RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Uvod

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Podešavanje

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Raspakivanje i početni pregled

• Pažljivo izvadite sve komponente iz pakovanja.
• Provjerite da li su prisutni svi artikli navedeni na listi za pakovanje.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Povezivanje kontrolera

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Napajanje preko Etherneta (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Eksterni adapter za napajanje: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Priključci kamere:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Slika 2.2: Primjerample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Konfiguracija mreže

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web interfejs unošenjem njegove IP adrese u a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• U okviru web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Operacija

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Prekoview of Controls

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Slika 3.2: Detaljno view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Odabir kamere

• Dugmad za brzi odabir: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Numerička tastatura: For cameras beyond the quick select buttons (up to 255), press the CAM ID button, then enter the camera number using the numeric keypad, and press ENTER.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 PTZ kontrola

• džojstik: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• PT dugme za brzinu: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview način rada.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Pritisnite AUTO FOCUS button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 Unaprijed zadane postavke

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ENTER spasiti. Pritisnite ESC za izlaz.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ENTER to recall. Press ESC za izlaz.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Navigacija izbornikom

• Dugme MENU: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ENTER confirms selections, and ESC acts as a back button.

4. Održavanje

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Čišćenje

• Use a soft, dry cloth to clean the exterior of the controller.
• Za tvrdokornu prljavštinu, lagano dampOperite krpu vodom ili blagim, neabrazivnim sredstvom za čišćenje.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Skladištenje

• When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Zaštitite uređaj od prašine i vlage.

5. Otkrivanje problema

Ovaj odjeljak pruža rješenja za uobičajene probleme s kojima se možete susresti.

5.1 Nema napajanja

• Provjerite izvor napajanja: Provjerite je li adapter za napajanje sigurno spojen i na kontroler i na ispravnu utičnicu.
• Provjera PoE-a: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Integritet kabla: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Mrežna povezanost: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Neusklađenost protokola: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• ID kamere: Ensure the correct camera ID is selected on the controller.
• Akreditivi za prijavu: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web interfejs.
• Serijska veza: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webstranica za ažuriranja.

5.3 LCD Display Issues

• Bez prikaza: Provjerite je li kontroler uključen.
• Zatamnjeni ekran: Check if there are any brightness settings on the controller that can be adjusted.

6. Specifikacije

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Video demonstracija proizvoda

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Garancija i podrška

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official website.

• Proizvođač: Xiamen RGBlink Science & Technology Co.,Ltd.
• Službeno Webstranica: www.rgblink.com (Napomena: Ovo je rezervirano mjesto URL, please refer to your product packaging or official documentation for the correct support website.)
• Kontakt informacije: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.