Uvod
Thank you for choosing the BLNAN Flat LED Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read it thoroughly before use and retain it for future reference.
Sigurnosne informacije
- Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or cleaning.
- Instalaciju treba izvršiti kvalificirani električar ako niste sigurni u vezi električnih instalacija.
- Osigurajte voltage supply matches the requirements specified for this product (230V).
- Ovaj proizvod je namijenjen samo za upotrebu u zatvorenom prostoru. Ne izlažite ga vodi ili visokoj vlažnosti.
- Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
- Držite materijale za pakovanje van domašaja dece.
Sadržaj paketa
Molimo provjerite da li su sve komponente prisutne i neoštećene:
- 1 x BLNAN Flat LED Ceiling Light
- 1 x Uputstvo za upotrebu (Ovaj dokument)
- Mounting hardware (screws, wall anchors, wire connectors)
Specifikacije proizvoda
| Brand | BLNAN |
| Broj modela | LS-CL-I4-24W--CCT/N |
| Snaga | 24 Watts |
| Lumen Output | 2400 lumena |
| Temperatura boje | 2000K (Night Light), 3000K (Warm White), 4000K (Neutral White), 5000K (Cool White) |
| Voltage | 230 Volts |
| Materijal | Polikarbonat |
| Dimenzije proizvoda (DxŠxV) | 30 cm x 30 cm x 2.5 cm |
| Životni vijek | Preko 30,000 sati |
| Vrsta montaže | Ugradna montaža, Montaža na plafon |
| Posebne karakteristike | Adjustable Color Temperature, Night Light Function, Memory Function, Over-voltage, short-circuit, and overheat protection |
| Preporučena upotreba prostorije | Balcony, Bedroom, Kitchen, Office, Basement, Bathroom, Living Room, Hallway |
Uputstva za instalaciju
Before beginning installation, ensure the power supply is turned off at the circuit breaker.
- Pripremite rasvjetno tijelo: Rotate the light fixture counterclockwise to detach the mounting base from the main lamp tijelo.
- Odaberite temperaturu boje: Before mounting, locate the small switch on the back of the lamp body. Use this switch to select your desired main light color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White). This setting is fixed after installation.
- Fix the Mounting Base: Position the mounting base on the ceiling where you intend to install the light. Mark the screw holes. Drill pilot holes if necessary and secure the mounting base to the ceiling using the provided screws and wall anchors. Ensure the screw distance is approximately 7cm-9cm.
- Povežite žice: Carefully connect the electrical wires from your ceiling to the corresponding terminals on the mounting base. Typically, this involves connecting the Live (L), Neutral (N), and Ground (E) wires. Ensure all connections are secure.
- Pričvrstite L.amp tijelo: Align the main lamp body with the installed mounting base. Push the lamp body upwards and rotate it clockwise until it locks securely into place.
Uputstvo za upotrebu
Main Light and Night Light Function
This ceiling light features a main light mode (24W, 2400LM) and a unique 2000K amber night light mode (5W).
- To activate Main Light: Turn your wall switch ON. The light will illuminate in the previously selected main color temperature (3000K/4000K/5000K).
- To activate Night Light: Quickly toggle your wall switch OFF and then ON again (ON-OFF-ON sequence). The light will switch to the soft 2000K amber night light mode.
- To return to Main Light: Toggle your wall switch OFF and then ON again from the night light mode.
Funkcija memorije
The light features a memory function that recalls the last selected lighting mode (main light or night light).
- Turn on the ceiling light and select your desired lighting mode.
- Keep the light in this mode for at least 30 seconds.
- Turn off the light for at least 10 seconds.
- The next time you turn on the light, it will automatically restore the previously selected mode.
Održavanje
- čišćenje: Prije čišćenja provjerite je li napajanje isključeno. Koristite meku, suhu ili blago natopljenu krpu.amp krpu za brisanje površine rasvjetnog tijela. Nemojte koristiti abrazivna sredstva za čišćenje, rastvarače ili jake hemikalije, jer mogu oštetiti završnu obradu.
- Zamjena žarulje: This LED ceiling light uses integrated LED chips that are designed for long-term use (over 30,000 hours) and are not user-replaceable.
- inspekcija: Periodically check the light fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. | Nema napajanja. Slabo ožičenje. Neispravan zidni prekidač. | Provjerite osigurač. Provjerite da li su sve žice sigurno spojene (prvo isključite napajanje). Testirajte zidni prekidač s drugim uređajem. |
| Svetlo treperi. | Nestabilno napajanje. Slabo ožičenje. | Ensure stable power. Check wiring connections (power off first). |
| Night light mode does not activate. | Nepravilan redoslijed prebacivanja. | Ensure a quick ON-OFF-ON sequence on the wall switch. |
| Main light color temperature cannot be changed. | Color temperature is set during installation. | The main light color temperature (3000K/4000K/5000K) is selected via a switch on the back of the lamp before installation and cannot be changed during normal operation. |
Informacije o garanciji
This BLNAN product comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact your retailer for specific terms, conditions, and duration of the warranty.
Korisnička podrška
For technical assistance, troubleshooting not covered in this manual, or any other inquiries, please contact your retailer or visit the official BLNAN websajt za podršku.