1. Uvod
This manual provides essential information for the safe and efficient use of the Generic LED Driver 300mA 18-36W Constant Current Power Supply Module. Please read these instructions carefully before installation and operation. Keep this manual for future reference.
2. Sigurnosne informacije
- Električna opasnost: Installation and wiring should only be performed by qualified personnel. Ensure power is disconnected before any installation or maintenance.
- Non-Isolated Design: This is a non-isolated LED driver. Exercise extreme caution during handling and operation to avoid electrical shock. Do not touch the circuit board when power is applied.
- Voltage Kompatibilnost: Proverite da li je ulazna voltage of the driver matches your local power supply (AC200-240V for this model).
- Podudaranje opterećenja: Ensure the connected LED load's voltage and current requirements are within the driver's specified output range (DC54-110V, 300mA). Overloading can damage the driver and LEDs.
- Uslovi okoline: Do not expose the driver to excessive moisture, dust, or extreme temperatures outside its operating range.
3. Proizvod je gotovview
The Generic LED Driver is a compact, constant current power supply module designed for various LED lighting applications. It features a lightweight design for easy installation and efficient heat dissipation for long-term operation. Its durable shell provides resistance to impact and corrosion, and it is designed for silent operation.
Ključne karakteristike:
- Lagani dizajn: Compact size for easy installation and space saving.
- Niska proizvodnja topline: Efficient heat dissipation ensures long-term operation without overheating.
- Tihi rad: No noise interference, suitable for use in quiet environments.
- Izdržljiva školjka: Resistant to impact and corrosion, extending service life.
- Waterproof and Moisture-proof: Adaptable to various environments.
4. Specifikacije
Refer to the image below for detailed electrical and physical specifications.
Image 1: LED Driver dimensions and electrical specifications. This image shows the driver's physical dimensions (33mm x 20mm x 13mm) and key electrical parameters: Power (18-36W), Input voltage (AC200-240V), Output voltage (DC54-110V), Output current (300mA ±5%), and No load output voltage (DC314V max).
- Broj modela: JCUIUCCCC-18-36W-300MA
- Ulazni voltage: AC200-240V
- Output Voltage: DC54-110V
- Izlazna struja: 300mA ±5%
- Snaga: 18-36W
- Izlaz bez opterećenja Voltage: DC314V (max)
- Dimenzije: Otprilike 33 mm x 20 mm x 13 mm
- Težina: Približno 13 g
- Materijal: Smart IC + PCB
5. Podešavanje i ožičenje
Follow these steps for proper installation and wiring. Ensure all power is disconnected before proceeding.
Image 2: LED Driver wiring diagram. This diagram illustrates the connection points for the LED driver. The input wires (white) connect to the AC200-240V voltage input terminal. The output wires (red and white) connect to the LED load, with the red wire being the DC positive pole (+) and the white wire being the DC negative pole (-).
- Isključite napajanje: Turn off the main power supply to the circuit where the LED driver will be installed.
- Identifikujte žice: The driver has two sets of wires:
- Ulazne žice: Typically white, these are for connecting to the AC power supply (AC200-240V).
- Izlazne žice: Typically red and white, these are for connecting to the LED load. The red wire is the DC positive (+) output, and the white wire is the DC negative (-) output.
- Spoji ulaz: Connect the input wires of the LED driver to your AC200-240V power source. Ensure secure connections using appropriate connectors or terminal blocks.
- Spoji izlaz: Connect the red output wire of the driver to the positive (+) terminal of your LED load. Connect the white output wire of the driver to the negative (-) terminal of your LED load. Ensure correct polarity to prevent damage to the LEDs.
- Sigurna instalacija: Mount the LED driver in a suitable, well-ventilated location, away from direct heat sources or flammable materials. Ensure it is protected from physical damage.
- Vrati snagu: Nakon što su svi priključci sigurni i provjereni, vratite napajanje u strujno kolo.
6. Uputstvo za upotrebu
Once properly installed, the LED driver operates automatically. It converts the AC input voltage to a constant DC current suitable for powering compatible LED loads.
- Uključeno: Apply AC power to the input terminals. The connected LEDs should illuminate.
- Izlaz konstantne struje: The driver maintains a stable 300mA output current, ensuring consistent brightness and extending the lifespan of your LEDs within its specified voltage range.
- Nadgledanje: Observe the LEDs for proper illumination. If they do not light up or flicker, refer to the troubleshooting section.
7. Održavanje
The LED driver is designed for minimal maintenance. However, periodic checks can help ensure its longevity and performance.
- čišćenje: Ensure the driver remains free of dust and debris. If cleaning is necessary, disconnect power and use a dry, soft cloth. Do not use liquid cleaners.
- Provjere veze: Povremeno provjeravajte spojeve ožičenja kako biste bili sigurni da su čvrsti i bez korozije.
- Uslovi okoline: Verify that the operating environment continues to meet the recommended conditions (temperature, humidity).
- Pregled oštećenja: If the driver's casing appears damaged or if you notice any unusual odors or sounds, disconnect power immediately and replace the unit.
8. Otkrivanje problema
If you encounter issues with your LED driver, consult the following table:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| LED diode ne svijetle | Nema ulazne snage Incorrect wiring (input/output) Faulty LED load Kvar drajvera | Provjerite napajanje i osigurač. Verify all wiring connections and polarity. Test LEDs with a known good driver or power source. Replace the driver if other checks fail. |
| LED diode trepere ili se prigušuju | Nestabilna ulazna snaga Labave veze Overloaded driver Incompatible LED load | Ensure stable AC input voltage. Provjerite i zategnite sve ožičenja. Verify total LED wattage is within driver's 18-36W range. Ensure LED voltage range (DC54-110V) matches driver output. |
| Driver is hot to touch | Loša ventilacija Overloaded driver Visoka temperatura okoline | Ensure adequate airflow around the driver. Reduce LED load if exceeding 36W. Relocate driver to a cooler environment. |
Ako problem i dalje postoji nakon što ste pokušali pronaći ova rješenja, obratite se korisničkoj podršci ili kvalificiranom električaru.
9. Garancija i podrška
For warranty information and technical support, please refer to the product's purchase documentation or contact the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.