JEYI PCIe 5.0 NVMe Heatsink

JEYI PCIe 5.0 M.2 NVMe Adapter Card with Aluminum Heatsink User Manual

Model: PCIe 5.0 NVMe Heatsink | Brand: JEYI

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the JEYI PCIe 5.0 M.2 NVMe Adapter Card with Aluminum Heatsink. This adapter is designed to expand high-speed storage capabilities in desktop, workstation, and server PCs by utilizing PCIe 5.0 slots for M.2 NVMe SSDs.

Sigurnosne informacije

Ensure your computer is powered off and unplugged before installation.
Discharge any static electricity from your body before handling components.
Handle the adapter card and SSDs with care to avoid damage to sensitive electronic components.
Refer to your motherboard's manual for specific PCIe slot information and compatibility.

Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

JEYI PCIe 5.0 to M.2 NVMe Adapter Card
Standardni visinski nosač
Low Profile Zagrada
Odvijač
Thermal Pads (3 pieces)
Vijci za montažu (8 komada)
Heatsink Securing Screw

JEYI PCIe 5.0 M.2 NVMe Adapter Card package contents including the adapter, brackets, screwdriver, thermal pads, and screws.

Image: Contents of the JEYI PCIe 5.0 M.2 NVMe Adapter Card package. It includes the adapter card, standard and low-profile brackets, a screwdriver, thermal pads, and various screws for installation.

Postavljanje i instalacija

Follow these steps to install your M.2 NVMe SSD onto the adapter card and then install the card into your computer.

1. SSD Installation onto Adapter Card

Remove Heatsink Screws: Locate and remove the screws securing the aluminum heatsink to the adapter card. Carefully detach the heatsink.
Video: This video demonstrates the unboxing and installation process for the JEYI PCIe 5.0 M.2 NVMe Adapter Card. It shows how to remove the heatsink, install an M.2 SSD, and secure the bracket.
Insert M.2 NVMe SSD: Gently insert your M.2 NVMe SSD into the M.2 slot on the adapter card. Ensure it is fully seated.
Image: Step-by-step visual guide for installing the M.2 SSD onto the adapter card, including inserting the SSD and securing it with a screw.
Sigurni SSD: Use the provided screw to secure the M.2 NVMe SSD in place on the adapter card.
Nanesite termalne jastučiće: Place the thermal pads onto the M.2 NVMe SSD, ensuring good contact with the SSD's chips.
Ponovo pričvrstite hladnjak: Carefully place the aluminum heatsink back onto the adapter card, aligning it with the screw holes. Secure it with the previously removed screws.
Pričvrstite nosač: Choose the appropriate bracket (standard or low-profile) for your PC case. Attach it to the adapter card using the provided screws.

2. Adapter Card Installation into PC

Isključivanje računara: Shut down your computer completely and unplug the power cord.
Otvorite kućište računara: Uklonite bočnu ploču kućišta računara.
Pronađite PCIe slot: Identify an available PCIe 5.0/4.0 x4, x8, or x16 slot on your motherboard.
Image: The JEYI PCIe 5.0 M.2 NVMe Adapter Card shown installed within a desktop computer's PCIe slot.
Insert Adapter Card: Carefully align the adapter card with the chosen PCIe slot and press down firmly until it is securely seated.
Sigurnosni nosač: Secure the adapter card's bracket to the PC case with the appropriate screw.
Zatvori kućište računara: Replace the side panel of your computer case and reconnect the power cord.

Uputstvo za upotrebu

The JEYI PCIe 5.0 M.2 NVMe Adapter Card is designed for plug-and-play functionality, requiring no additional drivers for most modern operating systems.

Prva upotreba: Upon booting your computer, the operating system (Windows 10/11, Linux, macOS) should automatically detect the newly installed M.2 NVMe SSD.
Inicijalizacija diska: For a new SSD, you may need to initialize and format the drive through your operating system's Disk Management utility before it appears as usable storage. Refer to your OS documentation for specific steps.
Performanse: To achieve maximum throughput (up to 128Gbps or 16GB/s), ensure your motherboard and CPU support PCIe 5.0, and the entire data path adheres to PCIe 5.0 specifications. The adapter is backward compatible with PCIe 4.0/3.0/2.0 slots, operating at the speed of the lowest common denominator.
Image: A visual representation comparing the bandwidth of PCIe 5.0 (10000+ MB/s) with PCIe 4.0 (6000+ MB/s), highlighting the ultra-high speed capability of Gen5.
Image: A screenshot of CrystalDiskMark benchmark results, illustrating read and write speeds exceeding 10000 MB/s, demonstrating the high performance of the adapter with a compatible SSD.
Pokretački disk: The adapter card can support an M.2 NVMe SSD as a boot drive, provided your motherboard's BIOS/UEFI supports booting from PCIe NVMe devices. Consult your motherboard manual for details.

Održavanje

The JEYI PCIe 5.0 M.2 NVMe Adapter Card is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.

Uklanjanje prašine: Periodically open your PC case and use compressed air to gently remove any dust accumulation from the adapter card and heatsink. Dust can impede heat dissipation.
Thermal Pad Integrity: If you notice unusual temperatures or performance degradation, inspect the thermal pads for wear or damage. Replace them if necessary.
Sigurne veze: Ensure all screws and connections remain tight. Loose components can lead to intermittent issues.

Diagram illustrating the airflow and heat dissipation method of the JEYI heatsink.

Image: A diagram showing the effective multiple heatsink method, illustrating how the heavy-duty aluminum heatsink with thermal compound pads and airflow notches dissipates heat from the M.2 NVMe SSD.

Rješavanje problema

Problem	Mogući uzrok	Rješenje
SSD not detected by OS.	Slaba veza. SSD not initialized/formatted. Incorrect PCIe slot used. Motherboard BIOS/UEFI settings.	Reseat the SSD and adapter card. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Ensure the adapter is in a compatible PCIe x4/x8/x16 slot. Check BIOS/UEFI for NVMe support and boot order.
Spore performanse.	Adapter in a lower PCIe generation slot. Thermal throttling. Outdated motherboard drivers/BIOS.	Ensure the adapter is in a PCIe 5.0 slot for maximum speed. Verify heatsink is properly installed with thermal pads. Check system airflow. Update motherboard BIOS and chipset drivers.
System instability/crashes.	Slaba veza. Pregrijavanje. Incompatible hardware.	Reseat the adapter card. Monitor SSD temperatures. Ensure adequate cooling. Verify motherboard and SSD compatibility.

Specifikacije

Feature	Detalj
Broj modela	PCIe 5.0 NVMe Heatsink
Hardversko sučelje	PCI Express 16 GB/s (PCIe 5.0 x4)
Brzina prijenosa podataka	Up to 128 Gigabits Per Second (16GB/s)
Kompatibilnost PCIe slotova	PCIe 5.0/4.0 x4, x8, x16 (backward compatible)
M.2 SSD Support	2280, 2260, 2242, 2230 M.2 NVMe SSDs (M Key)
Materijal hladnjaka	Aluminum with Thermal Pads
Kompatibilnost operativnog sistema	Windows 10/11, Linux, macOS
Dimenzije proizvoda	4.72"L x 2.09"W x 4.41"H (approx. 120mm x 53mm x 112mm)
Težina artikla	5.7 unci (0.16 kilograma)

Diagram showing dimensions and components of the JEYI PCIe 5.0 M.2 NVMe Adapter Card.

Image: Detailed diagram illustrating the dimensions of the JEYI PCIe 5.0 M.2 NVMe Adapter Card and its included components, such as brackets, screwdriver, thermal pads, and screws.

Garancija i podrška

JEYI products are designed for reliability and performance. For warranty information and technical support, please refer to the official JEYI webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu.

Politika povrata: Ovaj proizvod ispunjava uslove za povrat novca ili zamjenu u roku od 30 dana od kupovine.
Proizvođač: JEYI
Kontakt: Za dalju pomoć posjetite JEYI Store on Amazon ili pogledajte kontakt informacije navedene na pakovanju vašeg proizvoda.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.