CREWORKS 10L Ultrasonic Cleaner User Manual

1. Uvod

This manual provides essential information for the safe and effective operation of your CREWORKS 10L Ultrasonic Cleaner. This machine is designed for thorough cleaning of various items such as lab tools, glasses, jewelry, auto parts, and more, utilizing ultrasonic cavitation and heating capabilities.

Please read this manual carefully before initial use and retain it for future reference.

2. Sigurnosne informacije

Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja:

• Nemojte rastavljati: Unauthorized disassembly may void the warranty and pose electrical hazards.
• Always use sufficient fluid: Ensure the tank is filled to the recommended level before operation to prevent damage to the ultrasonic transducers.
• Avoid flammable liquids: Never use flammable, explosive, or corrosive liquids in the tank.
• Isključite kada nije u upotrebi: Disconnect the power cord from the outlet when the unit is not in use or before cleaning.
• Pravilna ventilacija: Osigurajte adekvatnu ventilaciju oko uređaja tokom rada.
• Držati suvim: Do not immerse the main unit in water or other liquids. Avoid splashing water onto the control panel.

Slika: Front view of the CREWORKS 10L Ultrasonic Cleaner, showing the control panel and a yellow warning label on the lid.

3. Komponente i karakteristike

Your CREWORKS 10L Ultrasonic Cleaner includes the following main components:

• Ultrasonic Cleaner Unit (main body with tank)
• Basket (for holding items during cleaning)
• Kabl za napajanje
• Water Pipe (drain valve attachment)

Ključne karakteristike uključuju:

• 10L (2.6 Gallon) Capacity: Large stainless steel tank for various items.
• 240W Ultrasonic Power: Generates 40kHz sound waves for effective cavitation.
• Snaga grijanja 300 W: Adjustable temperature from 70 to 175°F (20-80°C) for enhanced cleaning.
• Kontrola tajmera: Adjustable cleaning cycles up to 30 minutes.
• Izdržljiva konstrukcija: Stainless steel tank (304 grade) and exterior (201 grade).
• tihi rad: Extra-thick tank wall for noise reduction (below 60 dB).
• Stabilan dizajn: Non-skid rubber feet for secure placement.

Slika: Prekoview of key features including control knobs, stainless steel construction, fuses, and dissipation holes.

Slika: Unutrašnjost view of the stainless steel tank, highlighting the 304 food-grade stainless steel construction.

4. Podešavanje

1. Raspakirajte: Carefully remove all components from the packaging. Inspect the unit for any signs of damage.
2. plasman: Postavite ultrazvučni čistač na stabilnu, ravnu i suhu površinu. Osigurajte odgovarajuću ventilaciju oko uređaja.
3. Connect Drain Valve (if applicable): Attach the provided water pipe to the drain valve on the side of the unit if you plan to use it for draining.
4. Napunite rezervoar: Fill the stainless steel tank with the appropriate cleaning solution (water, or water with a suitable ultrasonic cleaning concentrate) up to the recommended fill line. Do not overfill or underfill. Ensure the items to be cleaned are fully submerged.
5. Umetni korpu: Place the cleaning basket into the tank.
6. Priključite napajanje: Uključite kabl za napajanje u uzemljenu električnu utičnicu.

5. Uputstvo za upotrebu

Follow these steps to operate your ultrasonic cleaner:

1. Pripremite artikle: Place the items to be cleaned into the cleaning basket. Ensure items are not touching each other if possible, and are fully submerged in the cleaning solution.
2. Zatvori poklopac: Close the lid of the ultrasonic cleaner.
3. Podešavanje temperature (opciono): If heating is desired, turn the "TEMPERATURE" knob to select the desired temperature between 70°F and 175°F (20°C and 80°C). The heating indicator light will illuminate. Allow time for the solution to reach the set temperature.
4. Postavite vrijeme čišćenja: Turn the "TIME" knob to select the desired cleaning duration, up to 30 minutes. The cleaning indicator light will illuminate, and the ultrasonic cleaning process will begin.
5. Monitoring procesa: The unit will operate for the set time. You may hear a slight buzzing sound, which is normal during ultrasonic operation.
6. Završetak: Once the set time has elapsed, the unit will automatically stop. The indicator lights will turn off.
7. Ukloni stavke: Carefully open the lid and remove the cleaning basket with the cleaned items. Rinse items thoroughly with clean water if necessary and dry them.
8. Rješenje za odvodnjavanje: After cleaning, it is recommended to drain the used cleaning solution. Place a suitable container under the drain valve and open the valve to empty the tank. Close the valve once empty.

Image: Illustration of how ultrasonic cavitation works to clean items by forming and bursting microscopic bubbles.

Slika: pramples of items suitable for cleaning with the ultrasonic cleaner, such as glasses, machine parts, and tools.

6. Održavanje

Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner:

• Ispraznite i očistite rezervoar: After each use, especially if using cleaning solutions other than water, drain the tank completely. Rinse the tank interior with clean water and wipe it dry with a soft cloth. Do not use abrasive cleaners or scourers.
• Eksterijerno čišćenje: Obrišite vanjski dio jedinice s oglasomamp tkanina. Nemojte koristiti jake hemikalije.
• Skladištenje: Čuvajte jedinicu na hladnom i suvom mestu kada se ne koristi.
• Zamjena osigurača: The unit is equipped with protective fuses. If the unit fails to power on, check and replace the fuses if necessary. Refer to the specifications for fuse type.

7. Otkrivanje problema

Ako naiđete na probleme s ultrazvučnim čistačem, pogledajte sljedeće uobičajene probleme i rješenja:

• Uređaj se ne uključuje:
  • Provjerite je li kabel za napajanje sigurno uključen u ispravnu električnu utičnicu.
  • Provjerite je li prekidač za napajanje u položaju "UKLJUČENO".
  • Check the fuses. Replace if blown.
• No ultrasonic action (no buzzing sound):
  • Osigurajte da je rezervoar napunjen dovoljnom količinom tečnosti.
  • Check if the timer is set and the unit is powered on.
  • Obratite se korisničkoj podršci ako se problem nastavi.
• Cleaning results are unsatisfactory:
  • Ensure the cleaning solution is appropriate for the items being cleaned.
  • Povećajte vrijeme čišćenja.
  • Consider using heat to improve cleaning effectiveness.
  • Ensure items are not overcrowded in the basket.

8. Specifikacije

Image: Dimensional drawing of the ultrasonic cleaner and its basket.

9. Garancija i podrška

For warranty information or technical support, please contact CREWORKS customer service. Keep your purchase receipt and model number (JX-040) handy when contacting support.

You can find contact information on the official CREWORKS webweb-mjestu ili putem vašeg prodajnog mjesta.