mGYDY Bafang 810S LCD eBike Display User Manual

1. Uvod

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Sigurnosne informacije

• Uvijek provjerite je li ekran sigurno montiran prije vožnje.
• Do not attempt to disassemble or modify the display. This may void the warranty and cause damage.
• Držite ekran dalje od ekstremnih temperatura i direktne sunčeve svjetlosti tokom dužeg perioda.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Pay attention to your surroundings while riding. Do not become overly distracted by the display.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. Proizvod je gotovview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

slika: Gotovoview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

Ključne karakteristike:

• Color VA LCD: Široko viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• Sveobuhvatan prikaz podataka: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltage percentagi).
• Podesiva svjetlina: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• Način hodanja: Provides assistance when walking alongside your e-bike.
• Prikaz koda greške: Indicates system faults.
• Vodootporna ocjena: IP65, resistant to rain and splashing water.

5. Specifikacije

slika: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. Postavljanje i instalacija

Provjera kompatibilnosti:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the UART komunikacioni protokol i a 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

slika: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

Koraci instalacije:

1. Montirajte ekran: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. Povežite kabl: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. Upravljanje kablovima: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. Početno uključivanje: After installation, power on your e-bike to verify the display functions correctly.

7. Uputstvo za upotrebu

The 810S display features an intuitive interface with an independent button for navigation and settings.

Funkcije prikaza:

• Indikator brzine: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Mileage Indicator: Displays Odometer (total distance), Trip distance, and Riding Time.
• Indikator baterije: Provides a 5-level power indicator and voltage percentage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• Kontrola farova: Activate or deactivate your e-bike's headlight (if connected).
• Način hodanja: Engage for low-speed assistance when pushing the bike.
• Šifra greške: Prikazuje kodove ako se otkrije sistemska greška.

slika: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

Podešavanje postavki:

• Postavka svjetline: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• Lozinka za uključivanje: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

slika: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. Održavanje

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• čišćenje: Koristite meku, damp krpu za čišćenje ekrana. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače koji bi mogli oštetiti ekran iliasing.
• Otpornost na vodu: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• Skladištenje: When not in use for extended periods, store the e-bike and display in a dry, cool place, away from direct sunlight and extreme temperatures.
• Provjera veze: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

slika: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9. Otkrivanje problema

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• Ekran se ne uključuje:
  • Provjerite je li baterija električnog bicikla napunjena i uključena.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• Prikazani kod greške:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• Netačna očitavanja:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

If problems persist, contact the seller or a qualified e-bike technician for assistance.

10. Garancija i podrška

Za informacije o garanciji i korisničkoj podršci, molimo pogledajte dokumentaciju koju ste dobili prilikom kupovine ili se obratite prodavaču. Sačuvajte dokaz o kupovini za potrebe reklamacije.