drawers designed for smooth operation.

Image showing the dresser with several drawers open, revealing ample storage space for various items like clothes, books, and cosmetics.

Image: Spacious Storage Space. This image illustrates the dresser with its drawers open, demonstrating the capacity for organizing various household items.

Karakteristike:

  • Smooth-gliding metal drawer slides for easy opening and closing.
  • Functional brushed aluminum handles for comfortable grip.
  • Fluted design on drawer fronts for aesthetic appeal.

Upotreba:

  1. To open a drawer, gently pull the handle outwards.
  2. To close a drawer, push it inwards until it is fully seated.
  3. Avoid forcing drawers open or closed, as this can damage the slides.
  4. Do not stand or sit on open drawers.

Održavanje

Pravilna njega osigurat će dugotrajnost i izgled vaše komode.

čišćenje:

  • Za opšte čišćenje, obrišite površine mekom,amp tkanina.
  • Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the polished finish or engineered wood.
  • Odmah obrišite prolivenu tečnost kako biste spriječili mrlje ili oštećenja od vode.
  • Redovno brišite prašinu suhom, mekom krpom.

Care for Electrical Components:

  • Ensure the charging station and LED lights are unplugged from the wall outlet before cleaning.
  • Wipe the charging station and LED light strip gently with a dry cloth. Do not use liquids.
  • Povremeno provjeravajte kabel za napajanje na bilo kakve znakove oštećenja. Ako je oštećen, prekinite upotrebu i kontaktirajte korisničku podršku.

Opšta njega:

  • Periodically check all screws and fasteners to ensure they remain tight. Retighten as needed.
  • Verify the anti-tipping device is securely attached to both the dresser and the wall.
  • Avoid placing hot items directly on the dresser surface. Use coasters or protective pads.

Rješavanje problema

If you encounter issues with your dresser, refer to the following common problems and solutions:

LED svjetla ne rade:

  • Provjerite snagu: Ensure the dresser's main power cord is securely plugged into a functional wall outlet.
  • Provjerite veze: Verify that the LED light strip is properly connected to its controller and the power source.
  • Funkcija kontrolera: If using the app, ensure your device is paired correctly. Try using the physical button to rule out app issues.
  • Resetovati: Unplug the dresser from the wall for 30 seconds, then plug it back in to reset the electrical components.

Stanica za punjenje ne daje napajanje:

  • Provjerite snagu: Confirm the dresser's main power cord is plugged into a live wall outlet. Test the outlet with another device.
  • Kompatibilnost uređaja: Ensure your device is compatible with the charging station's output (110V/15A for AC, 5V/2A for USB).
  • preopterećenje: Avoid plugging in too many high-power devices simultaneously, which could trip an internal circuit breaker (if present) or the household breaker.
  • Resetovati: Unplug the dresser from the wall for 30 seconds, then plug it back in.

Ladice se zaglavljuju ili se ne zatvaraju glatko:

  • Provjerite poravnanje: Ensure the drawer is properly seated on its slides. Remove the drawer and reinsert it carefully.
  • Prepreke: Look for any items inside the drawer or along the slides that might be blocking movement.
  • Zategnutost hardvera: Verify that all screws securing the drawer slides to both the drawer and the dresser frame are tight. Loose screws can cause misalignment.
  • Nivo površina: Ensure the dresser is placed on a level surface. An uneven surface can cause the frame to twist slightly, affecting drawer operation.

Specifikacije

FeatureSpecifikacija
BrandIDEALNA KUĆA
Broj modela4qEsFnuE-HUyPAfIv7518A9pyG5cZ
MaterijalEngineered Wood
Tip završetkaPolirano
Dimenzije proizvoda (D x Š x V)15.5" x 53.9" x 37.8"
Broj ladica6 (plus 2 open top compartments)
Težina artikla141.1 funti
Stanica za punjenje3 AC utičnice (110V/15A), 2 USB porta (5V/2A)
Dužina kabla za napajanje6.56 ft
LED svjetlaRGB, App/Button Control, Adjustable Brightness, Multiple Modes
Obavezna montažaDa
UPC820061110513

Garancija i podrška

For warranty information and customer support, please refer to the documentation included with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.

Proizvođač: IDEALNA KUĆA

© 2026 IDEALHOUSE. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.