Uputstvo za upotrebu ergonomske kancelarijske stolice Hbada P2

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your Hbada P2 Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product.

Sigurnosne informacije

This product requires assembly. Exercise caution during the assembly process. Always follow the correct usage methods outlined in this manual to prevent injury or damage to the product.

Sadržaj paketa

Before beginning assembly, ensure all components are present. Refer to the assembly diagram for a complete list of parts.

Image: Detailed assembly diagram showing all parts and steps for the Hbada P2 Office Chair.

Postavljanje i montaža

Follow these steps carefully to assemble your Hbada P2 Ergonomic Office Chair. Assembly instructions are included with the product.

1. Korak 1: Insert the footrest into the seat cushion from the rear. Slide it in until it clicks into place. (This step is not applicable if your model does not include a footrest).
2. Korak 2: Place the seat cushion upside down on a soft surface. Align the 6 screw holes and attach the gas lift cover. Then, insert the 6 screws and tighten them 3-4 turns. Do not fully tighten all screws yet.
3. Korak 3: Place the chair base onto the seat cushion. Align the 4 screw holes. Insert the 4 screws and tighten them 3-4 turns. Do not fully tighten all screws yet.
4. Korak 4: Attach the two screws to connect the backrest and seat base. Secure the backrest to the seat base.
5. Korak 5: Attach the backrest to the central hole of the seat base. Insert the 3 D-shaped screws and tighten them 3-4 turns. Do not fully tighten all screws yet.
6. Korak 6: After attaching the backrest, insert the gas lift into the base. Ensure the gas lift is securely seated. The gas lift helps support the chair's weight and allows for height adjustment. The gas lift cylinder may require some force to push it firmly into the base.
7. Korak 7: Attach the headrest to the backrest. The headrest features a slider for adjustment. If the headrest feels tight, apply some force to push it into position.
8. Završni korak: Once all components are in place, fully tighten all screws. Assembly is complete.

Upute za upotrebu i podešavanja

Your Hbada P2 chair offers multiple adjustment features for personalized comfort.

1. Podešavanje 3D lumbalne podrške

The 3D lumbar support provides targeted lower back protection. It features a 4-stage adjustment with 5cm vertical travel and approximately 5 degrees of floating movement to relieve pressure on your lower back.

Image: Diagram illustrating the 3D lumbar support with 10-degree follow, 5cm 4-stage lift, and 5-degree floating movement.

2. Podešavanje naslona za ruke od 360°

The armrests can be adjusted for height, depth, and rotation to suit various tasks and preferences.

• Podešavanje visine: Up to 75mm vertical travel.
• Podešavanje dubine: Up to 45mm front-to-back movement.
• rotacija: 360° rotation for optimal arm positioning.

Image: Diagram showing the 7.5cm height adjustment, 4.2cm front-back adjustment, and 360-degree rotation of the armrests.

3. 3D podešavanje naslona za glavu

The headrest is designed to fit your head and neck, reducing discomfort with multiple adjustment options.

• Podešavanje visine: Up to 13cm vertical travel.
• Surface Rotation: 180° rotation of the headrest surface.
• Frame Rotation: 40° rotation of the headrest frame.

Image: Diagram illustrating the 13cm height adjustment, 180-degree headrest surface rotation, and 40-degree headrest frame rotation.

4. Funkcija naginjanja

The chair features a 135-degree reclining function, allowing for comfortable rest during breaks.

Image: Illustration of the chair reclining at 105°, 120°, and 135° angles.

Održavanje

To ensure the longevity and optimal performance of your Hbada P2 office chair, follow these maintenance guidelines:

• Redovni pregled: Povremeno provjeravajte sve vijke i šrafove kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• Mrežasta tkanina za čišćenje: Clean the mesh fabric with a damp cloth and a mild soap solution. Avoid using harsh chemicals or abrasive cleaners, as these can damage the material.
• Njega kotačića: Održavajte kotačiće čistim od kose i ostataka kako biste osigurali nesmetano kretanje.
• plinski lift: Do not attempt to disassemble the gas lift cylinder. If it malfunctions, contact customer support.

Rješavanje problema

If you encounter any issues with your Hbada P2 office chair, refer to the following common problems and solutions:

• Stolica je nestabilna ili klimava: Ensure all assembly bolts and screws are fully tightened. Re-check the connections of the base and backrest.
• Height adjustment is difficult or not working: Verify that the gas lift is properly seated in the base and not obstructed. Ensure the lever mechanism is functioning correctly.
• Headrest or armrests are stiff to adjust: Check for any obstructions. Apply gentle, even force during adjustment. If the issue persists, ensure components were assembled correctly.
• Kotačići se ne kotrljaju glatko: Inspect the casters for any trapped hair, dust, or debris and remove them.

Ako ovi koraci za rješavanje problema ne riješe problem, obratite se korisničkoj podršci za daljnju pomoć.

Specifikacije

Slika: Prednja i bočna view of the Hbada P2 Office Chair with detailed dimensions in centimeters.

Garancija i podrška

Hbada is committed to providing high-quality products and customer satisfaction.

• Structural Components Warranty: A 5-year warranty is provided for the structural components of the chair.
• Politika povrata: Enjoy a 30-day return policy without specific reason.
• Damage Warranty: Repair or replacement warranty for damages upon arrival.
• Služba za korisnike: Korisnička služba dostupna je 24 sata dnevno.

For any warranty claims, technical support, or inquiries, please contact Hbada customer service through the retailer's platform where you purchased the product.

Image: Graphic indicating a 5-year warranty on structural components, with BIFMA, TUV, EUIPO, IGR, and SGS certifications.