darkFlash TH285

Uputstvo za upotrebu za darkFlash TH285 ATX Mid-Tower kućište za PC igre

Model: TH285

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash TH285 ATX Mid-Tower PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

darkFlash TH285 ATX Mid-Tower kućište za PC igre

Slika 1.1: Prednja strana view of the darkFlash TH285 ATX Mid-Tower PC Gaming Case.

2. Sadržaj paketa

Prije nego što nastavite s instalacijom, provjerite da li su sve komponente prisutne:

  • darkFlash TH285 ATX Mid-Tower kućište za PC igre
  • 4x darkFlash Air12X 120mm ARGB PWM ventilatora (unaprijed instalirani)
  • Kutija s priborom (vijci, vezice za kablove, odstojnici, uputstvo za upotrebu)

3. Specifikacije

FeatureSpecifikacija
Naziv modelaTH285
Tip slučajaMid-Tower
Podrška za matičnu pločuATX, M-ATX, ITX
Dimenzije (D x Š x V)Približno 20.27 x 17.79 x 14.09 inča
MaterijalMetal, Plastika, Kaljeno staklo
GPU ClearanceDo 415 mm
Visina CPU hladnjakaDo 160 mm
Podrška radijatoraTop: 240/280mm, Side: 280/240mm, Bottom: 360mm
Podrška fanovimaUp to 7x 120mm fans (4x 120mm ARGB PWM pre-installed)
Drive Bays3.5" HDD x2, 2.5" SSD x3
Slotovi za proširenje7
I/O portoviUSB 3.0 x1, USB 2.0 x2, HD Audio
darkFlash TH285 Case Dimensions and Component Clearances

Image 3.1: Diagram illustrating key dimensions and component clearances for the TH285 case.

4. Features Overview

  • Visoke performanse protoka zraka: Designed with multiple intake and exhaust pathways for optimal cooling efficiency.
  • Pre-Installed ARGB PWM Fans: Includes four darkFlash Air12X 120mm ARGB PWM fans for effective cooling and customizable lighting.
  • puna-View Tempered Glass Design: Front, top, and side panels are constructed from tempered glass to showcase internal components.
  • Spacious Compatibility & Dual-Chamber Layout: Supports large GPUs (up to 415mm) and 360mm radiators. The dual-chamber design separates the PSU and cables for improved thermal performance and aesthetics.
  • Top I/O for Easy Access: Conveniently located USB ports and audio jacks on the top panel.
  • Practical Maintenance: Features removable dust filters and ample cable routing options.

5. Postavljanje i instalacija

5.1. Priprema slučaja

  1. Pažljivo izvadite kutiju iz njenog pakovanja.
  2. Postavite kućište na stabilnu, ravnu površinu.
  3. Remove the tempered glass side panels by unscrewing the thumb screws at the rear and gently pulling them away from the chassis. Set them aside on a soft, protected surface to prevent scratches.
Removing tempered glass side panel

Image 5.1: Illustration of removing the tempered glass side panel.

5.2. Instalacija matične ploče

  1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (ATX, M-ATX, ITX).
  2. Place your motherboard onto the standoffs, aligning the screw holes.
  3. Pričvrstite matičnu ploču priloženim vijcima.

5.3. GPU (Graphics Processing Unit) Installation

  1. Remove the required number of PCI slot covers from the rear of the case.
  2. Insert your GPU into the appropriate PCIe slot on your motherboard.
  3. Secure the GPU to the case with screws. The case supports GPUs up to 415mm in length.
GPU PCI Slots

Slika 5.2: Pozadi view showing the 7 PCI expansion slots for GPU and other expansion cards.

5.4. Instalacija pogona za pohranu podataka

The TH285 supports 2x 3.5" HDDs and 3x 2.5" SSDs.

  1. Locate the drive bays in the dual-chamber area of the case.
  2. For 2.5" SSDs: Mount the SSDs to the designated brackets using the provided screws.
  3. For 3.5" HDDs: Slide the HDDs into the drive cages and secure them with screws.
Storage Drive Bays

Slika 5.3: Unutrašnje view highlighting the locations for 2.5" SSDs and 3.5" HDDs.

5.5. Instalacija jedinice za napajanje (PSU)

  1. Position the PSU in its dedicated compartment at the rear of the case.
  2. Pričvrstite napajanje vijcima sa vanjske strane kućišta.

5.6. Ugradnja ventilatora i radijatora

The case comes with 4x 120mm ARGB PWM fans pre-installed. Additional fans or radiators can be installed as follows:

  • Vrh: Supports up to 2x 140mm or 2x 120mm fans, or a 240/280mm radiator.
  • strana: Supports up to 2x 140mm or 3x 120mm fans, or a 280/360mm radiator.
  • dno: Supports up to 3x 120mm fans, or a 360mm radiator.
Radiator Support Diagram

Image 5.4: Diagram illustrating radiator and fan placement options.

5.7. Upravljanje kablovima

Utilize the cable routing cutouts and tie-down points in the dual-chamber area to organize cables. This improves airflow and maintains a clean interior aesthetic.

5.8. Priključci I/O panela

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Vrhunski I/O portovi

Image 5.5: Close-up of the top-mounted I/O panel featuring USB 3.0 and audio ports.

6. Upravljanje kućištem

6.1. Uključivanje

Once all components are installed and connected, press the power button on the top I/O panel to start your system.

6.2. ARGB kontrola ventilatora

The pre-installed ARGB PWM fans can be controlled via your motherboard's software if it supports Addressable RGB (ARGB) and PWM fan control. Connect the ARGB cables to the appropriate 3-pin 5V ARGB header and the PWM fan cables to 4-pin fan headers on your motherboard.

7. Održavanje

7.1. Čišćenje filtera za prašinu

The TH285 case includes removable dust filters to prevent dust buildup. Regularly clean these filters by gently removing them and washing them with water or brushing off accumulated dust. Ensure they are completely dry before re-installing.

7.2. Generalno čišćenje

Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panels. For stubborn smudges on glass, a mild glass cleaner can be applied to the cloth (not directly to the glass) and then wiped clean.

8. Otkrivanje problema

  • Sistem se ne uključuje: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Verify the PSU switch is in the 'ON' position. Check front panel power button connection to the motherboard.
  • Fans are not spinning or ARGB lighting is not working: Confirm fan PWM and ARGB cables are correctly connected to the motherboard headers. Check motherboard software for fan speed and lighting control settings.
  • Nema izlaza za prikaz: Ensure the GPU is properly seated in its PCIe slot and connected to power. Verify the monitor cable is connected to the GPU, not the motherboard integrated graphics (unless using integrated graphics).

9. Garancija i podrška

For warranty information and technical support, please refer to the darkFlash official webweb-mjesto ili kontaktirajte lokalnog prodavača. Sačuvajte dokaz o kupovini za slučaj reklamacije.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.