BTMETER DT100B LED Stroboscope Tachometer Instruction Manual

1. Uvod

The BTMETER DT100B LED Stroboscope Tachometer is a precision instrument designed for non-contact measurement of rotational speed (RPM/FPM) and for observing moving objects as if they were stationary. It features high accuracy, a wide measurement range, and bright LED illumination, making it suitable for various industrial and automotive applications. This manual provides essential information for the safe and effective use of your device.

Figure 1: BTMETER DT100B LED Stroboscope Tachometer

2. Šta se nalazi u kutiji

• 1 x BTMETER DT100B LED Stroboscope
• 1 x Uputstvo za upotrebu
• 1 x USB kabl za punjenje

Figure 2: Stroboscope with included USB charging cable.

3. Značajke proizvoda

• Beskontaktno mjerenje: Measures rotational speed from 60-999999 RPM/FPM without physical contact.
• visoka preciznost: Provides measurements with 0.001% accuracy.
• Real-time Observation: Allows stationary observation of moving objects by synchronizing strobe frequency.
• Data Storage & Review: Podržava snimanje i ponovnoviewuzimanje mjernih podataka.
• Zero-out Function: One-click button to ensure measurement accuracy.
• Podešavanje faze: For precise control of the observed position.
• Jarko osvjetljenje: Equipped with a 1500 lux LED light, with dimmable brightness.
• Prijenosni dizajn: Lightweight (320g) and handheld with a built-in rechargeable 2200mA lithium battery for up to 8 hours of continuous operation.

Figure 3: Key features of the BTMETER DT100B Stroboscope.

4. Proizvod je gotovview

Slika 4: Prednja i gornja strana view of the BTMETER DT100B with labeled components.

1. Stroboscopic Rate Adjustment Rotary Dial: Used to adjust the flashing light frequency.
2. Strobe Rate/Clear Button: Adjusts strobe rate or clears data.
3. Relative Adjustment Button: For fine-tuning adjustments.
4. Flicker Rate Increase/Decrease Digital Bit Display: Shows the current flicker rate.
5. Prikaz napajanja baterije: Označava preostali vijek trajanja baterije.
6. LED Strobe Projection Light Source: The light array for illumination.
7. REV/HZ/LM Display: Shows measurement units (RPM/FPM, Hz, Lux).
8. Dugme za uključivanje / isključivanje: Uključuje ili isključuje uređaj.
9. Dugme za prebacivanje M načina rada: Switches between measurement modes.
10. USB sučelje: Za punjenje uređaja.

5. Podešavanje

5.1 Punjenje uređaja

Before initial use, ensure the stroboscope is fully charged. Connect the provided USB charging cable to the USB interface (10) on the device and to a standard USB power adapter (not included). The battery power display (5) will indicate charging status. A full charge provides approximately 8 hours of continuous operation.

5.2 Uključivanje/isključivanje

Press and hold the Power On/Off button (8) to turn the device on or off.

6. Uputstvo za upotrebu

6.1 Basic Measurement Procedure

1. Uključeno: Turn on the stroboscope using the Power On/Off button (8).
2. Cilj: Direct the LED strobe light source (6) towards the rotating object you wish to measure or observe.
3. Podesite frekvenciju: Rotate the Stroboscopic Rate Adjustment Rotary Dial (1) to adjust the flashing light frequency. Observe the object.
4. Sinhroniziraj: Continue adjusting the frequency until the moving object appears visually stationary or moving very slowly.
5. Očitavanje mjerenja: Once synchronized, the rotational speed (RPM/FPM) and frequency (Hz) will be displayed on the screen.

Figure 5: How the LED Stroboscope works to measure speed.

6.2 Pohranjivanje i review

The device supports data recording and review. Refer to the on-screen prompts and the 'M' Mode Switch Button (9) for navigating data storage functions. Typically, pressing 'M' allows you to select between saving, recalling, or clearing data.

Figure 6: Data storage and review interfejs.

6.3 Zero-out Function

To ensure measurement accuracy, use the one-click zero-out button (part of Strobe Rate/Clear button 2) as needed before or during measurement.

6.4 Phase Adjustment

The phase adjustment function allows you to precisely control the observed position of the object, which can be useful if the object is partially obscured or for detailed inspection of different parts of the rotating component.

6.5 Podešavanje svjetline

The LED light brightness is dimmable. Use the appropriate controls (refer to the display or specific buttons if available) to adjust the illumination for optimal viewing uslovi.

Figure 7: The 1500 Lux LED illumination array.

6.6 Aplikacije

The BTMETER DT100B is widely used in various applications including gear meshing inspection, spinning machinery analysis, HVAC system diagnostics, paper making, printing industry, turbine inspection, and troubleshooting of driving motors and fans.

Figure 8: Wide range of applications for the stroboscope.

7. Održavanje

• čišćenje: Za čišćenje uređaja koristite meku, suhu krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: Store the stroboscope in a cool, dry place away from direct sunlight and extreme temperatures.
• Održavanje baterije: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device regularly, especially if it will not be used for an extended period.
• Izbjegnite udar: Zaštitite uređaj od padova i udaraca, koji mogu oštetiti unutrašnje komponente.

8. Otkrivanje problema

9. Specifikacije

10. Zvanični video proizvoda

11. Garancija i podrška

The BTMETER DT100B LED Stroboscope comes with a 365-day quality warranty. BTMETER also provides doživotna tehnička podrška for this product. For any inquiries, technical assistance, or warranty claims, please contact BTMETER customer service through their official channels or the retailer where the product was purchased.