Andeman 4000A Jump Starter (Model EP-166) User Manual

1. Uvod

Thank you for choosing the Andeman 4000A Jump Starter, Model EP-166. This device is designed to provide reliable power for jump-starting vehicles and charging electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

1.1. Šta se nalazi u kutiji

• Epower-166 Jump Starter Unit x1
• Smart Clamps x1
• Type-C kabel za punjenje x1
• Uputstvo za upotrebu x1
• Kutija za pohranu x1

Image: All components included in the Andeman Jump Starter package, laid out for clear visibility.

2. Sigurnosne mjere

Your safety is paramount. This device incorporates advanced safety features, but proper handling is crucial. The Andeman EP-166 is UL Certified, ensuring it meets stringent safety standards.

2.1. Integrated Safety Protections

The intelligent safety terminals feature 10 advanced protections:

• Zaštita od preopterećenja
• Spark Protection
• Zaštita od obrnutog punjenja
• Zaštita od reverzne polarnosti
• Zaštita od prekomjerne struje
• Zaštita od niske temperature
• Zaštita od prekomjernog punjenja
• Zaštita od kratkog spoja
• Over Voltage Zaštita
• Zaštita od visoke temperature

Slika: Interni view highlighting the 10 advanced safety protections integrated into the Andeman Jump Starter for secure operation.

2.2. Razmatranja životne sredine

• Raspon temperature: The device is engineered to operate in extreme temperatures, from -20°C (-4°F) to 60°C (140°F).
• Ocjena vodootpornosti: With an IP65 waterproof rating, the unit is resistant to rain and splashes. Avoid submerging the device in water.
• Trajnost: The design is drop-proof and sand-proof for enhanced durability in various environments.

3. Podešavanje

3.1. Punjenje Jump Startera

Before initial use, fully charge the jump starter. It features Type-C 3.0A Quick Charging technology, allowing a full charge from 0% to 100% in approximately 1.8 hours. Each complete charge provides up to 80 jump-starts.

• Connect the provided Type-C charging cable to the jump starter's input port.
• Drugi kraj kabla priključite na odgovarajući USB adapter za napajanje (nije uključen).
• LED displej će pokazati napredak punjenja.

Image: The jump starter being fast-charged via its Type-C port inside a vehicle, showing its quick recharge capability.

4. Uputstvo za upotrebu

4.1. Paljenje vozila pomoću kablova

1. Provjerite je li startni uređaj dovoljno napunjen.
2. Umetnite smart clamps cable into the jump starter's dedicated port.
3. Spojite crveni (+) clamp na pozitivni pol akumulatora vozila.
4. Spojite crni (-) clamp na negativni pol akumulatora vozila.
5. Check the indicator light on the smart clamps. A solid green light indicates it's safe to proceed. If it flashes red or beeps, refer to the troubleshooting section.
6. Pokrenite motor vozila.
7. Once the vehicle starts, remove the smart clamps from the vehicle battery within 30 seconds.
8. Isključite pametni ključamps cable from the jump starter.

Image: The Andeman Jump Starter connected to a car battery, illustrating the ease of use for jump-starting a vehicle.

4.2. Korištenje kao power bank

The 20000mAh capacity allows the jump starter to function as a power bank for various electronic devices.

• Connect your device's charging cable to one of the available USB output ports (USB-A: 2.1A; 5V/9V/12V or USB-B: 3A; 5V/2.1A).
• The dedicated Type-C port can also charge laptops at speeds comparable to their original adapters.
• LED ekran će prikazivati ​​preostali postotak baterijetage.

Image: The 20000mAh power bank feature in action, charging a laptop, smartphone, tablet, headphones, and smartwatch.

4.3. Korištenje LED svjetiljke

The built-in ultra-bright LED flashlight offers three lighting modes:

• svjetiljka: For general illumination (e.g., inspecting an engine, changing a tire).
• SOS: A life-saving signal light for emergencies.
• Stroboskop: A traffic warning light to alert oncoming traffic.

To activate and cycle through the modes, press the dedicated flashlight button on the unit.

Image: Illustration of the three versatile LED lighting modes: standard flashlight, SOS signal, and strobe, useful for various emergencies.

5. Održavanje

5.1. Punjenje i skladištenje

• Recharge the jump starter every 3-6 months if it is not in regular use to maintain battery health.
• Store the device in its protective storage box in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Otkrivanje problema

Smart clamps provide visual and audible feedback to help diagnose common issues:

7. Specifikacije

8. Zvanični videozapisi proizvoda

9. Garancija i podrška

For detailed warranty information and customer support, please refer to the user manual included in your product package. You may also contact Andeman customer service directly via email: andeman@andeman.com.