Rebel Electro RBA-2003-S Bevel Steel Training Bench User Manual

1. Važne informacije o sigurnosti

Read all instructions carefully before assembling and using the training bench. Keep this manual for future reference.

• Konsultujte se sa lekarom pre nego što započnete bilo koji program vežbanja.
• Prije svake upotrebe provjerite jesu li svi vijci i matice sigurno zategnuti.
• Nemojte prekoračiti maksimalnu težinu korisnika od 120 kg (264 lbs).
• Place the bench on a flat, stable surface.
• Držite djecu i kućne ljubimce podalje od opreme tokom upotrebe.
• Inspect the bench for worn or damaged parts before each use. Do not use if damaged.
• Koristite ispravne tehnike dizanja kako biste izbjegli ozljede.

2. Sadržaj paketa

Prije sastavljanja provjerite jesu li sve komponente prisutne. Ako bilo koji dijelovi nedostaju ili su oštećeni, obratite se korisničkoj podršci.

• Sklop glavnog okvira
• Podloga za naslon
• Jastuk za sjedala
• Prednja noga za podršku
• Zadnja potporna noga
• Adjustment Pins/Knobs
• Pribor za montažu (vijci, podloške, matice)
• End Caps for Feet

3. Upute za sastavljanje

Follow these steps to assemble your Rebel Electro RBA-2003-S Training Bench. It is recommended to have two people for assembly.

1. Step 1: Attach Front and Rear Support Legs
   Securely attach the front and rear support legs to the main frame using the provided bolts and nuts. Ensure they are stable.
   

   Image: The training bench frame with its front and rear support legs securely attached, ready for further assembly.
2. Step 2: Install Seat Pad
   Attach the seat pad to the designated area on the main frame using the appropriate hardware. Ensure it is firmly secured.
3. Step 3: Install Backrest Pad
   Connect the backrest pad to the adjustable mechanism on the main frame. Ensure the pivot points are correctly aligned and secured with pins or bolts.
   

   Slika: Krupni plan view of the backrest adjustment mechanism, showing the pin inserted into one of the adjustment slots.

4. Step 4: Attach End Caps
   Press the plastic end caps onto the ends of the support legs to protect floors and provide stability.
5. Korak 5: Konačna provjera
   Before first use, double-check all connections to ensure they are tight and secure. Test the stability of the bench.

4. Operating Instructions: Adjusting the Bench

The Rebel Electro RBA-2003-S bench offers 7 levels of backrest tilt adjustment and a fixed seat position for various exercises.

4.1 Podešavanje naslona

To adjust the backrest angle:

1. Locate the adjustment pin or knob at the base of the backrest support.
2. Pull the pin out or loosen the knob to disengage it from the adjustment rail.
3. Carefully move the backrest to your desired angle. The bench offers 7 distinct tilt levels.
4. Once the desired angle is reached, re-insert the pin or tighten the knob securely into one of the adjustment slots. Ensure it is fully engaged before use.

Slika: Sa strane view of the training bench illustrating the backrest adjustment rail with multiple slots for different angles.

Image: The training bench shown in an upright position (left) and an inclined position (right), demonstrating two of the available backrest angles.

Image: The training bench fully flattened, suitable for exercises requiring a horizontal surface.

4.2 Sklapanje radi skladištenja

To fold the bench for compact storage:

1. Ensure the backrest is in its lowest (flat) position.
2. Identify any quick-release pins or folding mechanisms on the frame.
3. Disengage these mechanisms and carefully fold the bench components inward.
4. Secure any locking pins to keep the bench in its folded state.

Image: The training bench in a folded configuration, demonstrating its compact form for storage.

5. Održavanje

Redovno održavanje osigurava dugotrajnost i siguran rad vaše klupe za vježbanje.

• čišćenje: Wipe down the faux leather seat and backrest with a damp Nakon svake upotrebe obrišite krpom kako biste uklonili znoj i prljavštinu. Po potrebi koristite blagi sapun, a zatim obrišite suhom krpom.
• inspekcija: Periodically check all bolts, nuts, and adjustment pins for tightness. Tighten any loose fasteners. Inspect the frame for cracks or damage, and the upholstery for tears or excessive wear.
• podmazivanje: If adjustment mechanisms become stiff, apply a small amount of silicone-based lubricant to the moving parts.
• Skladištenje: Klupu čuvajte na suhom i hladnom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

6. Otkrivanje problema

Ako naiđete na probleme sa svojom klupom za vježbanje, pogledajte sljedeće uobičajene probleme i rješenja:

• Klupa se čini nestabilnom:

  Ensure all assembly bolts are fully tightened. Verify the bench is on a flat, level surface. Check that all four feet are making firm contact with the floor.
• Teškoće s podešavanjem naslona:

  Ensure the adjustment pin is fully disengaged before attempting to change the angle. Check for any obstructions in the adjustment rail. Apply a small amount of lubricant if the mechanism is stiff.

• Škripavi zvukovi tokom upotrebe:

  Tighten all bolts and nuts. Lubricate any pivot points or moving parts with a silicone-based lubricant.

7. Specifikacije

8. Garancija i podrška

This product is covered by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the retailer.

For technical support, missing parts, or warranty claims, please contact Rebel Electro customer service through their official webweb-mjestu ili prodavaču gdje je proizvod kupljen.

Molimo sačuvajte dokaz o kupovini u svrhu garancije.