Aipas C2 Uputstvo za upotrebu električnog bicikla

1. Uvod

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your Aipas C2 Electric Bike. Please read this manual thoroughly before your first ride and retain it for future reference. Adherence to these instructions will ensure optimal performance and longevity of your electric bike.

1.1. Sigurnosne smjernice

• Tokom vožnje uvijek nosite kacigu.
• Perform a pre-ride inspection, including brakes, tires, and battery charge.
• Upoznajte se s lokalnim prometnim zakonima i propisima koji se odnose na električne bicikle.
• Ne upravljajte biciklom pod utjecajem alkohola ili droga.
• Prije svake vožnje provjerite jesu li sve komponente sigurno pričvršćene.

2. Sadržaj paketa

Your Aipas C2 Electric Bike package includes the following components. Please verify all items are present upon unboxing.

• Aipas C2 Electric Bike (partially assembled)
• 48V 11AH baterija
• Punjač baterija
• Prednji točak
• Prednji branik
• Far
• Pedale
• Toolkit
• Uputstvo za upotrebu

Image: The Aipas C2 Electric Bike, showcasing its main components including the frame, wheels, and integrated baskets.

3. Postavljanje i montaža

Your Aipas C2 Electric Bike comes 95% pre-assembled. Follow these steps to complete the assembly process.

3.1. Instalacija upravljača

1. Loosen the stem and riser screws on the bike's head tube.
2. Turn the riser forward and center it, then tighten all three bolts securely.
3. Remove all bolts from the handlebar clamp.
4. Attach the handlebar to the stem and reinstall the clamp screws, ensuring the handlebar is centered and firm.

3.2. Front Wheel, Fender, and Headlight Installation

1. Remove the fixing screw and washer from the front fork.
2. Install the headlight and fender by passing the bolt through the headlight, fender, and mounting bar.
3. Center the headlight and adjust the fender height while tightening the nut and bolt.
4. Remove the silver front fender screws and attach the fender arms to both sides of the front fork.
5. Carefully align the front wheel rotor between the brake caliper pads.
6. Reinstall spacers with the locking pin facing the correct direction and tighten axle nuts.

3.3. Display Installation

1. Remove the two screws and nuts from the display mount to prevent losing them.
2. Install the display on the handlebar, ensuring it is centered and properly positioned for visibility.
3. Insert the nuts and tighten with the screws.

3.4. Ugradnja pedale

1. Identify each pedal by the sticker or marking on the pedal axle (R for Right, L for Left).
2. Install the right pedal by turning clockwise.
3. Install the left pedal by turning counterclockwise.

3.5. Steering Adjustment

1. Loosen the stem screw and align the handlebars and front wheel together.
2. Ensure the handlebars are perpendicular with the frame and front wheel.
3. Tighten the stem screw securely.

3.6. Battery Insertion

1. Insert the key into the lock and turn it while pressing the safety button to remove the battery.
2. Carefully insert the battery into its compartment.
3. Reinstall the battery and tap it to ensure it's securely in place. Use the key to lock it.

4. Operating Your Aipas C2 Electric Bike

Understand the functions of your electric bike for an optimal riding experience.

4.1. Powering On and Display Functions

Press and hold the power button on the handlebar control panel to power up the display screen. The smart display provides real-time ride data including speed, power output, Pedal Assist System (PAS) level, and distance traveled. It also features a USB charging port for convenience.

Image: The Aipas C2 Electric Bike's smart display, showing ride data and the integrated USB charging port.

4.2. Pedal Assist System (PAS) and Throttle

• PAS Levels: The bike features 5 levels of pedal assist. Adjust the PAS level using the control buttons on the handlebar to vary the motor's assistance while pedaling. Level 1 provides minimal assistance, while Level 5 offers maximum power, reaching speeds of 28 MPH or higher.
• Leptira za gas: The throttle provides power on demand without pedaling. Use it for quick acceleration or when you need a boost without effort.

4.3. Gear Shifting and Braking

• 7-brzinski mjenjač: Utilize the 7-speed derailleur system to adapt to various terrains and riding conditions. Shift gears smoothly using the twist grip shifter on the handlebar.
• Disk kočnice: The Aipas C2 is equipped with dual 180mm Zoom disc brakes for reliable stopping power. Always apply brakes gently and evenly to maintain control.

5. Održavanje

Regular maintenance ensures the safety and longevity of your Aipas C2 Electric Bike.

5.1. Briga o bateriji i punjenje

• The 48V 12.8AH battery has an IP65 waterproof rating, but avoid submerging it in water.
• Napunite bateriju pomoću priloženog punjača. Potpuno punjenje obično traje 4-6 sati.
• Store the battery in a cool, dry place and avoid extreme temperatures.

5.2. Tlak u gumama

Maintain proper tire pressure for optimal performance and safety. Refer to the sidewall of your 26-inch resistant tires for recommended PSI ranges. Regularly check and inflate tires as needed.

5.3. Inspekcija kočnica

Periodically inspect the brake pads and rotors for wear. Ensure brake levers engage smoothly and provide adequate stopping power. Adjust or replace components as necessary.

5.4. Opće čišćenje i podmazivanje

Redovno čistite svoj bicikl pomoću oglasaamp cloth and mild soap. Lubricate the chain and other moving parts as recommended by standard bicycle maintenance practices.

6. Otkrivanje problema

This section addresses common issues you might encounter with your Aipas C2 Electric Bike.

• Bicikl se ne uključuje: Check if the battery is fully charged and securely inserted. Ensure the key is in the 'on' position if applicable.
• Motor ne pomaže: Verify the PAS level is set above 0. Check all electrical connections for looseness.
• Brakes squeaking: This can be normal for new disc brakes. If persistent, ensure rotors are clean and pads are properly aligned. Consult a professional if the issue continues.
• Wobbly wheels or loose spokes: This indicates a need for wheel truing. It is recommended to have this serviced by a qualified bicycle mechanic.

For issues not covered here, please contact Aipas customer support.

7. Specifikacije

Image: Visual representation of the Aipas C2 Electric Bike's key dimensions and specifications, including recommended rider height and load capacity.

8. Garancija i podrška

Aipas is committed to providing quality products and customer satisfaction.

8.1. Informacije o garanciji

Your Aipas C2 Electric Bike comes with a 1 godine garancije covering quality-related issues. Please retain your proof of purchase for warranty claims.

8.2. Korisnička podrška

For technical guidance, troubleshooting assistance, or warranty inquiries, please contact our customer service team:

• Telefon: 1(833)532-5966 (Mon-Fri, 9:00 AM - 5:30 PM PST)
• Email: service@aipasbike.com (Responses within 24 hours)

Također možete posjetiti Aipas Store for additional resources and to activate your warranty.