Andeman EP-177
Andeman 4000A Jump Starter with 150PSI Air Compressor, Model EP-177 User Manual
Comprehensive instructions for operating and maintaining your Andeman EP-177 device.
1. Uvod
This manual provides essential information for the safe and effective use of your Andeman EP-177 4000A Jump Starter with 150PSI Air Compressor. Please read all instructions carefully before operation and retain this manual for future reference.

Image 1.1: Andeman EP-177 Jump Starter with Air Compressor and included accessories.
2. Šta se nalazi u kutiji
Provjerite da li su sve komponente prisutne u paketu:
- Epower-177 Jump Starter x1
- Gas Needle x1
- Gas Nozzle x2
- Korisnički vodič x1
- Jumper Cable x1
- Inflatable Tube x1
- Torba za pohranu x1
- Kabel za punjenje x1

Image 2.1: All items included in the Andeman EP-177 product package.
3. Značajke proizvoda
The Andeman EP-177 combines multiple functionalities for automotive and portable power needs:
- 4000A vršni startni uređaj: Može pokrenuti vozila od 12V sa benzinskim motorima do 8.5L ili dizel motorima od 7L.
- Kompresor zraka od 150 PSI: Integrated portable inflator for tires, sports equipment, and other inflatables.
- Power Bank od 24000mAh: High-capacity battery with Type-C Quick Charge and USB-A/USB-B outputs for charging electronic devices.
- Multi-Mode LED Light: Features standard illumination, SOS, and alert modes for various situations.
- 10 sigurnosnih zaštita: Advanced safety features including overload, spark, reverse polarity, and over-temperature protection.

Image 3.1: The Andeman EP-177 functioning as both a jump starter and a tire inflator.
4. Specifikacije
| Feature | Specifikacija |
|---|---|
| Brand | Andeman |
| Model | Epower-177 |
| Vršna izlazna struja | 4000 Amps |
| Kapacitet baterije | 24000mAh |
| Kompatibilnost motora | Do 8.5L benzina / 7L dizela |
| Pritisak kompresora zraka | Up to 150PSI |
| Charging Input (Type-C) | 5V/3A, 9V/2A, 12V/1.5A |
| USB-A izlaz | QC3.0 |
| USB-B izlaz | 5V/3A |
| DC izlaz | 15V |
| Dimenzije proizvoda | 1.97"D x 4.33"Š x 7.68"H |
| Težina artikla | 2.86 funte |
| Vrsta baterije | Lithium Ion |
5. Podešavanje
5.1 Početno punjenje
Before first use, fully charge the Andeman EP-177. Connect the provided charging cable to the Type-C input port on the device and to a suitable USB power adapter (not included). The device supports fast charging, reaching full capacity in approximately 1.8 hours. A 10-minute charge can provide enough power for an emergency jump start.

Image 5.1: Charging the Andeman EP-177 via its Type-C port.
5.2 Provjera nivoa baterije
The device features a digital display indicating the battery power percentage. Ensure the device is adequately charged before use, especially for jump-starting vehicles.
6. Uputstvo za upotrebu
6.1 Pokretanje vozila skokom
- Korak 1: Insert the jumper cable into the jump starter's port. Ensure a secure connection.
- Korak 2: Spojite crveni clamp na pozitivni (+) pol akumulatora vozila i crni clamp na negativni (-) pol akumulatora vozila.
- Korak 3: Once the green indicator light on the jumper cable connector illuminates, start the vehicle.
- Korak 4: Nakon što se vozilo pokrene, uklonite kratkospojnik clamps from the vehicle battery within 30 seconds, then disconnect the cable from the jump starter.

Image 6.1: Step-by-step guide for jump starting a vehicle.
6.2 Korištenje zračnog kompresora
- Korak 1: Press and hold the power button for 2 seconds to turn on the device. Short press to switch between on/pause.
- Korak 2: Choose the appropriate nozzle/needle and connect it to the inflatable tube, then attach to the item to be inflated.
- Korak 3: Short press the mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Use the "+" or "-" buttons to adjust the target pressure.
- Korak 4: Start inflation by short pressing the power button. The pump will stop automatically at the set pressure or when paused manually.
Napomena: For continuous use, allow the compressor to rest for 10 minutes after every 10 minutes of operation to prevent overheating.

Image 6.2: The Andeman EP-177 functioning as a tire inflator.
6.3 Korištenje kao Power Bank
The device can charge various electronic devices via its USB-A (QC3.0), USB-B (5V/3A), and Type-C (5V/3A, 9V/2A, 12V/1.5A) output ports. Connect your device using a compatible charging cable.

Image 6.3: The Andeman EP-177 used as a power bank to charge various devices.
6.4 Korištenje LED svjetiljke
The integrated LED light offers three modes:
- Standard Lighting: Provides continuous illumination.
- SOS način rada: Emits an SOS signal for emergency situations.
- Način upozorenja: Flashing light for increased visibility.
To activate or cycle through modes, press the dedicated flashlight button on the device.

Image 6.4: The Andeman EP-177's LED flashlight in use.
7. Sigurnosne mjere
Observe the following safety guidelines to prevent injury or damage to the device:
- Do not short-circuit the jump starter terminals.
- Ne izlažite uređaj ekstremnim temperaturama (ispod -20°C ili iznad 60°C).
- Nemojte rastavljati uređaj.
- Čuvati van domašaja djece.
- Ensure proper polarity when connecting to a vehicle battery (red to positive, black to negative).
- Remove jumper cables within 30 seconds after the vehicle starts.
- Avoid prolonged continuous use of the air compressor to prevent overheating.

Slika 7.1: Gotovoview od 10 sigurnosnih zaštita.
8. Održavanje
- Čuvajte uređaj na hladnom i suvom mestu dalje od direktne sunčeve svetlosti.
- Charge the device at least once every 3-6 months to maintain battery health, even if not in use.
- Očistite spoljašnjost mekom, damp tkanina. Nemojte koristiti jake hemikalije ili abrazivna sredstva za čišćenje.
- Provjerite da li su svi priključci bez prašine i ostataka.
9. Otkrivanje problema
- Uređaj se ne uključuje:
- Ensure the device is charged. Connect it to a power source and allow it to charge for a period.
- Vehicle does not start after jump-starting:
- Check battery connections for proper polarity and secure contact. Ensure the jump starter has sufficient charge. The vehicle battery may be severely damaged or the vehicle may have other mechanical issues.
- Air compressor is not inflating:
- Verify that the nozzle is correctly attached and the target pressure is set. Check the device's battery level. Ensure the power button has been pressed to start inflation.
- Device is overheating:
- Stop operation immediately and allow the device to cool down. This is particularly important for the air compressor after extended use.
10. Garancija i podrška
For warranty information and customer support, please refer to the contact details provided in your product packaging or visit the official Andeman webSačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.