West Biking B0GLD9NTPC

West Biking Electric Bike Pump User Manual

Model: B0GLD9NTPC

Marka: West Biking

1. Uvod

Thank you for choosing the West Biking Electric Bike Pump. This compact and portable pump is designed for efficient and accurate inflation of bicycle tires, motorcycle tires, and various inflatables. Featuring a digital display, auto shut-off, and dual valve compatibility, it provides a convenient solution for maintaining optimal tire pressure. Please read this manual carefully before use to ensure proper operation and safety.

2. Šta se nalazi u kutiji

  • West Biking Electric Bike Pump
  • Kabel za punjenje
  • Travel Pouch
  • Inflation Hose with Presta Valve Adapter
  • Adapter za kugličnu iglu

3. Specifikacije

FeatureSpecifikacija
BrandBiciklizam na zapadu
ModelB0GLD9NTPC
BojaCrna
MaterijalPlastika
Izvor napajanjaNapajanje na baterije (punjivo)
Maksimalni pritisak130 PSI (funta po kvadratnom inču)
Kapacitet baterije900 mAh (ugrađena)
TežinaPribližno 169 g
Dimenzije7.9cm x 5.2cm x 3cm (cca.)
Kompatibilnost ventilaPresta and Schrader

4. Sigurnosne informacije

  • This device is for inflating air only. Do not use it for flammable gases or other liquids.
  • Čuvati izvan dohvata djece. Ovo nije igračka.
  • Do not expose the pump to extreme temperatures, direct sunlight, or moisture.
  • Avoid over-inflating. Always check the recommended pressure for your item. The auto shut-off feature helps prevent over-inflation, but manual monitoring is advised.
  • Ne koristite pumpu ako je oštećena ili neispravna.
  • Ensure the inflation hose is securely connected to both the pump and the valve before starting inflation.
  • The pump may become warm during prolonged use. Allow it to cool down if it feels excessively hot.

5. Podešavanje

5.1 Punjenje pumpe

Before first use, fully charge the pump. Connect the provided charging cable to the pump's charging port and a suitable USB power source. The smart indicator light will show the charging status and extinguish when fully charged.

West Biking Electric Bike Pump with smart charging indicator light

Image: The pump features a smart indicator light that shows charging status. The light extinguishes when fully charged.

5.2 Razumijevanje ekrana i kontrola

The pump features a clear digital display and intuitive buttons for operation.

West Biking Electric Bike Pump display and control buttons

Slika: Detaljna view of the pump's digital display showing pressure value, pressure unit, battery level, and control buttons for mode selection, increase/decrease, and power/start.

  • Dugme za napajanje: Press and hold to power on/off. Press once to start/stop inflation.
  • Dugme za način rada (M): Single-click to switch between preset inflation modes (e.g., bicycle, motorcycle, ball). Double-click to switch gas units (PSI, BAR, kg/cm²).
  • Strelice gore/dolje: Press and hold or click once to increase/decrease the target pressure value.

6. Uputstvo za upotrebu

6.1 Uključivanje i podešavanje pritiska

  1. Press and hold the Power button to turn on the pump. The digital display will illuminate.
  2. Single-click the Mode (M) button to cycle through preset inflation modes (e.g., bicycle, motorcycle, ball).
  3. Double-click the Mode (M) button to select your desired pressure unit (PSI, BAR, or kg/cm²).
  4. Use the Up/Down arrow buttons to set your target pressure.
West Biking Electric Bike Pump digital display showing pressure

Image: The digital display shows real-time pressure monitoring and allows for setting target pressure values.

6.2 Connecting to Valves

The pump supports both Presta and Schrader valves. Use the appropriate connection method:

West Biking Electric Bike Pump valve compatibility for Presta and Schrader

Image: Illustration showing how to connect the pump to both Presta and Schrader valves using the included adapter for Presta.

  • Za Schrader ventile: Directly screw the inflation hose onto the Schrader valve stem until secure.
  • Za Presta ventile: First, loosen the tip of the Presta valve. Then, screw the small Presta valve adapter onto the Presta valve stem. Finally, screw the inflation hose onto the adapter until secure.

6.3 Početno naduvavanje

  1. Once the target pressure is set and the hose is securely connected, press the Power button once to start inflation.
  2. The pump will begin inflating, and the digital display will show the real-time pressure.
  3. The pump features an auto shut-off function. It will automatically stop once the preset pressure is reached.
  4. To manually stop inflation at any time, press the Power button again.
West Biking Electric Bike Pump with auto shut-off feature

Image: The pump automatically stops inflation once the preset pressure is achieved, preventing over-inflation.

Video: This video demonstrates the operation of the West Biking Electric Bike Pump, including setting pressure and inflating a tire. It highlights the compact size and ease of use.

6.4 After Inflation

  1. Carefully unscrew the inflation hose from the valve. For Presta valves, remove the adapter first, then tighten the valve tip.
  2. Press and hold the Power button to turn off the pump.
  3. Store the pump and accessories in the provided travel pouch.

7. Održavanje

  • čišćenje: Wipe the pump with a soft, dry cloth. Do not use harsh chemicals or immerse the pump in water.
  • Skladištenje: Čuvajte pumpu na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura. Prije dugotrajnog skladištenja provjerite je li potpuno napunjena kako biste produžili vijek trajanja baterije.
  • Održavanje baterije: Recharge the battery regularly, even if not in use, to maintain optimal performance. Avoid completely draining the battery frequently.

8. Otkrivanje problema

ProblemMogući uzrokRješenje
Pumpa se ne uključujeSlaba baterija; Dugme za napajanje nije pravilno pritisnutoCharge the pump fully; Press and hold the power button for 3 seconds
Pump does not inflateHose not securely connected; Target pressure not set; Valve issueEnsure hose is tightly screwed onto valve; Set a target pressure; Check valve for damage or blockage
Netačno očitavanje pritiskaLoose connection; Sensor malfunctionEnsure hose is tightly connected; Contact customer support if issue persists
Pumpa se neočekivano zaustavljaTarget pressure reached (auto shut-off); Low battery; OverheatingCheck if target pressure is met; Recharge the pump; Allow pump to cool down

9. Garancija

This West Biking Electric Bike Pump comes with a 90-dnevna garancija od datuma kupovine. Ova garancija pokriva proizvodne nedostatke pri normalnoj upotrebi. Ne pokriva štetu uzrokovanu nepravilnom upotrebom, nezgodama, neovlaštenim modifikacijama ili normalnim habanjem. Molimo sačuvajte dokaz o kupovini za reklamacije u slučaju garancije.

10. Podrška

For further assistance, technical support, or warranty inquiries, please contact West Biking customer service through the retailer where you purchased the product or visit the official West Biking store on Amazon:

Visit the West Biking Store on Amazon

© 2026 West Biking. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.