Uputstvo za upotrebu za K5ADH 5 QT kuku za tijesto s premazom

1. Proizvod je gotovview

This manual provides essential information for the installation, operation, and maintenance of the K5ADH 5 QT Coated Dough Hook. This high-quality replacement part is designed to fit various 5-quart stand mixers from brands such as Whirlpool and KitchenAid, ensuring reliable performance for your kneading needs.

The K5ADH dough hook is specifically engineered for mixing and kneading yeast doughs, such as bread, pizza, and pasta dough, efficiently and thoroughly.

2. Važne informacije o sigurnosti

• Always unplug the stand mixer before attaching or removing the dough hook.
• Ensure the mixer is turned off and the speed control is set to "OFF" before handling attachments.
• Keep hands, hair, and loose clothing away from moving parts during mixer operation.
• Do not operate the mixer with a damaged dough hook. Inspect the hook for any signs of wear or damage before each use.
• This dough hook is designed for specific 5-quart stand mixer models. Verify compatibility before use to prevent damage to the mixer or attachment.

3. Postavljanje i instalacija

Follow these steps to properly install the K5ADH dough hook onto your stand mixer:

1. Priprema: Ensure your stand mixer is unplugged and turned off. Lift the mixer head (if applicable) or tilt it back to access the attachment hub.
2. Identify the Dough Hook: The K5ADH dough hook is a C-shaped or spiral-shaped attachment, typically coated for non-stick properties.


Slika 3.1: Prednja strana view of the K5ADH 5 QT Coated Dough Hook, showing its C-shape and white coating.

3. Pričvrstite kuku: Align the shaft of the dough hook with the attachment shaft on your mixer. Push the hook upwards onto the shaft, then rotate it counter-clockwise until it locks into place. You should feel a slight click or resistance indicating it's securely fastened.

Slika 3.2: Donja strana view of the K5ADH Dough Hook, highlighting the attachment point designed to fit the mixer's shaft.
4. Provjera sigurnosti: Gently pull down on the dough hook to ensure it is firmly attached and will not detach during operation.
5. Donja glava miksera: If you lifted or tilted the mixer head, return it to the operating position and secure it.

4. Uputstvo za upotrebu

Once the K5ADH dough hook is securely installed, you can begin mixing. Refer to your stand mixer's original instruction manual for specific speed settings and mixing times for various dough types.

• Dodavanje sastojaka: Place all dry and wet ingredients into the mixing bowl before lowering the mixer head or attaching the bowl.
• Pokretanje miksera: Plug in the mixer. Start at a low speed (e.g., Speed 2 for KitchenAid mixers) to combine ingredients, then gradually increase to the recommended speed for kneading.
• Kneading Process: The dough hook is designed to pull, stretch, and fold dough, developing gluten for optimal texture. Knead for the duration specified in your recipe.
• Zaustavljanje miksera: Always turn the mixer off and unplug it before scraping down the bowl or removing the dough hook.

5. Održavanje i njega

Proper care will extend the life of your K5ADH dough hook.

• čišćenje: After each use, remove the dough hook from the mixer. Wash it immediately with warm, soapy water. The coated surface is generally easy to clean.
• Sigurnost perilice posuđa: While some coated attachments are dishwasher safe, hand washing is recommended to preserve the coating and extend the life of the hook. Avoid abrasive cleaners or scouring pads that could damage the coating.
• Sušenje: Thoroughly dry the dough hook before storing to prevent water spots or potential corrosion on the metal shaft.
• Skladištenje: Store the dough hook in a dry place, preferably with your mixer attachments, to prevent damage.

6. Otkrivanje problema

If you encounter issues with your K5ADH dough hook, consider the following:

• Hook Not Attaching Securely:
  • Uvjerite se da je mikser isključen.
  • Verify that the dough hook is correctly aligned with the mixer's attachment shaft and rotated fully into place.
  • Check for any debris or dough residue in the attachment hub or on the hook's shaft that might prevent a secure fit.
• Dough Not Mixing Properly:
  • Ensure the dough hook is the correct size (5 QT) for your mixer bowl.
  • Check that the mixer's bowl is properly seated and locked into place.
  • Adjust the mixer's speed according to your recipe and the type of dough.
• Neobična buka tokom rada:
  • Turn off and unplug the mixer immediately.
  • Inspect the dough hook and mixer for any obstructions or signs of damage.
  • Ensure the dough hook is securely attached and not wobbling.

7. Specifikacije

8. Garancija i podrška

Information regarding specific warranty coverage for this replacement part is not provided in the product details. For any support or warranty inquiries, please refer to the retailer or manufacturer from whom you purchased this item.

Always retain your proof of purchase for any potential claims.